Quick Answer: A plastic Kipps apparatus, or Kipp’s generator, is a three-bulb gas generator that produces gas from a lump solid and a dilute acid on demand. Closing the outlet tap forces the acid away from the solid and stops the reaction, so gas is made only while it is being drawn off.
How the Three Bulbs Regulate Themselves
The listing image shows the classic form in white plastic: a top reservoir whose long stem runs down through the middle bulb into the bottom bulb, a side outlet with a tap and tubing on the middle bulb, and a small drain outlet on the lowest bulb. Lumps of solid, such as marble chips or granulated zinc, sit in the middle bulb. Acid poured into the top reservoir runs down to the bottom bulb and rises until it reaches the solid, at which point gas starts to form.
When the outlet tap is open, gas leaves as fast as it forms. With the tap shut, gas collecting in the middle bulb forces the liquid downward, off the solid and back up into the top reservoir. Nothing more is produced until the tap is reopened. That self-regulation made the Kipp’s generator the standard gas supply in school labs for generations.
A plastic body avoids the weight and breakage risk of the large glass generator. Check the plastic against the acid in use, and keep to reactions that run at room temperature between a lump solid and a dilute liquid. Gas can be collected in a gas jar over water in a pneumatic trough.
Care & Handling
- Use lumps, not powder; powder falls into the lower bulb, reacts continuously and cannot be stopped.
- Check that the tap and joints hold pressure when closed before leaving the apparatus charged.
- When making hydrogen, never ignite gas at the outlet until a collected test tube burns with a quiet pop, showing the air has been flushed out.
- Drain the acid and rinse all bulbs when the apparatus will stand unused.
Specifications
| Item | Three-bulb Kipp’s gas generator in plastic |
| Principle | Closing the outlet lets trapped gas drive the acid off the solid |
| Suitable reactions | Lump solid with dilute acid at room temperature |
| Outlets | Side outlet with tap; drain outlet on the lowest bulb (listing image) |
Applications
- Carbon dioxide from marble chips and dilute hydrochloric acid for limewater and extinguishing demonstrations
- Hydrogen from granulated zinc and dilute acid, collected over water
- Hydrogen sulfide, made from iron(II) sulfide with dilute acid, for qualitative analysis and only ever in a fume cupboard
- A steady gas supply for a class, drawn off in turn by opening the tap
Why Choose LabEquip
Chemistry teachers who prepare gases for demonstrations and class tests choose a Kipp’s generator for a supply they can start and stop at will. LabEquip lists this plastic version in its chemistry lab equipment range; ask about size through the contact page.
Related Products
- Kipps Gas Generating Apparatus, Clear Glass: A clear glass Kipps generator that shows the acid rising and falling more clearly for demonstrations.
- Kipps Gas Generating Apparatus, Borosilicate Glass: A borosilicate glass Kipps apparatus for labs that prefer glass for a wider range of reagents.
- Tubes, Delivery: Bent glass delivery tubes for carrying the gas from the outlet tap to a gas jar or test tube.
- Specimen Jar (Gas Jar), Plastic: A plastic gas jar for collecting the carbon dioxide or hydrogen produced by the generator.
Frequently Asked Questions
How does a plastic Kipps apparatus stop making gas?
When the outlet tap is closed, gas still forming in the middle bulb has nowhere to go. Its pressure pushes the acid down, off the solid and back up the long stem into the top reservoir. Once acid and solid no longer touch, the reaction stops until the tap is opened again.
Which gases can be made in a Kipps apparatus?
It suits gases made from a lump solid and a dilute acid at room temperature without heating: carbon dioxide from marble chips and dilute hydrochloric acid, and hydrogen from granulated zinc and dilute acid. Gases that need heating, or that come from powders or liquids only, cannot be made in it.
Why must the solid in a Kipps apparatus be in lumps?
The solid sits in the middle bulb and the acid must be able to drain away from it when the tap closes. Lumps leave gaps for the acid to flow back through. A powder would fall through into the lower bulb and keep reacting, so the generator could not stop and pressure could build dangerously.
Why choose a plastic Kipps apparatus instead of glass?
A plastic generator is lighter and does not shatter if knocked over, which matters with large volumes of acid on a school bench. It is a good choice for class sets and for students setting up gas preparations themselves. Glass versions show the reaction more clearly and resist a wider range of chemicals.
How is spent acid emptied from a plastic Kipps apparatus?
The lowest bulb has a small drain outlet, shown in the listing image. With the outlet tap open so the acid returns to the lower bulbs, place a container under the drain and release the spent acid slowly. Rinse with water before recharging with fresh acid and, if needed, fresh lumps of solid.
Is a plastic Kipps apparatus suitable for hydrogen sulfide?
Hydrogen sulfide is very toxic, so whatever the material, it must be generated only in a fume cupboard by staff trained to handle it. Many schools now avoid it entirely. For routine class work, carbon dioxide and hydrogen are the usual gases made in a plastic generator.
Last Updated: November 2026










Reviews
There are no reviews yet.