Quick Answer: B.O.D Bottles are glass bottles used in the biochemical oxygen demand (BOD) test, which measures how much dissolved oxygen microbes use while breaking down organic matter in water. BOD bottles have a stopper shaped to shut out air, so the oxygen in the sample can be measured before and after incubation.
How BOD Bottles Are Used
In a BOD test, a water sample, diluted if necessary with aerated dilution water, is filled into two or more bottles right to the top so that no air bubble is trapped. The stopper, which is usually tapered to a point, pushes out excess liquid as it is inserted. Dissolved oxygen is measured in one bottle straight away and in another after incubation in the dark, commonly for five days at 20 °C. The difference, corrected for dilution, is the BOD, a standard indicator of organic pollution in rivers, lakes and sewage.
The flared lip around the neck holds a little water above the stopper, a water seal that stops air entering during incubation; some bottles also take a plastic cap over it. Oxygen is read either by Winkler titration, which fixes the oxygen as a precipitate inside the same bottle, or with a dissolved oxygen meter using a probe made to fit the neck.
Biology students also use these bottles for the light and dark bottle method. Pond water is sealed in a clear bottle and a blackened one and suspended in the pond: oxygen falls in the dark bottle through respiration only, and changes in the light bottle through photosynthesis and respiration together, so gross and net primary productivity can be calculated. A 300 ml BOD bottle is listed separately; the capacity of these bottles is not stated.
Applications
- BOD testing of river, lake, well and wastewater samples in environmental science labs
- Monitoring treatment plant performance in college and municipal practicals
- Light and dark bottle measurement of primary productivity in ecology fieldwork
- Winkler dissolved oxygen practicals in chemistry and biology classes
Cleaning and Handling
- Keep each stopper with its own bottle, because a ground stopper may not seal well in another bottle; number both with a marker that survives washing.
- Clean the bottles thoroughly and rinse them well; traces of detergent or organic matter use up oxygen and raise results.
- Store bottles with a strip of paper between stopper and neck so they do not seize.
- Handle filled bottles by the body, not the stopper, when moving them to and from the incubator.
Specifications
| Item | BOD (biochemical oxygen demand) incubation bottles |
| Stopper | Designed to exclude air when inserted |
| Neck | Flared lip for a water seal |
| Main methods | BOD test; light and dark bottle productivity studies |
Why Choose LabEquip
Environmental science departments, public health labs and ecology teachers buy these bottles in sets, because every sample needs at least two. LabEquip lists them in Biology Lab Products; send the quantity and capacity you require through the contact page.
Related Products
- BOD Bottle 300ml: A glass BOD bottle with a stated 300 ml capacity, the size used in the standard dilution method.
- Aspirator Bottles, Screw Cap with Tubulation: An aspirator bottle with tubulation that serves as a reservoir for dilution water.
- Reagent Bottle, Narrow Mouth (Clear Glass): A clear glass narrow-mouth reagent bottle for keeping the solutions used in dissolved oxygen titrations.
Frequently Asked Questions
What is a BOD bottle used for?
A BOD bottle holds a water sample during the biochemical oxygen demand test, which measures how much dissolved oxygen microbes use while breaking down organic matter. The more organic pollution there is, the more oxygen they consume. Biology students also use BOD bottles for the light and dark bottle method.
Why does a BOD bottle have a pointed stopper?
The stopper is tapered so that, as it is pushed into a bottle filled to the brim, it displaces the excess liquid and leaves no air bubble behind. A trapped bubble would add oxygen to the sample and spoil the result, so the stopper is designed to shut out air completely.
What is the flared lip around the neck of a BOD bottle for?
The flared lip holds a small amount of water above the inserted stopper. This water seal stops air from leaking into the bottle during the days of incubation. Some bottles also take a plastic cap over the lip to keep the seal from drying out.
How long and at what temperature is a BOD sample incubated?
The standard test incubates the sealed bottles in the dark for five days at 20 °C. Dissolved oxygen is measured in one bottle at the start and in a matching bottle at the end; the difference, corrected for any dilution, is the five-day BOD. Darkness prevents algae from adding oxygen by photosynthesis.
How is dissolved oxygen measured in a BOD bottle?
Either by Winkler titration, in which reagents added to the bottle fix the oxygen as a precipitate that is later titrated, or with a dissolved oxygen meter whose probe fits the neck of the bottle. Winkler titration needs only glassware and reagents, so it is common in teaching labs.
What is the light and dark bottle method?
Pond water is sealed in one clear bottle and one blackened bottle and suspended in the pond. Oxygen falls in the dark bottle through respiration alone and changes in the clear bottle through photosynthesis and respiration together. Comparing the two gives the gross and net productivity of the plankton.
Last Updated: November 2026










Reviews
There are no reviews yet.