Quick Answer: An industrial plastic funnel is a large, sturdy funnel for transferring bulk volumes of liquid into carboys, drums and large bottles. The listing image shows a wide funnel with a side handle and a plain stem.
Sized for Bulk, Not for Filtering
Laboratory filter funnels are small, with a 60 degree cone and a narrow stem meant to support a paper filter. Moving several litres of distilled water, a bulk buffer or a stock of dilute acid into a carboy needs something else: a wide mouth that catches the whole stream from a large container, and a stem wide enough to let liquid through quickly. The industrial funnel is made for that job.
The handle shown in the image lets the funnel be held steady with one hand, or hung up to drain after use. The title gives no size or material; large funnels of this kind are commonly polypropylene or polyethylene, both of which resist water, aqueous salt solutions and dilute acids and alkalis. Check compatibility before pouring solvents or concentrated acids.
Use it to fill the plastic carboy with stopcock from a bulk container. For solids, the plastic powder funnel has a short, wide stem that suits powders better.
Specifications
| Item | Large plastic funnel for bulk liquid transfer |
| Handle | Side handle, as shown in the listing image |
| Stem | Wide stem for fast flow |
| Uses | Filling carboys, drums and large bottles |
Care & Handling
- Leave an air gap between stem and container neck, or lift the funnel slightly, so air can escape and the funnel does not overflow.
- Keep separate, labelled funnels for water, acids and solvents.
- Rinse after each use and dry upside down.
Applications
- Refilling distilled water carboys in a prep room
- Pouring bulk buffer or salt solutions into dispensing containers
- Transferring aqueous or solvent waste into collection containers
- Filling large bottles of cleaning solution or detergent
Why Choose LabEquip
Prep rooms and lab stores that handle liquids in bulk use a large funnel for refilling carboys and waste containers. LabEquip lists it with its chemistry lab equipment; ask about size through the contact page.
Related Products
- Carboy With Stop Cock, Plastic: A plastic carboy with stopcock that this funnel can fill from a bulk container before dispensing.
- Funnels -Long Stem, Plastic: A long stem plastic funnel for smaller transfers into narrow bottles and flasks.
- Powder Funnel, Plastic: A plastic powder funnel for pouring solids, which would clog a liquid funnel stem.
- Analytical Funnel, Plastic: A plastic analytical funnel with the cone shape needed for filtering through folded paper.
Frequently Asked Questions
What is an industrial plastic funnel used for in a laboratory?
It is used to transfer bulk volumes of liquid, such as distilled water, buffer or dilute stock solutions, into carboys, drums and large bottles. Its wide mouth catches the full stream from a large container, and its wide stem lets several litres pass quickly. The listing image shows a side handle and plain stem.
Why does liquid back up when filling a carboy through a funnel?
Air inside the carboy has to escape through the same neck that the funnel occupies. If the stem seals the neck, pressure builds and liquid backs up in the cone. Lift the funnel slightly or wedge a spacer beside the stem so air can escape, and pour at a steady rate rather than all at once.
Can an industrial funnel be used for filtration?
It is not designed for it. Filter funnels have a 60 degree cone that matches folded filter paper and a narrow stem, while an industrial funnel is sized for fast bulk flow. Use a filter funnel or Buchner funnel to remove solids, and the industrial funnel only to move clear liquids.
Should one industrial funnel be used for all liquids?
Keep separate, labelled funnels for different liquids, at least one for purified water and another for chemical solutions. A funnel that has carried acid or a buffer can contaminate distilled water even after rinsing. Colour tape on the handle is a simple way to keep them apart.
Which chemicals can safely go through a plastic industrial funnel?
Large funnels of this kind are commonly polypropylene or polyethylene, which resist water, salt solutions and dilute acids and alkalis. Check compatibility before pouring organic solvents or concentrated acids, and do not pour hot liquids, which can soften the plastic.
How should a large plastic funnel be cleaned and stored?
Rinse it at once after use, wash with mild detergent and a soft brush, then rinse with distilled water. Hang it by its handle to drain and dry, so dust does not collect in the cone and no water pools in the stem.
Last Updated: November 2026










Reviews
There are no reviews yet.