Quick Answer: Assorted conical flasks are a mixed selection of Erlenmeyer flasks of different capacities supplied under one listing. The flat base, conical body and narrow neck are the same across the range; what varies is the volume, so each size can be matched to a particular task.
Matching Flask Size to the Job
A laboratory rarely needs only one size of conical flask. Small flasks hold the aliquot in a titration, medium flasks carry solutions being warmed or mixed, and larger ones hold stock media or rinse water. Buying an assortment lets a new laboratory, a practical examination centre or a teacher’s demonstration kit cover these tasks without ordering each size separately.
A practical way to plan it is to list the experiments in the syllabus and note the volume each one uses; the flask chosen should normally be two to four times that working volume, which leaves space for swirling and prevents boil-over.
For repeat orders of a single capacity, the standard Erlenmeyer flask listing is usually the better route.
Applications
- Smaller flasks for pipetted aliquots in acid-base and redox titrations
- Mid-size flasks for dissolving solids, warming solutions and crystallisation
- Larger flasks for preparing stock solutions, culture media and wash water
- Stocking a teaching laboratory or a mobile science kit that must cover several practicals
Specifications
| Contents | Mixed capacities of Erlenmeyer (conical) flasks |
| Common design | Flat base, conical body, narrow neck |
| Selection guide | Choose a flask two to four times the working volume |
| Suited to | Stocking new labs, practical exam centres, teacher kits |
Care & Handling
- Shelve each size in its own marked section so small flasks are not crushed beneath larger ones and students return them to the right place.
- Inspect the whole assortment at the end of each term and replace chipped or cracked flasks individually rather than reordering the full set.
- Match bungs and foam plugs to each size before a practical, since neck diameters differ across the range.
- Heat any size gradually and keep boiling liquids below half of the flask’s capacity.
Why Choose LabEquip
Schools setting up a laboratory and colleges replacing breakage across several practicals find a mixed order simpler to manage than many single-size orders. LabEquip can make up the assortment from its chemistry lab equipment range to suit your syllabus; list the capacities and counts through the contact page.
Related Products
- Flask, Conical (Erlenmeyer): A single-size Erlenmeyer flask for topping up whichever capacity in the assortment gets used or broken most often.
- Conical Flask, Plastic: A plastic conical flask for younger classes or field work where a dropped glass flask is the main risk.
- Brush, Erlenmeyer (Conical)/ Round Bottom/ Flat Bottom Flask: A bendable flask brush that reaches past the narrow neck to clean the base and shoulder of each flask size.
- Rubber Corks, Assorted: Mixed rubber stoppers in several sizes, so flasks of different neck widths in the set can all be closed.
- Flask, Filtering: A heavy-walled side-arm flask for suction filtration, a job ordinary conical flasks must never be used for.
Frequently Asked Questions
Which conical flask sizes does a school chemistry lab use most?
Small and medium flasks do most of the work. A small flask holds the measured portion of solution in an acid-base titration, a medium one is used for warming, dissolving and swirling, and larger ones hold culture media, rinse water or stock solutions. An assorted set of Erlenmeyer flasks covers all of these jobs from a single listing.
How do I choose a conical flask size for a given volume of liquid?
Pick a flask about two to four times the volume of liquid it will hold. That leaves room to swirl the contents without splashing and stops a heated solution foaming over the neck. For example, liquid that half fills a small flask is better moved to the next size up when it has to be boiled.
Why buy an assortment of conical flasks instead of single sizes?
A mixed set lets a new laboratory, a practical exam centre or a teacher’s demonstration kit start with every common job covered, without ordering each capacity separately. Once the lab knows which sizes are used up fastest, those can be reordered on their own as single-size packs.
Can the graduation marks on a conical flask be used for measuring?
No. Any marks moulded or printed on an Erlenmeyer flask are an approximate filling guide only. Volumes that matter in a calculation should be measured with a pipette, burette, measuring cylinder or volumetric flask and then transferred into the conical flask.
How can I tell conical flask sizes apart quickly on a crowded shelf?
Store them by size in labelled rows, largest at the back, and check the capacity marked on the side of each flask. Coloured tape or a marker band on the neck of each size makes sorting after washing quicker, especially when students return a mix of flasks to one tray.
Why does a conical flask have a narrow neck and sloping sides?
The sloping sides let liquid be swirled vigorously without slopping out, and they catch splashes that would escape from a beaker. The narrow neck reduces evaporation and can be closed with a bung, a cotton-wool plug or foil. The flat base keeps the flask stable on the bench or a white tile.
Last Updated: November 2026









Reviews
There are no reviews yet.