Search

In Stock

Canada Balsam Bottle

Hermetic Ground-Glass Interface: Engineered with a precision-ground neck and an integrated, tapered glass dropper to ensure a vapor-tight seal, effectively preventing the rapid polymerization and solvent loss associated with volatile mounting agents.

Refined Structural Geometry: Fabricated from heavy-walled, high-clarity glass with an overlapping protective cap and a wide, stable base to shield reagents from environmental particulates while maintaining structural durability during high-frequency laboratory use.

₹130.00

Quick Answer: The Canada Balsam Bottle is a small glass bottle for storing Canada balsam, the resin mountant used to seal coverslips on permanent microscope slides. A Canada balsam bottle keeps the balsam free of dust and slows the loss of solvent, so it stays at a usable thickness.

Canada Balsam and Permanent Slides

Canada balsam is a natural resin from the balsam fir, dissolved in xylene for use as a mounting medium. Its refractive index is close to that of glass, so stained tissue mounted in it looks clear under the microscope. In the classic method, a stained section is dehydrated through increasing strengths of alcohol, cleared in xylene, and a drop of balsam is placed on it before the coverslip is lowered at an angle to push out air. As the solvent evaporates the balsam hardens, sealing the slide for years.

Balsam’s weakness is how easily it thickens. Left open, the solvent evaporates and the resin turns stiff and stringy, and any dust that falls in ends up on slides. A dedicated bottle solves both problems. Balsam bottles are commonly made with a cover or cap over the neck, and many carry a glass rod through the stopper so a drop can be lifted out and applied directly.

Synthetic mountants such as DPX have replaced balsam in many labs because they yellow less, but the same kind of bottle suits them. Finished slides can be compared with those in the prepared slides range; sections are often stained in a Coplin jar before mounting.

Using and Cleaning the Bottle

  • Keep the Canada balsam bottle closed between uses so the solvent does not evaporate and dust stays out.
  • If the balsam becomes too thick, thin it with a little xylene in a fume hood rather than warming it over a flame.
  • Wipe the rod and neck with a xylene-dampened tissue before closing, so the stopper does not stick.
  • Work with xylene-based mountants in a ventilated area, wearing gloves, and keep them away from flames.

Specifications

Item Bottle for Canada balsam or other resin mountants
Purpose Dust-free storage and application of mounting medium
Common design features Cap over the neck; glass rod for applying drops
Used in Permanent slide preparation in histology and botany

Applications

  • Mounting stained plant and animal sections as permanent slides in college practicals
  • Making whole mounts of small organisms and insect parts
  • Holding DPX or other synthetic mountants at the slide-making bench
  • Mounting thin sections of rocks and minerals in geology labs

Why Choose LabEquip

Botany, zoology and histology departments that still prepare their own permanent slides need a dedicated bottle at the mounting bench. LabEquip lists it in Biology Lab Products; ask about the design and size through the contact page.

Related Products

  • Glass Coverslips: Thin glass cover glasses that are sealed onto slides with a drop of mountant to make permanent preparations.
  • Microscope Slides, Glass, Plain: Plain glass slides with no cavity or frosted end, suited to stained smears and permanent mounts.
  • Slide Tray: Holds freshly mounted slides flat and level while a resin mountant such as balsam hardens.
  • Staining Jar Rectangular: A lidded glass staining jar unaffected by xylene and alcohols, for dehydrating and clearing a batch of slides before mounting.

Frequently Asked Questions

What is a Canada balsam bottle used for?

It stores Canada balsam, the resin mountant used to seal coverslips onto permanent microscope slides, and keeps it free of dust. Bottles of this type usually have a cap over the neck and a glass rod for lifting single drops, so balsam is applied without pouring and the stock is exposed to air as little as possible.

How do I mount a coverslip with Canada balsam?

After the stained section has been dehydrated through alcohols and cleared in xylene, place one drop of balsam on it with the rod. Touch one edge of the coverslip to the slide and lower it slowly at an angle so the balsam spreads and pushes the air out, then leave the slide lying flat while the solvent evaporates and the balsam hardens.

Why has my Canada balsam become too thick, and how can it be thinned?

Balsam thickens as its solvent evaporates, which happens each time the bottle is left open. Small amounts of xylene, the usual solvent, stirred in gently and left to settle, bring it back to a flowing consistency. Keeping the cap on between drops is the simplest way to prevent thickening.

Why do bubbles form under the coverslip when mounting in balsam?

Bubbles usually come from lowering the coverslip flat instead of at an angle, from using too little balsam, or from balsam too thick to flow. Water left in a poorly dehydrated section can also make the mount cloudy. Use a full drop of balsam of the right consistency and lower the coverslip from one edge.

Can a balsam bottle also hold DPX or other synthetic mountants?

Yes, the bottle suits other resin mountants such as DPX, but keep one bottle per mountant and label it clearly, because mixing them can cloud the mount. Synthetic mountants are now common because they yellow less with age, while balsam remains in use for teaching and traditional preparations.

How do I clean a Canada balsam bottle and its glass rod?

Wipe the rod and the neck of the bottle with a tissue moistened with xylene, in a fume cupboard or well-ventilated room, before balsam hardens there; hardened resin at the neck can glue the cap shut. To clean an empty bottle fully, dissolve the residue with xylene, then wash with detergent and water.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)