Quick Answer: An automatic pipette, in glassware terms, is a self-zeroing pipette that fills from a reservoir and sets its own volume by overflow, so the same measured quantity of liquid can be dispensed again and again without adjusting the meniscus by eye. It is used for repetitive dispensing of one reagent.
Repeat Dispensing Without Reading a Mark
Measuring the same volume many times with an ordinary pipette means drawing liquid above the mark and letting it down to the mark by eye, every time. The automatic pipette removes that step. In the usual glass design it is connected to a reservoir of reagent; liquid is raised until it overflows at the top of the measuring chamber, the excess runs off, and the chamber then holds exactly its set volume, which is delivered by turning a stopcock.
That makes the self-zeroing design useful where one reagent goes into many samples: dispensing acid in routine milk-fat tests, adding a fixed volume of buffer or indicator to a series of titration flasks, or preparing a set of identical reaction mixtures for a class rates practical. The reagent stays in its reservoir between measurements, which keeps it clean and limits exposure to fumes.
The same name is also used loosely for adjustable piston micropipettes, which are quite different instruments.
Specifications
| Item | Self-zeroing (automatic) pipette for repeat dispensing |
| Volume setting | Overflow to a fixed level; no manual meniscus adjustment |
| Supply | From an attached reservoir, in the usual glass design |
| Delivery | Controlled by a stopcock |
Applications
- Adding the same volume of acid or reagent to a long series of samples in routine testing
- Dispensing indicator or buffer into several titration flasks in turn
- Preparing identical reaction mixtures for a class rates-of-reaction practical
- Dairy and food testing laboratories where one reagent is dispensed many times a day
Care & Handling
- Keep the reservoir closed and labelled, and refill it only with the same reagent.
- Check the overflow outlet is clear before each session; a blocked overflow stops the pipette setting its volume.
- Flush the pipette and reservoir with distilled water when changing reagents.
- Stand the reservoir on a stable base and never lift the assembly by the pipette.
Why Choose LabEquip
Food, dairy and water testing laboratories and busy teaching labs use automatic pipettes where the same volume is measured dozens of times. LabEquip lists this pipette in its chemistry lab equipment range with the bulb type pipette for single accurate volumes; confirm the type and volume you need through the contact page.
Related Products
- Burette, Automatic Zero: An automatic zero burette that uses the same reservoir-and-overflow idea to set its zero for titrations.
- Pipette, Bulb Type (Clear Glass): A clear glass bulb pipette for single, accurate transfers of one fixed volume.
- Pipette, Graduated: A graduated pipette for measuring out variable volumes between marks.
- Pipette Stand (Vertical): A vertical pipette stand for draining and storing pipettes between uses.
Frequently Asked Questions
What is an automatic pipette in laboratory glassware?
It is a self-zeroing pipette that fills from a reservoir and sets its own volume by overflow, so the same quantity of liquid can be measured out again and again without adjusting a meniscus by eye. It is used for repeated dispensing of one reagent.
How does a self-zeroing pipette set its volume?
Liquid is raised from the reservoir until it overflows at the top of the measuring chamber, and the excess runs back. The chamber is then exactly full, and opening the stopcock delivers that fixed volume. The volume never depends on a reading by eye.
When is an automatic pipette better than a bulb pipette?
When the same reagent must be added many times, such as in a batch of identical tests, the automatic pipette is faster and more consistent. For a single accurate transfer of a sample, a bulb (volumetric) pipette is the usual choice.
How do you clean an automatic pipette and its reservoir?
Empty the reservoir, rinse the reservoir and measuring chamber several times with distilled water, then with the new reagent before refilling. Clean the stopcock and check it turns freely. Never leave reagents that crystallise or etch glass standing in it.
Can one automatic pipette be used for several reagents?
It is best kept for one reagent, because the reservoir and chamber would need thorough rinsing between liquids. Labelling the pipette with its reagent avoids cross-contamination in a busy laboratory.
How is an automatic pipette different from an automatic zero burette?
Both use a reservoir and an overflow to set the level. The automatic pipette always delivers one fixed volume, while the automatic zero burette sets only the starting point at zero and then delivers whatever volume the titration needs.
Last Updated: November 2026









Reviews
There are no reviews yet.