Search

In Stock

Inoculating Loops, Plastic

₹530.00

Quick Answer: Plastic inoculating loops are single-use microbiology tools moulded in one piece, with a small ring at the tip of a plastic stem. They are used to streak agar plates, pick colonies and transfer cultures, and are discarded after use instead of being flamed.

Working Without a Flame

The reason most laboratories switch to plastic inoculating loops is the flame. A metal loop must be heated to red heat between every transfer, which needs a gas supply or spirit lamp and a student who has learnt to do it safely. A moulded plastic loop is used once and dropped into disinfectant, so there is no open flame on the bench and no risk of culture spattering from a hot wire. That makes plastic loops popular in schools without gas taps, in rooms shared with other subjects and in any session where many students work at once.

The listing photograph shows loops in blue and in clear or white plastic. In many ranges the stem colour indicates the loop volume, for example separating a smaller calibrated loop from a larger one, and some loops carry a needle at the opposite end.

Sterility matters more with plastic than with metal. A wire loop is sterilised by the user at the bench; a plastic loop is only as sterile as its packaging. Loops from an opened pack must be kept closed between uses, and the tip should never touch the bench or fingers before it reaches the culture.

Handling and Disposal

  • Take each loop out by the handle end and reclose the pack at once so the remaining tips stay clean.
  • After use, place the loop straight into a disinfectant pot or an autoclavable waste bag; never lay a used loop on the bench.
  • Treat used loops as contaminated waste and follow your institution’s rules for sterilising or disposing of microbiological waste.

Applications

  • Streak-plate practicals in rooms without a gas supply
  • Picking a single colony into broth or onto a fresh plate for a pure culture
  • Moving a measured loopful of sample onto agar when a calibrated loop is used
  • Large classes where many students inoculate plates at the same time

Specifications

Item Single-use inoculating loop, moulded plastic
Working end Small ring at the tip of the stem
Colours shown Blue and clear or white stems in the listing photograph
Heat Not for flaming; plastic melts in a flame

Why Choose LabEquip

Schools and colleges that have moved to flame-free microbiology usually reorder plastic loops each term. LabEquip lists them with the reusable metal inoculating loops and the flexible-tip Soft Loop Sterile, so a department can choose per practical. Send your class sizes through the LabEquip contact page to confirm volumes and packing.

Related Products

  • Inoculating Loops, Metal: Reusable metal wire loops that are sterilised in a flame, for teaching the full aseptic routine.
  • Soft Loop Sterile: A sterile, soft-tipped plastic loop, another disposable option for flame-free culture work.
  • Petri Dish (Culture), Plastic: Plastic Petri dishes with loose lids for pouring or holding the agar plates streaked with these loops.
  • Autoclavable Disposal Bags: Autoclavable disposal bags for collecting used loops and plates before steam sterilisation.
  • Agar Plates 10 PCA: Ready-poured plate count agar plates to streak with the loops.

Frequently Asked Questions

Can plastic inoculating loops be reused?

No, plastic loops are made for a single use. After touching a culture they should go straight into disinfectant or an autoclave bag. Washing and re-sterilising them is not reliable, and heat that would sterilise them distorts the plastic, so the loop no longer holds liquid properly.

How do you streak a plate for single colonies with a plastic loop?

Spread the loaded loop over one small area of the agar, then turn the plate and drag a fresh, unused loop or the unused side of the ring from the end of the first streak into a new area. Repeat for a third and fourth section. Each step thins the cells so single colonies grow in the last section.

What happens if a plastic loop is held in a Bunsen flame?

The plastic softens, melts and can drip or catch fire, and any culture on it may spatter. Plastic loops are designed to be used without a flame, so keep them well away from Bunsen burners and spirit lamps and use a metal wire loop for any procedure that requires flaming.

How should used plastic loops be disposed of?

Drop used loops into a container of suitable disinfectant or into an autoclavable bag kept on the bench. The bag is then autoclaved before it goes out as waste. Used loops should never go into an ordinary bin, because live cultures would remain on them.

What is a calibrated inoculating loop?

A calibrated loop is made to pick up a fixed volume of liquid, commonly 1 or 10 microlitres. It is used where the number of colonies has to be related to a volume, such as counting bacteria in a urine sample. Plastic calibrated loops are often colour-coded by the volume they carry.

Why do some schools prefer plastic loops to metal wire loops?

Plastic loops need no flame, so there is no risk of burns or of culture spitting from a hot wire, and students do not have to master flaming before they start. They are quick to hand out and collect. The trade-off is more plastic waste and the need to keep a supply in stock.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)