Search

In Stock

Flask, Boiling, Two/Three Neck (Round/Flat Bottom)

Precision-Ground Interchangeable Joints: Features standardized taper joints (NS) that ensure airtight, leak-proof connectivity for modular laboratory assemblies, maintaining extreme vacuum stability during volatile solvent extraction and reflux procedures.

High-Stability Borosilicate 3.3: Fabricated from low-expansion borosilicate glass to provide exceptional thermal shock resistance and chemical inertness, preventing ion leaching and sample contamination during high-temperature exothermic reactions.

₹750.00

Quick Answer: A two neck or three neck flask is a boiling flask with extra side necks around its main neck, so several pieces of apparatus can be fitted at once, such as a condenser, a thermometer and a dropping funnel. This listing covers two-neck and three-neck versions with round or flat bottoms.

One Flask, Several Openings

A single-neck flask allows one fitting at a time: a condenser, a thermometer or an addition funnel. Many preparations need more. A reaction heated under reflux while a reagent is added dropwise and the temperature is watched needs three openings, and a three-neck flask provides them: a central neck, usually for the condenser or a stirrer, and two side necks for a dropping funnel, a thermometer or a gas inlet.

A two-neck flask is the simpler option when only two fittings are needed, such as a condenser plus a thermometer or a gas inlet. Side necks may be straight or angled away from the centre, and angled necks give more room between fittings.

Round bottomed versions are the usual choice for heating in a mantle and for reduced-pressure work, while flat bottomed versions stand on a bench or hot plate and suit gentle warming with magnetic stirring. Either way, every fitting in a multi-neck set-up should be clamped or clipped, because the extra weight makes the assembly top-heavy.

Applications

  • Reactions heated under reflux while a reagent is added dropwise
  • Preparations that need the temperature of the reaction mixture monitored throughout
  • Reactions under an inert gas, with the gas inlet and outlet on separate necks
  • Mechanically stirred reactions with the stirrer passing through the central neck

Specifications

Item Boiling flask with two or three necks
Bottom Round or flat, as listed
Necks Central neck plus one or two side necks
Typical fittings Condenser, dropping funnel, thermometer, stirrer guide, gas inlet

Care & Handling

  • Close any unused neck with a matching stopper so vapour cannot escape and dirt cannot enter.
  • Clamp the flask at the central neck and support heavy side fittings separately.
  • Make sure the thermometer bulb dips into the liquid if the reaction temperature, rather than the vapour temperature, is to be measured.
  • Clean each neck and joint surface individually; residues trapped where the necks meet the body are easy to miss.

Why Choose LabEquip

Organic synthesis courses and research laboratories use multi-neck flasks when a preparation needs more than one fitting. LabEquip lists them in the chemistry lab equipment range next to the single-neck short neck boiling flask; send the neck count, joint sizes and base shape you need through the contact page.

Related Products

Frequently Asked Questions

What is a three-neck flask used for?

A three-neck flask lets three pieces of apparatus be fitted at once. A typical organic preparation uses the central neck for a reflux condenser or stirrer and the side necks for a dropping funnel and a thermometer or gas inlet, so a reagent can be added slowly while the mixture is heated and its temperature watched.

When is a two-neck flask enough instead of three necks?

Choose two necks when only two fittings are needed, such as a condenser plus a thermometer, or a condenser plus a dropping funnel. A two-neck flask is simpler to set up and clamp. A third neck is worth having when you also need a gas inlet, a stirrer guide or a second addition funnel.

What normally goes in each neck of a multi-neck flask?

The central neck is usually the widest and takes the heaviest or most important fitting: a reflux condenser or an overhead stirrer. The side necks take a dropping funnel, a thermometer or temperature probe, or a gas inlet or outlet. Clamp the flask by the central neck and support heavy fittings separately.

Should a multi-neck flask have a round or a flat bottom?

This listing includes both. A round bottom suits heating mantles, vigorous boiling and any work under reduced pressure, because the spherical shape spreads heat and stress evenly. A flat bottom stands on the bench and suits magnetic stirring on a hot plate and set-ups at atmospheric pressure.

How do you add a reagent dropwise to a multi-neck flask?

Fit a dropping or pressure-equalising funnel to one side neck, put the condenser on the central neck and a thermometer on the other side neck. Open the funnel tap just enough for a steady drip, watching the temperature and the reaction, and slow down if it warms too quickly. A pressure-equalising funnel keeps the flow steady in a closed system.

What should be done with an unused neck of a multi-neck flask?

Close it with a stopper of the matching joint size so solvent vapour cannot escape and moist air cannot enter. Never leave a neck open while heating under reflux. If you need occasional access, for example to take samples, use a stopper that can be removed easily and replaced quickly.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)