Quick Answer: The Aspirator Bottles, Screw Cap with Tubulation are reservoir bottles closed by a screw cap at the top and fitted with a tubulation, a short side-tube, near the base. An aspirator bottle with tubulation takes rubber or silicone tubing, or a tap fitted through a bung, so liquid can be run off from the bottom.
Tubulation and Screw Cap Explained
A tubulation is the short tubular outlet formed in the lower wall of the bottle. It is the simplest outlet design: a length of flexible tubing slides over it and is closed with a pinch clip or roller clamp, or a stopper carrying a tap is pushed into it. Tubing makes it easy to lead liquid to a point away from the bottle, such as a sink, a chromatography column or a row of culture vessels.
The screw cap closes the top more securely than a loose stopper. It keeps dust and airborne microbes out of stored distilled water, cuts evaporation and lets the bottle be carried without spilling. When dispensing, open the cap a little or use a vented cap, because a fully sealed bottle builds up a partial vacuum and the outflow slows to a stop.
For a ground-glass outlet that takes a stopcock directly, compare the aspirator bottle with socket outlet.
Specifications
| Item | Aspirator bottle with screw cap and bottom tubulation |
| Top closure | Screw cap |
| Outlet | Tubulation for flexible tubing or a stoppered tap |
| Typical uses | Distilled water, buffer and media reservoirs |
Applications
- Distilled or deionised water reservoirs on staining and washing benches
- Feeding buffer or eluent to chromatography and electrophoresis set-ups through tubing
- Dispensing prepared media or solutions into a series of tubes or flasks
- Supplying rinse water to a sink-side wash station for glassware
Using the Tubulation Safely
- Use tubing of the right bore so it grips the tubulation firmly, and secure it with a hose clip if the bottle is tall.
- Replace perished or cracked rubber tubing, which can split and empty the aspirator bottle with tubulation onto the bench.
- Never lever tubing off the tubulation sideways; soften it in warm water or cut it free, because the glass outlet can snap.
- Clean the bottle and tubing together, and run clean water through the outlet before storing it.
Why Choose LabEquip
Microbiology, biochemistry and school biology labs use screw-cap aspirator bottles where stored water or buffer must stay clean for days at a time. LabEquip lists them in Biology Lab Products; tell us the capacity and whether you need a tap or tubing through the contact page.
Related Products
- Aspirator Bottles, Screw Cap with Socket Outlet: The same style of bottle with a ground-glass socket outlet that takes a stopcock directly.
- Aspirator Bottle, Deluxe: The deluxe aspirator bottle, a bench reservoir normally fitted with a stopcock or tap on its lower outlet.
- Aspirator Bottle: The general aspirator bottle page, which also covers its use in respiration experiments.
- Laboratory Storage Bottle with Screw Cap: A glass laboratory storage bottle with a screw cap for stock solutions kept without a bottom outlet.
Frequently Asked Questions
What is a tubulation on an aspirator bottle?
A tubulation is a short tubular outlet formed in the lower wall of the bottle. Flexible tubing slides over it, or a stopper carrying a tap is pushed into it, so liquid can be run off from the bottom of the bottle. It is the simplest kind of bottom outlet and lets liquid be led to a point away from the bottle.
How is the flow from a tubulation outlet controlled?
With tubing fitted, a pinch clip or a roller clamp on the tubing opens and closes the flow; a roller clamp also allows fine adjustment. Alternatively, a stopper with a glass or plastic tap is pushed into the tubulation. Make sure the tubing or stopper fits snugly so it does not leak under the weight of liquid above it.
How do I remove tight tubing from a glass tubulation without breaking it?
Do not twist or lever hard, because the glass outlet can snap and cut your hand. Wet or warm the tubing to soften it and ease it off gently. If it still will not move, cut the tubing lengthwise with a blade, keeping the edge away from the glass, and peel it off. Fit new tubing when reassembling.
Why is a screw cap better than a loose stopper on a water reservoir?
A screw cap keeps dust and airborne microbes out of stored distilled water, reduces evaporation and lets the bottle be moved without spilling. When dispensing, loosen it slightly or use a vented cap, because a fully sealed bottle builds up a partial vacuum and the flow from the tubulation slows to a stop.
Can a tubulation aspirator bottle feed liquid to other apparatus?
Yes. Tubing from the tubulation can carry buffer or eluent by gravity to a chromatography column, an electrophoresis set-up or a row of culture vessels. Raising the bottle increases the flow and lowering it reduces the flow, so set its height to suit the apparatus and keep the liquid level above the outlet.
What kind of tubing should be fitted to the tubulation?
Rubber or silicone tubing with a bore that grips the outlet firmly is usual. Silicone tubing stays flexible, does not give the water a taste and generally withstands repeated autoclaving better than ordinary rubber. Replace any tubing that has become hard, cracked or sticky, since it can leak or contaminate the contents.
Last Updated: November 2026










Reviews
There are no reviews yet.