Quick Answer: A flat bottom flask is a round-bodied glass boiling flask with a flattened base, so it stands upright on a bench, gauze or hot plate without a support ring. It is used for heating liquids, preparing solutions and generating gases in simple set-ups.
A Boiling Flask That Stands on Its Own
This flask combines the round body of a boiling flask with a base flattened enough to stand on. That makes it convenient in school laboratories: it can sit on a gauze over a tripod, on a bench mat while a bung is fitted, or on a hot plate, without the clamps and cork rings a round-based flask needs.
It is the generating flask in many classic gas preparations. Fitted with a two-hole bung carrying a thistle funnel and a delivery tube, it produces hydrogen from zinc and dilute sulfuric acid, or carbon dioxide from marble chips and dilute hydrochloric acid, with acid added through the funnel as needed. It is equally at home boiling water in heat experiments or dissolving solids with warming.
The flattened base is also its limitation. A flat glass surface is weaker under a pressure difference than a sphere and heats less evenly, so the flask should not be used under vacuum or for heating to dryness. For reduced-pressure distillation or long, strong heating, a round bottom flask is the right choice.
Applications
- Gas generation with a thistle funnel and delivery tube for hydrogen or carbon dioxide
- Heating water or solutions over a tripod and gauze
- Dissolving solids with gentle warming when preparing solutions
- Simple distillation demonstrations at atmospheric pressure, with the flask clamped at the neck
Specifications
| Item | Boiling flask with a flat base |
| Standing | Stands unsupported on a bench, gauze or hot plate |
| Heating | Over gauze or on a hot plate; avoid heating to dryness |
| Not suited to | Vacuum work or reduced-pressure distillation |
Care & Handling
- Always put the flask on a wire gauze when using a burner; a direct flame on the flat base causes hot spots and cracks.
- Clamp the neck as well when a bung, funnel and tubing are fitted, as the loaded flask can topple.
- Never connect this flask to a vacuum pump.
- Cool the flask gradually on a heat-resistant mat, not on a cold, wet bench.
Why Choose LabEquip
Schools set up flat-based flasks for gas preparations and heating practicals where a self-standing vessel keeps the apparatus simple. LabEquip lists it in the chemistry lab equipment range; send the capacities you need through the contact page.
Related Products
- Flask, Boiling, Round Bottom: A round bottom boiling flask for strong heating, distillation and work under reduced pressure.
- Tubes, Delivery: Bent glass delivery tubes that carry gas from a flat bottom generating flask to collection.
- Pneumatic Trough: A pneumatic trough for collecting the gas produced in the flask by displacement of water.
- Brush, Erlenmeyer (Conical)/ Round Bottom/ Flat Bottom Flask: A flask brush shaped to pass through a narrow neck and clean inside a flat or round bottom flask.
Frequently Asked Questions
What is a flat bottom boiling flask used for?
A flat bottom flask is a round-bodied glass boiling flask with a flattened base, so it stands upright on a bench, gauze or hot plate without a support ring. It is used for heating liquids, preparing solutions and as the generating flask in gas preparations, where it holds the reactants under a bung fitted with a funnel and delivery tube.
What is the difference between a flat bottom and a round bottom flask?
A flat bottom flask stands on its own, which is convenient for preparing gases, mixing and gentle heating. A round bottom flask needs a clamp, cork ring or heating mantle, but its spherical shape spreads heat and pressure stress evenly, so it is preferred for strong heating, distillation, reflux and any work under vacuum.
Why should a flat bottom flask not be used under vacuum?
The flattened base is the weakest part of the flask, because the stress from the pressure difference concentrates where the curved wall meets the flat bottom. Under vacuum it can implode and scatter glass. Use a round bottom flask, which carries the load evenly across its whole surface, for vacuum distillation or evacuated set-ups.
How is a flat bottom flask set up to prepare a gas?
Fit the flask with a two-hole rubber bung carrying a thistle funnel and a delivery tube. Place the solid reactant in the flask and add the acid through the thistle funnel, making sure its stem dips below the liquid so gas cannot escape back up it. The gas leaves through the delivery tube to a gas jar over water.
How full should a flat bottom flask be when boiling a liquid?
Fill it no more than about half full, so there is room for the liquid to boil without frothing into the neck or bung. Add anti-bumping granules before heating, and heat gradually over a gauze or on a hot plate so the base warms evenly rather than at one hot spot.
Can a flat bottom flask be heated on a hot plate?
Yes. Its flat base sits in full contact with the plate, which is one advantage of this shape. Start at a low setting and increase gradually, never put a cold flask on a very hot plate, and do not heat the flask empty or let the contents boil dry, since uneven heating of the base can crack the glass.
Last Updated: November 2026









Reviews
There are no reviews yet.