Search

In Stock

Concavity Slides, Glass, Thick

$4.91

Quick Answer: Concavity slides are thick glass microscope slides with a shallow hollow ground into the upper surface. The cavity holds a drop of liquid or a small living specimen without crushing it, which suits hanging-drop preparations and observation of live organisms.

Why the Slide Is Thick and Hollowed

A normal wet mount squeezes the specimen between a flat slide and a coverslip. That is fine for thin tissues but not for a water flea, a rotifer or a swimming protozoan, which need room to move. A concavity slide solves this with a depression, usually round, ground into the glass; the extra thickness of the slide is what allows a hollow of useful depth while leaving enough glass beneath it for strength.

The product photo shows plain slides each with a single round cavity near the centre. Some concavity designs have two or three hollows; the number of cavities, their depth and the slide dimensions of this listing are not stated, so check them if the slides must fit a particular procedure.

The classic use is the hanging drop. A drop of culture is placed on a coverslip, the coverslip is inverted over the cavity and sealed at the edges, and the drop hangs in the hollow. Bacteria in the drop can then be watched swimming, which shows whether a species is motile without the distortion of a flattened mount.

Observations Suited to Cavity Slides

  • Hanging-drop preparations to test bacterial motility
  • Watching Daphnia, Cyclops, rotifers and protozoa alive
  • Observing mosquito larvae or small insect stages without crushing
  • Holding small seeds, pollen or crystals in a drop of liquid
  • Timed observations of pollen germination in sucrose solution

Specifications

Item Glass microscope slides with a concave cavity
Glass Thick, as stated in the product name
Cavity (from product photo) Single round depression near the centre of each slide
Suitable for Hanging drops, live aquatic organisms, small whole specimens

Cleaning and Handling

  • Clean the cavity with a cotton bud and warm detergent solution, then rinse; a cloth alone does not reach the bottom of the hollow.
  • Remove petroleum jelly seals with tissue before washing, or the grease spreads across the slide.
  • Disinfect slides used with bacterial cultures before cleaning.
  • Store them flat or in a box with wide slots; thick slides may not fit standard slide racks.

Why Choose LabEquip

Microbiology instructors and biology teachers keep a set of concavity slides for any practical involving live, swimming organisms. LabEquip supplies them with its biology lab products, alongside plain glass slides and glass coverslips for routine mounts.

Related Products

Frequently Asked Questions

What is a concavity slide used for?

A concavity slide has a shallow round hollow ground into its upper surface, which holds a drop of liquid or a small living specimen without crushing it under the coverslip. It is used for hanging-drop preparations and for watching live organisms such as water fleas, rotifers and protozoa as they move.

How do I make a hanging-drop preparation on a cavity slide?

Put a thin ring of petroleum jelly round the edge of a coverslip and place a small drop of culture in its centre. Turn the cavity slide upside down over the coverslip so the hollow sits above the drop, press gently, then turn the slide right way up; the drop now hangs from the coverslip into the cavity.

How do I find a hanging drop under the microscope?

Start with the low-power objective and reduced light, and focus on the edge of the drop, which shows as a dark curved line. Centre the edge, then change to a higher objective and refocus carefully. Closing the diaphragm improves contrast for unstained living cells.

Can the high-power objective be used on a cavity slide?

Low and medium power work well. High-power objectives have a very short working distance, so they can focus only on material just under the coverslip, as in a hanging drop; specimens lying deeper in the cavity are out of their reach. Focus upwards carefully so the lens does not press on the coverslip.

Why are concavity slides made from thick glass?

The extra thickness allows a hollow of useful depth to be ground into the glass while leaving enough glass beneath it for strength. A thin slide with the same cavity would be weak at the centre and easy to crack.

How do I clean concavity slides after a live-specimen practical?

Remove the coverslip, wipe off petroleum jelly with a tissue, then soak the slides in warm water with detergent and clean the cavity with a soft brush or cotton bud. Disinfect slides that held bacterial cultures first. Rinse in distilled water and dry before storing.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)