Quick Answer: This glassware support for electric burner use is an accessory named for the LAB Microbio electric burner. The listing photo shows two long metal rods and a small perforated plate with a bracket, which together hold a beaker, flask or dish steadily above the heat instead of in the hand.
Parts of the Glassware Support
Electric burners in microbiology labs are mostly used for loops and tube mouths, but they are also handy for warming a small vessel of liquid or drying a piece of glassware. Holding a vessel above the heat in tongs is tiring and risky. This support provides a perforated plate carried on two rods, so the vessel rests at a steady height over the LAB Microbio burner while both hands stay free.
The photo shows the parts laid out rather than assembled: two straight rods with a row of holes along their length, and a small square plate pierced with holes and bent into a bracket. The perforations let heat rise through the plate to the base of the vessel.
The support is named for the LAB Microbiology electric Bunsen burner, and fit on other burners in this range should not be assumed, because their housings differ. On the Hofmann burner, for example, the same job is done by its own burner guard with built-in vessel supports.
Specifications
| Item | Glassware support set for the LAB Microbio electric burner |
| Parts shown | Two metal rods and a perforated plate with bracket (photo) |
| Purpose | Holds small vessels at a set height above the heating zone |
| Suitable vessels | Small heat-resistant beakers, conical flasks and dishes |
Applications
- Warming a small beaker of water or staining solution during microbiology practicals
- Drying a rinsed small beaker or watch glass before reuse
- Heating a conical flask of liquid without holding it in tongs
- Demonstrations where the teacher needs both hands free to add reagents while a vessel heats
Care & Handling
- Assemble the support while the burner is cold, and check that the plate sits level before placing glassware on it.
- Use only heat-resistant glassware, and never stand plastic containers on the plate.
- The rods and plate become hot; lift vessels off with tongs or heat-resistant gloves.
- Clean the perforated plate when cool with a brush and detergent solution, drying it before storage to limit corrosion.
Why Choose LabEquip
Labs that already run the LAB Microbio burner and want hands-free heating of small vessels are the buyers of this support. LabEquip carries it in the chemistry lab equipment range; quote your burner model through the contact page so the support can be matched.
Related Products
- LAB Microbiology Electric Bunsen Burner: The LAB Microbiology electric Bunsen burner this support is named for and fits over.
- Electric Bunsen Burner LAB 2: The LAB 2 electric bench burner, a sister model with a front control knob and perforated guard.
- Bunsen Burner Support: A wire Bunsen burner support frame that holds gauze and a small vessel over a gas burner instead.
- Hofmann Electric Burner: The Hofmann electric burner, an upright model whose guard carries vessels directly on its prongs.
Frequently Asked Questions
What does the glassware support for an electric burner do?
It holds a small beaker, flask or dish at a steady height above the electric burner, so the vessel can be warmed without being held in tongs. The listing photo shows two long metal rods and a perforated plate with a bracket, which together carry the vessel over the heat.
Which electric burner is this glassware support made for?
It is named for the LAB Microbio electric burner. Fittings on electric burners differ in shape and size, so the support is meant for that model and should be fitted following the instructions supplied with the burner and support.
Which vessels can sit on the glassware support plate?
Small heat-resistant vessels such as borosilicate beakers, conical flasks and evaporating dishes suit it. Keep vessels small enough to sit fully on the plate without overhanging, and avoid plastic containers, which can melt in the rising heat.
Why is the support plate perforated?
The holes let heat rising from the burner pass through to the base of the vessel instead of being blocked by solid metal. They also let air move, so the plate heats less unevenly and drips do not pool on it.
Does the glassware support get hot during use?
Yes. The plate and rods sit in the heat above the burner and become hot enough to burn skin. Use tongs or heat-resistant gloves to remove vessels, and let the support cool fully before adjusting or removing it.
Can a liquid be boiled on the electric burner support?
Gentle warming of small volumes is its main purpose. Boiling is possible in a small heat-resistant vessel, but the liquid must not be filled too high, and anti-bumping granules help. Boiling over onto an electric burner can damage the heating unit, so watch the vessel closely.
Last Updated: November 2026










Reviews
There are no reviews yet.