Quick Answer: Glass coverslips are very thin squares or circles of glass placed on top of a mounted specimen. They flatten the mount, keep liquid off the objective lens and give the even glass thickness that microscope objectives are designed to look through.
Why Coverslip Thickness Matters
A coverslip is part of the optical path, not only a lid. The high-power objectives on most biological microscopes are designed for a cover glass about 0.17 mm thick, and many are engraved with that figure. Coverslips of the right thickness give the sharpest image at 40x and above; noticeably thicker ones can blur fine detail, and very thick glass may stop a short-working-distance objective from focusing at all.
For that reason coverslips are sold in thickness grades. The common No. 1 grade is slightly thinner and suits general class work, while No. 1.5, centred close to 0.17 mm, is preferred for high-magnification and photographic work.
In routine practicals the coverslip does three practical jobs: it spreads the liquid of a wet mount into a uniform film, so the entire field of view focuses at once; it slows evaporation; and it stops stain and water reaching the front lens of the objective. For buyers who need a particular format, LabEquip also lists micro cover glasses in square, circular and rectangular shapes.
Specifications
| Item | Glass cover glasses (coverslips) for microscope slides |
| Packing (from product photo) | Square coverslips in a clear plastic box |
| Function | Flattens mounts, prevents drying, protects the objective lens |
| Optical note | High-power objectives are commonly corrected for about 0.17 mm cover glass |
Where Coverslips Are Used
- Covering wet mounts of onion peel, cheek cells, pond water and algae
- Permanent slides mounted in Canada balsam or DPX
- Hanging-drop preparations on concavity slides
- Squash preparations of root tips for mitosis
Handling Thin Glass
- Pick up glass coverslips by the edges with fine forceps or a moistened fingertip; they crack if bent.
- Keep the box closed so coverslips stay dust-free and do not stick together in humid air.
- Clean before use, if needed, by dipping in alcohol and drying on lint-free tissue.
- Dispose of broken coverslips in a glass or sharps container; the fragments are hard to see and cut easily.
Why Choose LabEquip
Coverslips are ordered alongside slides by every school, college and pathology lab that mounts specimens, often in large quantities per term. LabEquip supplies them through its biology lab products range; send the size and thickness you need through the contact page.
Related Products
- Microscope Slides, Glass, Plain: Plain glass slides for wet mounts and smears, the base that the coverslips sit on.
- Concavity Slides, Glass, Thick: Thick slides with a cavity for hanging drops and living organisms, covered with a coverslip.
- Canada Balsam Bottle: Holds the resin mountant used to seal coverslips onto permanent slides.
- Slide Holding Forceps: Spring-tension forceps that hold a slide by one end while it is stained and rinsed.
Frequently Asked Questions
Which coverslip thickness should I use for a microscope?
High-power objectives on most biological microscopes are designed for a cover glass about 0.17 mm thick. No. 1.5 coverslips are centred close to this and suit high-power work; the slightly thinner No. 1 grade is common for general class work.
How do you put a coverslip on without trapping air bubbles?
Touch one edge of the coverslip to the slide beside the drop, held at an angle of about 45 degrees, let the liquid spread along that edge, then lower it slowly with a mounted needle. Bubbles form when the coverslip is dropped flat onto the drop.
Why is a coverslip needed on a microscope slide?
A coverslip flattens the specimen into an even layer, slows drying, keeps liquid off the objective lens and gives the glass thickness that objectives are corrected for. Without one, high-power images blur and the lens can be contaminated.
Can glass coverslips be reused?
They can be washed in detergent, rinsed and dried, but they are thin and break easily, so many labs treat them as consumables. Coverslips from microbiology preparations must be disinfected first, and broken ones go into a glass waste container.
Why do coverslips stick together in the box?
Thin, flat glass clings by static and by thin films of moisture. Slide one sideways off the stack rather than lifting it, or pick it up by the edge with fine forceps; breathing on the stack makes them stick more.
What is the difference between square and round coverslips?
Square coverslips are the usual choice for slide mounts in class. Round ones fit into the wells of culture plates for growing cells on glass and suit circular mounts. The product photo shows square coverslips packed in a clear plastic box.
Last Updated: November 2026










Reviews
There are no reviews yet.