Quick Answer: This powered USB 3.0 hub adds four USB ports to a computer and draws its power from its own external supply rather than from the computer. In a science lab it lets one laptop or desktop run several USB sensors, interfaces or data loggers at the same time.
Why a Science Lab Needs a Powered Hub
Digital sensors for temperature, pH, conductivity, motion or light increasingly connect by USB, and a class practical may need three or four of them on one computer. Laptops often have only two ports, and each port can supply only a limited current. An unpowered hub shares that small supply between every device plugged into it, which is where dropped connections and missing data points usually start.
A hub with an external power supply avoids the problem. The supply plugs into the mains and feeds the four ports directly, while the single cable to the computer carries the data. USB 3.0 ports are also backward compatible, so older USB 2.0 sensors and interfaces work in them at their own, slower speed.
In practice the hub sits on the bench with the sensors, and only one cable runs to the computer. That keeps crowded benches tidy and means a laptop can be disconnected from the whole setup in one move at the end of a lesson. Devices that take power through their own Micro USB socket, rather than from the hub, can be run from the separate Micro USB power supply.
Applications
- Running several USB sensors on one computer during a titration or rate-of-reaction practical
- Connecting a data-logger interface, a USB camera and a mouse to a single classroom laptop
- Powering small USB devices from the mains rather than from a laptop battery
- A teacher’s demonstration station where the computer also drives a projector
Specifications
| Item | USB hub with external power supply |
| Ports | 4 x USB 3.0, as titled |
| Power | External power supply, as titled |
| Compatibility | USB 3.0; older USB 2.0 devices generally work at their own speed |
Care & Handling
- Place the hub away from sinks, wash bottles and solution trays, as it is not protected against liquids.
- Plug in the external supply before connecting high-draw devices, so they are not running from the computer alone.
- Use the power supply that belongs to the hub rather than a substitute adapter with a different rating.
- Unplug it before wiping the case with a dry cloth, and never spray cleaning fluid near the ports.
Why Choose LabEquip
Science departments moving to sensor-based practicals, and colleges running data-logging labs, buy powered hubs so that each bench works from one computer. LabEquip lists this hub under chemistry lab equipment; ask about quantities per lab through the contact page.
Related Products
- USB Hub 4 ports USB 2.0: A 4-port USB 2.0 hub for keyboards, mice and flash drives where faster ports and extra power are not needed.
- Micro USB Power Supply: A Micro USB mains power supply for charging sensors and loggers that have a Micro USB power socket.
- USB Microscope: A USB microscope that can share the hub with data-logging sensors on one classroom computer.
- Thin Micro USB Cable: A thin USB-A to Micro-B cable for connecting Micro USB devices to the hub’s ports.
Frequently Asked Questions
What is the difference between a powered and an unpowered USB hub?
An unpowered hub shares the limited current from one computer port among every device plugged into it. A powered hub like this one has its own external supply, so each of its four USB 3.0 ports can feed a device properly while the single cable to the computer carries only data.
Why do USB sensors disconnect from a laptop without a powered hub?
Each laptop port can supply only a limited current, and an unpowered hub splits that between several devices. Sensors, interfaces and data loggers that draw more than their share drop out, reset or lose data points. A hub with its own power supply gives every device the current it needs.
Will older USB 2.0 sensors work in a USB 3.0 hub?
Yes. USB 3.0 ports are backward compatible, so USB 2.0 sensors, interfaces and flash drives plug in and work at their own, slower USB 2.0 speed. The faster USB 3.0 rate is only reached when both the device and the computer port support it.
Can a USB 3.0 hub be used on a computer with only USB 2.0 ports?
It will work, but every device on the hub then shares USB 2.0 speed through that one connection. For sensors and data loggers, which send small amounts of data, this rarely matters; the external power supply still solves the current problem.
Does a powered USB hub need drivers?
Hubs of this kind normally use the standard USB hub support built into current Windows, macOS, Linux and ChromeOS, so no separate driver is needed for the hub itself. Each sensor or interface plugged into it still needs its own software, as it would when plugged straight into the computer.
How many sensors can be run through one 4-port USB hub?
This hub provides four USB 3.0 ports, so up to four sensors, interfaces or other USB devices can run at once from one computer port. Arrange them so the cables do not cross the working area, and keep the hub and its power supply away from liquids on the bench.
Last Updated: November 2026









Reviews
There are no reviews yet.