Quick Answer: Ferrofluid is a liquid containing magnetic nanoparticles, usually iron oxide, coated with a surfactant and suspended in a carrier liquid. In a ferrofluid demonstration it is placed near a magnet, where it rises into spikes and follows the field, showing the shape of a magnetic field in three dimensions.
A Liquid That Responds to a Magnet
Each particle in ferrofluid is around ten nanometres across, far smaller than an iron filing, and a surfactant coating stops the particles clumping together. Random motion of the liquid keeps them suspended, so the fluid behaves as an ordinary liquid until a magnet comes near. Then every particle is pulled towards the stronger field, and the liquid as a whole moves and changes shape.
The most striking effect is the pattern of spikes that appears when a strong magnet is held underneath. Spikes form where the magnetic pull is balanced by the fluid’s surface tension and weight, and they line up along the field. Move the magnet and the spikes follow; take it away and the surface falls flat again, because the fluid is not permanently magnetised. A shallow glass Petri dish with the magnet held beneath it is a simple way to show this.
Ferrofluid therefore serves two lessons. In physics it makes magnetic fields visible in a way iron filings cannot, including in three dimensions. In chemistry it is an example of a colloid and of nanotechnology, where a surface coating decides whether particles stay dispersed. The same principle is used in some loudspeakers and rotary seals.
Applications
- Visualising the field around bar, horseshoe and disc magnets
- Explaining colloids, surfactants and nanoparticles in chemistry lessons
- Showing the difference between a permanently magnetised material and one that responds only while a field is present
- Open-day displays in a sealed cell or vial
Specifications
| Item | Ferrofluid (magnetic colloidal liquid) |
| Composition (general) | Magnetic nanoparticles, surfactant coating, carrier liquid |
| Behaviour | Attracted to magnets; forms spikes in strong fields |
| Uses | Magnetic field and colloid demonstrations |
Care & Handling
- Keep ferrofluid in a closed container or sealed display cell; it stains skin, clothing, benches and paper, and the marks are hard to remove.
- Never let a magnet touch the fluid directly; the fluid coats the magnet and is very hard to clean off, so hold the magnet under a dish or behind glass.
- Wear gloves and eye protection when transferring it, and read the safety data sheet for the carrier liquid.
- Store the container upright and sealed, away from heat, to limit evaporation of the carrier.
Why Choose LabEquip
Physics and chemistry teachers looking for a memorable way to show magnetic fields or colloids buy ferrofluid in small quantities. LabEquip lists it under chemistry lab equipment; ask about volumes and display containers through the contact page.
Related Products
- FINE IRON FILING: Fine iron filings that line up along a magnet’s field to show its pattern in two dimensions.
- Magnetic Lines of Force Tube: A sealed tube of suspended iron particles that shows a magnet’s field in three dimensions.
- Representation of magnetic 3D Field: A sealed cube of iron filings in clear liquid with a central tube for a bar magnet.
- Wireless Magnetic Field Sensor Redy: A wireless Hall-effect sensor for measuring the magnetic flux density that shapes the ferrofluid.
Frequently Asked Questions
What is ferrofluid made of?
Ferrofluid is a liquid containing magnetic nanoparticles, usually iron oxide, each about ten nanometres across. Every particle carries a coating of surfactant that stops it clumping with others, and the coated particles are suspended in a carrier liquid such as water or a light oil. Together they behave as a single liquid that responds to magnets.
Why does ferrofluid form spikes near a strong magnet?
In a strong field the magnetic particles are pulled towards the regions where the field is strongest, and the liquid surface rises in peaks along the field lines. Surface tension and gravity resist the pull, and the balance of these forces gives the regular pattern of spikes. Moving the magnet makes the spikes follow it.
Is ferrofluid a magnet itself?
No. Each particle is so small that it behaves as a tiny magnet whose direction keeps changing, so with no magnet nearby the particles point randomly and the fluid has no overall magnetism. A nearby magnet lines them up and the fluid is strongly attracted, but as soon as the magnet is taken away it becomes non-magnetic again.
How should ferrofluid be displayed safely in a classroom?
Keep it in a sealed clear bottle or vial, or in a small dish placed inside a sealed container, and move a magnet around the outside. Ferrofluid stains skin, clothes and surfaces and is hard to remove, so do not let magnets touch the liquid directly, wear gloves when handling an open sample, and keep it away from mouths and eyes.
Why don’t the particles in ferrofluid settle to the bottom?
The particles are so small that the constant random motion of the carrier liquid’s molecules keeps knocking them about, which stops them sinking under gravity. The surfactant coating stops them sticking together into bigger clumps that would sink. A ferrofluid is therefore a stable colloid rather than a suspension that settles.
Where is ferrofluid used outside the classroom?
Ferrofluids are used in some loudspeakers, where they sit in the gap around the voice coil to carry heat away and damp vibration, and as liquid seals around rotating shafts, held in place by magnets so that they keep out dust and gases. They were first developed in the 1960s in work on moving liquid fuels in space.
Last Updated: November 2026










Reviews
There are no reviews yet.