Search

In Stock

L Shaped Spreader 2

Ergonomic Static-Free Design: Features a smooth, rounded L-shaped footprint with a specialized upward-curved end to prevent surface tension disruptions and ensure 100% specimen contact without snagging.

Medical-Grade Polymer Construction: Manufactured from high-impact, gamma-sterilized polypropylene, ensuring a residue-free surface that maintains biological neutrality and prevents cross-contamination during sensitive serial dilutions.

$2.82

Quick Answer: The L Shaped Spreader is a bent rod with a short straight foot, used to spread a small volume of liquid culture evenly over the surface of an agar plate. It is the usual tool for the spread plate method in microbiology.

The Spread Plate Method

In the spread plate method, a small measured drop of a diluted sample, commonly 0.1 mL, is placed in the centre of a dried agar plate and spread over the whole surface with a sterile L-shaped spreader. The foot of the L lies flat on the agar, so pressure is even and the liquid is drawn into a thin film instead of pooling. Rotating the plate while moving the spreader back and forth, by hand or on a turntable, covers the surface evenly. After the liquid is absorbed the plate is inverted and incubated, and each viable cell or clump grows into a separate colony.

Because colonies grow across the surface rather than inside the agar, spread plates are used for counting viable bacteria, for isolating pure colonies and for organisms that need air or are sensitive to the heat of the molten agar used in pour plates. Plates carrying a manageable number of colonies, conventionally between about 30 and 300, are counted and multiplied back through the dilution factor.

Glass and metal spreaders are reused after sterilising, usually by dipping in alcohol and flaming; pre-sterilised plastic spreaders are used once and discarded. Knowing the material decides how students will sterilise it. Spread plates are normally poured in dishes such as the borosilicate glass Petri dish.

Where the Spreader Is Used

  • Viable counts of bacteria in water, milk and food samples in microbiology practicals
  • Plating transformed E. coli onto selective agar in molecular biology classes
  • Isolating separate colonies from mixed cultures
  • Spreading reagents such as X-gal over agar before plating

Safe Use and Care

  • When flaming a glass or metal spreader, dip only the foot in alcohol, pass it briefly through the flame and let the alcohol burn off away from the alcohol beaker.
  • Let the spreader cool for a few seconds or touch it to the agar edge first, since a hot spreader kills cells and melts the surface.
  • Keep the alcohol beaker covered and away from the burner flame to prevent fires.
  • Decontaminate used spreaders in disinfectant or by autoclaving before washing, and discard plastic ones as biohazard waste.

Specifications

Item L-shaped spreader for agar plates
Form Rod bent to a right angle with a flat spreading foot
Main method Spread plate technique for colony counts and isolation
Sterilisation (by material) Glass or metal: alcohol dip and flaming; plastic: single use

Why Choose LabEquip

Microbiology and biotechnology labs in colleges and universities use spreaders daily, so they are usually ordered in sets for each practical bench. LabEquip lists this spreader in Biology Lab Products; state the material and quantity you need through the contact page.

Related Products

Frequently Asked Questions

How is an L-shaped spreader used in the spread plate method?

Pipette a small measured volume of diluted sample onto the centre of a dry agar plate. Lay the sterile foot of the spreader flat on the agar and move it back and forth while turning the plate, until the liquid has soaked in evenly. Incubate the plate upside down and count the separate colonies that grow.

How do you sterilise a glass spreader with alcohol safely?

Dip the foot in ethanol, let the excess drip off, then pass it briefly through a flame so the alcohol burns off, holding the spreader pointing down and away from the beaker. Never return a burning spreader to the alcohol, and keep the beaker covered and well away from the flame to avoid a fire.

Why must the spreader cool before it touches the agar?

A hot spreader kills the cells it touches and can melt or score the agar surface. After flaming, let it cool in the air for a few seconds, or touch it on a part of the agar away from the sample first, before spreading.

Is an L-shaped spreader the same as a hockey-stick spreader?

Yes, they are two names for the same bent-rod design with a straight foot that lies flat on the agar. Other shapes do the same job, such as triangle and T-shaped spreaders, and some labs shake sterile glass beads over the plate instead of using a spreader.

How many colonies make a spread plate countable?

Plates with roughly 30 to 300 colonies are usually counted; fewer gives a poor estimate and more makes colonies merge. Multiply the count by the dilution factor and divide by the volume spread to find colony-forming units per millilitre of the original sample.

What is the difference between a spread plate and a streak plate?

A spread plate spreads a measured volume evenly over the whole surface, so colonies can be counted to estimate how many cells were in the sample. A streak plate thins cells out along lines drawn with a loop to get separate colonies for a pure culture, but it does not give a count.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)