Search

In Stock

Flask, Conical (Erlenmeyer)

Optimal Thermal Coefficient: Manufactured from 3.3 expansion borosilicate glass, capable of withstanding rapid temperature fluctuations and resisting corrosive acidic or alkaline reagents without hydrolytic leaching.

Reinforced Structural Integrity: Features a heavy-duty, fire-polished beaded rim and calibrated wall distribution, significantly increasing mechanical strength for safe handling during high-speed agitation or vacuum applications.

₹400.00

Quick Answer: An Erlenmeyer flask is a conical laboratory flask with a flat base, straight sloping sides and a narrow cylindrical neck. Named after the German chemist Emil Erlenmeyer, it is used for mixing by swirling, heating and holding solutions, recrystallisation and growing liquid cultures.

Why the Erlenmeyer Shape Has Lasted

Emil Erlenmeyer introduced the conical flask in the 1860s, and its geometry has changed little since. The wide base gives a large heating surface and a low centre of gravity, the sloping walls redirect a swirled liquid inwards, and the narrow neck limits evaporation and can be closed with a bung, a cotton-wool plug or foil. Together these make it the default container in chemistry and microbiology laboratories for tasks that combine mixing with a moderate amount of heat.

In recrystallisation, for example, a hot saturated solution cools more slowly and loses less solvent from this conical shape than from a beaker, and the crystals that form can then be collected by suction filtration. In microbiology the same shape carries broth cultures on a shaker platform, where the sloping walls keep the medium moving without spilling.

If a set of several sizes is wanted in one order, see the assorted conical flask set.

Specifications

Design Erlenmeyer pattern: flat base, conical body, narrow cylindrical neck
Closure options Rubber bung, cotton-wool plug, foil or screw cap, depending on neck finish
Typical use Swirl mixing, heating solutions, recrystallisation, liquid cultures
Graduations Approximate filling guide only, where present

Applications

  • Recrystallising crude organic solids such as benzoic acid or acetanilide from hot water or ethanol
  • Preparing and sterilising culture media, with the neck closed by a cotton-wool or foam plug
  • Growing bacterial or yeast cultures in liquid broth on a shaker
  • Collecting a filtrate or distillate where a narrow neck reduces evaporation
  • Titrations in college analytical chemistry practicals

Care & Handling

  • Heat the flask on a hot plate or over a gauze and swirl the liquid from time to time; never heat an empty flask.
  • When autoclaving, cover the neck with a loose plug or foil so steam can enter and pressure cannot build.
  • Clean the inside of the shoulder, where residues collect out of reach, with a curved flask brush.
  • Hold a hot flask by the neck with tongs or a heat-resistant glove, not bare fingers.

Why Choose LabEquip

College chemistry departments, microbiology labs and school preparation rooms get through conical flasks faster than most glassware because the flask serves so many tasks. They are stocked with LabEquip’s chemistry lab equipment; tell us the sizes, neck type and quantities on the contact page.

Related Products

Frequently Asked Questions

Is an Erlenmeyer flask the same as a conical flask?

Yes. Erlenmeyer flask and conical flask are two names for the same design: a flat base, straight sloping sides and a narrow cylindrical neck. The name honours the German chemist Emil Erlenmeyer, who introduced the shape in the 1860s; the design has changed very little since.

Why is an Erlenmeyer flask used for recrystallisation?

The sloping sides and narrow neck slow the evaporation of hot solvent and reduce the chance of the solution splashing as it is swirled. As the solution cools, crystals form on the base and lower walls, and the wide base gives them room. The neck can be loosely covered to keep dust out while the flask cools slowly.

Can an Erlenmeyer flask be heated on a hot plate?

A borosilicate Erlenmeyer flask can be heated on a hot plate if it is warmed gradually and never heated empty, and its wide flat base suits a hot plate well. Thinner or soda-lime flasks should only be warmed gently. Use a clamp or tongs to move a hot flask, since the narrow neck stays hot.

How is the neck of an Erlenmeyer flask closed for autoclaving media?

Plug the neck with non-absorbent cotton wool, or a foam bung, and cover it with a cap of aluminium foil. The plug lets steam reach the medium and lets air escape during autoclaving, while keeping microbes out afterwards. Never seal the flask tightly before autoclaving, as trapped air and steam can build pressure.

How full should an Erlenmeyer flask be for liquid cultures?

Fill it only to about a fifth of its capacity when growing aerobic cultures on a shaker. The large surface area of the shallow liquid lets oxygen dissolve as the flask is swirled. Overfilling reduces aeration and slows growth, and also increases the risk of the culture slopping onto the plug.

Can an ordinary Erlenmeyer flask be used under vacuum?

No. A standard Erlenmeyer flask has thin walls and a flat base, which can implode under reduced pressure. Vacuum filtration needs a heavy-walled filtering flask with a side arm, and evacuated distillation needs round bottom flasks. Use an ordinary conical flask only at atmospheric pressure.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)