Search

In Stock

Burette, Automatic Zero

Integrated Automatic Overflow System: Precision-engineered with a specialized overflow tip and fire-fused jet that utilizes capillary action to align the liquid level instantly with the zero graduation, maximizing workflow efficiency in high-throughput environments.

High-Durability Borosilicate 3.3 Matrix: Fabricated with a low coefficient of linear expansion (3.3 x 10-6 K-1), ensuring the vessel maintains Class A/B volumetric tolerances even after repeated exposure to aggressive chemical reagents or thermal sterilization.

₹750.00

Quick Answer: An automatic zero burette is a titration burette that fills from an attached reservoir and sets its liquid level to the zero mark by itself, with excess liquid overflowing back. It removes the manual step of adjusting the meniscus to zero before each titration.

How the Zero Sets Itself

In the usual design, the automatic zero burette is mounted on top of a reservoir bottle holding the titrant. Squeezing a rubber hand bellows pushes titrant up through a filling tube until it rises past the zero mark; when the pressure is released, the liquid above zero drains back through an overflow tip, leaving the meniscus exactly at zero. The titration then proceeds through a stopcock at the lower end, as with an ordinary burette.

The arrangement saves the most time where one titrant is used many times in a session: routine alkalinity or hardness checks in a water laboratory, quality-control titrations in a factory laboratory, or a class running repeated trials. Keeping the titrant in a closed reservoir also protects it, and a soda-lime guard tube on the air inlet stops sodium hydroxide solution from absorbing carbon dioxide.

Specifications

Item Burette with automatic zero-setting overflow
Filling From a reservoir, usually by hand bellows
Zero setting Excess liquid drains back through an overflow tip
Delivery Stopcock at the lower end, as on a standard burette
Protective fitting Guard tube on the air inlet is common for carbon-dioxide-sensitive titrants

Care & Handling

  • Refill the reservoir only with the same standardised solution; mixing old and new batches changes the concentration.
  • Restandardise the titrant in the reservoir at regular intervals, because solutions drift over time.
  • Move the burette and reservoir as one assembly, supporting the reservoir from beneath.
  • Drain and rinse the whole system with distilled water before changing to a different titrant.

Applications

  • Repeated acid-base titrations with one standard solution through a whole practical session
  • Routine water-testing titrations such as total hardness or alkalinity
  • Quality-control titrations in which many samples are analysed with the same reagent
  • Storing and dispensing sodium hydroxide titrant protected from air

Why Choose LabEquip

Water-testing laboratories, college analytical labs and industrial QC rooms choose automatic zero burettes when they titrate many samples a day with one reagent. LabEquip lists it with conventional burettes such as the PTFE key burette in the chemistry lab equipment range; send your required capacity through the contact page.

Related Products

  • Automatic Pipette: An automatic pipette that uses a reservoir and overflow to dispense a fixed volume repeatedly.
  • Burette, PTFE Key: A PTFE key burette for standard titrations where the zero is set by hand.
  • Laboratory Burette Stand: A laboratory burette stand with base, rod and clamp to hold the burette upright.
  • Wash Bottle: A wash bottle for rinsing the burette tip and flask walls during titration.

Frequently Asked Questions

How does an automatic zero burette set itself to zero?

The burette is mounted on a reservoir of titrant. Squeezing the hand bellows pushes liquid up past the zero mark; when the pressure is released, the excess drains back through an overflow tip, leaving the meniscus exactly at zero.

What are the advantages of an automatic zero burette?

It removes the step of adjusting the meniscus to zero before every titration and keeps the titrant in a closed reservoir. In labs that run many titrations with the same reagent, this saves time and reduces reading errors at the start.

Why do some automatic burettes have a guard tube on the air inlet?

Titrants such as sodium hydroxide absorb carbon dioxide from the air, which changes their concentration. A guard tube filled with a carbon dioxide absorbent on the reservoir’s air inlet protects the solution during long-term storage.

Is the end reading still taken by eye on an automatic zero burette?

Yes. Only the zero is set automatically; at the end point you read the meniscus against the graduations in the usual way, with your eye level with the bottom of the meniscus to avoid parallax.

How should the reservoir of an automatic burette be refilled?

Empty and rinse the reservoir before changing to a new batch of titrant, then rinse it with a little of the new solution before filling. Mixing old and new solutions can change the concentration you standardised.

How do you clean an automatic zero burette?

Run out the titrant, rinse the reservoir, filling tube and burette with distilled water several times, and leave the stopcock open to drain. Check that the overflow tip is clear, since a blocked tip stops the zero from setting correctly.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)