Search

In Stock

Funnel, Plain 60 Degrees, Long Stem

Elongated Hydrostatic Stem: Features a precision-drawn long stem that facilitates a constant liquid column, creating a suction effect that significantly accelerates filtration rates compared to short-stem alternatives.

Geometrically Calibrated 60° Cone: Specifically molded to an exact 60-degree internal angle, ensuring a perfect seal with standard filter media to prevent bypass and maximize particulate retention.

₹240.00

Quick Answer: A long stem funnel is a plain 60 degree filter funnel whose stem is longer than usual. The stem fills with an unbroken column of filtrate, which draws liquid through the paper faster, and it reaches well down into narrow-necked flasks and bottles when pouring.

The Liquid Column That Speeds Filtration

In gravity filtration, the only force pushing liquid through the paper is the weight of the liquid above it. A long stem adds to that: when the stem fills completely with filtrate and no air bubble breaks the column, the hanging liquid pulls gently on the liquid in the paper, much like a siphon. The longer the unbroken column, the stronger the pull, so a well-sealed paper filters noticeably faster here than in a short-stemmed cone.

Getting the column to form depends on a good seal between paper and glass. The paper should be pressed against the cone with a wet finger or a stream of wash water, so that no air enters the stem from the top. The stem tip should touch the inside wall of the receiving vessel, letting the filtrate run quietly down the glass instead of splashing. That is why long stemmed funnels have traditionally been preferred in gravimetric analysis, where every drop of filtrate must be collected cleanly.

The same length helps when pouring into a narrow-necked flask or bottle, because the outlet sits below the neck. For hot saturated solutions, however, a long stem is a drawback: the solution cools on its way down and crystals block the tube, so the short stem funnel is the choice there.

Applications

  • Gravimetric analysis practicals in which a precipitate is filtered and washed quantitatively
  • Filtering large volumes of cool solution, such as water samples, where speed matters
  • Pouring liquids into volumetric flasks or bottles with narrow necks
  • Delivering liquid below the surface of another liquid, for example when layering solutions

Specifications

Cone angle 60 degrees, plain (smooth) wall
Stem Long, to hold a column of filtrate
Suited to Gravity filtration of cool liquids; pouring into narrow necks
Not for Hot saturated solutions, which crystallise in the stem

Care & Handling

  • Clean inside the stem with a narrow brush or pipe cleaner, since residues collect at the tip.
  • Store these funnels lying down or in a rack, because a long stem snaps easily if the funnel falls over.
  • Keep the stem tip against the wall of the receiver during filtration to prevent splashing and loss.
  • Rinse promptly after filtering salt solutions so crystals do not dry inside the narrow bore.

Why Choose LabEquip

Colleges teaching quantitative analysis and schools that filter large class volumes are the typical buyers of long stemmed funnels. They are available from LabEquip’s chemistry lab equipment section; send stem length and quantity requirements through the contact page.

Related Products

  • Funnel, Plain 60 Degrees, Short Stem: The short stem version, chosen for hot filtration where a long stem would cool the solution and block.
  • Funnels -Long Stem, Plastic: A plastic long stem funnel for transferring liquids into narrow vessels where glass breakage is a worry.
  • Funnel Stand, Wooden: A wooden funnel stand whose sliding arm sets the funnel at a height that suits the long stem.
  • Volumetric Flask: A volumetric flask that a long stem funnel can fill without drops running down the outside of the neck.

Frequently Asked Questions

Why does a long stem make gravity filtration faster?

When the stem fills completely with filtrate and no air bubble breaks the column, the weight of that hanging liquid pulls gently on the liquid in the paper, much like a siphon. The longer the unbroken column, the stronger the pull, so a well-sealed paper filters faster than in a short-stemmed cone.

How do I get the stem of a long stem funnel to fill with liquid?

Seal the paper cone firmly to the glass with a wet finger or a stream from a wash bottle, so no air enters from the top. Pour the first liquid steadily and, if needed, briefly close the stem tip with a finger until it fills. Once the column forms, keep the paper topped up so it does not break.

When should I use a long stem funnel instead of a short stem one?

Use the long stem for gravity filtration of cool liquids and for pouring into narrow-necked flasks and bottles, where its reach is an advantage. Switch to a short stem for hot saturated solutions, which cool and crystallise inside a long stem and block it.

Can a long stem funnel be used to fill a volumetric flask?

Yes. The long stem delivers liquid well below the neck, so no drops are lost on the outside of the flask. Rinse the funnel into the flask afterwards with distilled water so all the solute goes in, then remove the funnel before making up to the calibration mark.

Why should the funnel stem touch the side of the receiving beaker?

With the tip against the inner wall, the filtrate runs down the glass instead of dripping from a height. That stops splashing, keeps any precipitate in the filtrate from spraying out, and helps the liquid column in the stem stay unbroken.

How do I clean the narrow stem of a long stem funnel?

Rinse it straight after use before residues dry, running water through the cone and down the stem. A long, thin bottle brush or pipe cleaner can scrub inside the stem, followed by a rinse with distilled water. Let it drain hanging or upside down so no water sits in the stem.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)