Search

In Stock

Industrial Funnels, Plastic

Internal Venting Ribs: Integrated vertical fluting prevents air-locking by facilitating continuous gas displacement, ensuring rapid, laminar liquid flow during high-velocity bulk container filling.

High-Density Polyethylene (HDPE) Architecture: Constructed from heavy-walled, medical-grade HDPE to provide exceptional impact resistance and broad chemical compatibility with oils, fuels, and concentrated industrial solvents.

$1.35

Quick Answer: An industrial plastic funnel is a large, sturdy funnel for transferring bulk volumes of liquid into carboys, drums and large bottles. The listing image shows a wide funnel with a side handle and a plain stem.

Sized for Bulk, Not for Filtering

Laboratory filter funnels are small, with a 60 degree cone and a narrow stem meant to support a paper filter. Moving several litres of distilled water, a bulk buffer or a stock of dilute acid into a carboy needs something else: a wide mouth that catches the whole stream from a large container, and a stem wide enough to let liquid through quickly. The industrial funnel is made for that job.

The handle shown in the image lets the funnel be held steady with one hand, or hung up to drain after use. The title gives no size or material; large funnels of this kind are commonly polypropylene or polyethylene, both of which resist water, aqueous salt solutions and dilute acids and alkalis. Check compatibility before pouring solvents or concentrated acids.

Use it to fill the plastic carboy with stopcock from a bulk container. For solids, the plastic powder funnel has a short, wide stem that suits powders better.

Specifications

Item Large plastic funnel for bulk liquid transfer
Handle Side handle, as shown in the listing image
Stem Wide stem for fast flow
Uses Filling carboys, drums and large bottles

Care & Handling

  • Leave an air gap between stem and container neck, or lift the funnel slightly, so air can escape and the funnel does not overflow.
  • Keep separate, labelled funnels for water, acids and solvents.
  • Rinse after each use and dry upside down.

Applications

  • Refilling distilled water carboys in a prep room
  • Pouring bulk buffer or salt solutions into dispensing containers
  • Transferring aqueous or solvent waste into collection containers
  • Filling large bottles of cleaning solution or detergent

Why Choose LabEquip

Prep rooms and lab stores that handle liquids in bulk use a large funnel for refilling carboys and waste containers. LabEquip lists it with its chemistry lab equipment; ask about size through the contact page.

Related Products

Frequently Asked Questions

What is an industrial plastic funnel used for in a laboratory?

It is used to transfer bulk volumes of liquid, such as distilled water, buffer or dilute stock solutions, into carboys, drums and large bottles. Its wide mouth catches the full stream from a large container, and its wide stem lets several litres pass quickly. The listing image shows a side handle and plain stem.

Why does liquid back up when filling a carboy through a funnel?

Air inside the carboy has to escape through the same neck that the funnel occupies. If the stem seals the neck, pressure builds and liquid backs up in the cone. Lift the funnel slightly or wedge a spacer beside the stem so air can escape, and pour at a steady rate rather than all at once.

Can an industrial funnel be used for filtration?

It is not designed for it. Filter funnels have a 60 degree cone that matches folded filter paper and a narrow stem, while an industrial funnel is sized for fast bulk flow. Use a filter funnel or Buchner funnel to remove solids, and the industrial funnel only to move clear liquids.

Should one industrial funnel be used for all liquids?

Keep separate, labelled funnels for different liquids, at least one for purified water and another for chemical solutions. A funnel that has carried acid or a buffer can contaminate distilled water even after rinsing. Colour tape on the handle is a simple way to keep them apart.

Which chemicals can safely go through a plastic industrial funnel?

Large funnels of this kind are commonly polypropylene or polyethylene, which resist water, salt solutions and dilute acids and alkalis. Check compatibility before pouring organic solvents or concentrated acids, and do not pour hot liquids, which can soften the plastic.

How should a large plastic funnel be cleaned and stored?

Rinse it at once after use, wash with mild detergent and a soft brush, then rinse with distilled water. Hang it by its handle to drain and dry, so dust does not collect in the cone and no water pools in the stem.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)