Quick Answer: An air condenser is a long, straight glass tube with no water jacket, fitted to a flask so that vapour from a high-boiling liquid condenses on walls cooled by the surrounding air. It is used for reflux and distillation of liquids that boil above roughly 150 °C.
When Air Is Cold Enough
The job of any condenser is to take heat out of a vapour until it turns back into liquid. Low-boiling liquids such as ethanol or propanone need flowing cold water for that, but a liquid that boils well above 150 °C condenses readily on a glass surface cooled only by room air. The air condenser exploits this. It is simply a long glass tube, standing above a flask for reflux or sloping down to a receiver for distillation.
There is also a safety reason to use one. When very hot vapour meets a water-cooled condenser, the steep temperature difference across the inner glass wall can crack it. For liquids such as aniline or nitrobenzene, which boil at roughly 180 to 210 °C, an air-cooled tube removes that risk, and no water supply or drain tubing is needed on the bench.
Air cooling is less effective per unit length than water-cooled designs, so it is not a substitute for a Liebig condenser with volatile liquids; the vapour of a low-boiling solvent would simply escape from the top.
Applications
- Distilling high-boiling liquids such as nitrobenzene in organic preparation practicals
- Refluxing high-boiling reaction mixtures where a water condenser could crack
- Bench set-ups without a water tap or drain, when the liquid boils high enough for air cooling
Care & Handling
- Clamp the condenser near its upper end as well as supporting the flask; a long unsupported tube strains the flask neck.
- Let the tube cool before handling, as its lower part can be hot enough to burn after a distillation.
- Rinse tarry residues from nitro compounds out with an organic solvent first, then wash with detergent and a long flexible brush.
- Store the tube flat on a padded shelf, since long glass tubes snap easily.
Specifications
| Item | Air-cooled condenser: plain glass tube without a water jacket |
| Cooling | Room air on the outer wall; no water connections |
| Suited liquids | High-boiling liquids, typically above about 150 °C |
| Set-up | Vertical for reflux, sloping for distillation |
Why Choose LabEquip
College organic chemistry laboratories keep air-cooled condensers for high-boiling distillations alongside water-cooled types. LabEquip supplies both in its chemistry lab equipment range; send the length and joint details you need via the contact page.
Related Products
- Condenser, Liebig (Sampling): A water-jacketed Liebig condenser for distilling lower-boiling liquids.
- Reflux Condenser: A finned air-cooled reflux condenser that needs no water supply.
- Condenser Clamp, Extension: A condenser clamp with extension rod for holding the tube on a stand.
- Reflux Assembly: A reflux assembly showing a flask with a vertical condenser for prolonged boiling.
Frequently Asked Questions
What is an air condenser?
An air condenser is a long, straight glass tube with no water jacket, fitted to a flask so that vapour from a high-boiling liquid condenses on walls cooled by the surrounding air. It is used for reflux and distillation of liquids boiling above roughly 150 C.
When should an air condenser be used instead of a water condenser?
Use it when the liquid boils high enough, above about 150 C, to condense on glass cooled by room air. For such liquids a water-cooled condenser can crack, because the hot vapour meets glass chilled by cold water.
Can an air condenser be used for low-boiling solvents such as ethanol?
No. Ethanol and similar solvents need flowing cold water to condense, and with an air condenser much of the vapour would escape. Use a Liebig or bulb condenser for them.
How is an air condenser set up for reflux or distillation?
For reflux, fit it vertically on the flask so condensed liquid runs back down. For distillation, slope it downwards from the still head to a receiver so the liquid drains away. Clamp it by the tube, not just at the joint.
What are the advantages of an air condenser?
It needs no water supply, tubing or drain, so it is simple, cheap and cannot flood the bench. A longer tube gives more cooling surface when more condensing is needed.
How is a plain air condenser different from a finned reflux condenser?
Both are cooled by room air. A plain air condenser is just a straight tube, while a finned design adds external fins that increase the surface in contact with air, improving cooling in a shorter length.
Last Updated: November 2026










Reviews
There are no reviews yet.