Quick Answer: The Aspirator Bottles, Screw Cap with Socket Outlet are reservoir bottles with a screw cap on top and a ground-glass socket at the bottom outlet. An aspirator bottle with socket outlet accepts a stopcock with a matching ground cone, so liquid is dispensed straight from a tap on the bottle.
What a Socket Outlet Adds
A socket outlet is a ground-glass female joint formed at the base of the bottle. It is made to accept a stopcock, or tap, whose outlet ends in a matching male cone. Because the ground surfaces fit closely, the tap seals without rubber bungs or tubing, and it can be removed for cleaning or replaced if it breaks. Joint sizes are standardised, so the size of the socket must match the cone on the tap.
This design gives cleaner, more controlled dispensing than a tubulation with tubing. There is no rubber to perish or taint the contents, the liquid meets only glass and the tap key, and a turn of the key starts or stops the flow directly over a beaker or flask. The screw cap on top keeps the reservoir closed between uses; loosen it or use a vented cap when dispensing so air can replace the liquid.
The aspirator bottle with tubulation is the simpler alternative when tubing is preferred.
Specifications
| Item | Aspirator bottle with screw cap and socket outlet |
| Outlet | Ground-glass socket for a stopcock with matching cone |
| Top closure | Screw cap |
| Typical uses | Tap dispensing of distilled water and reagents |
Looking After the Ground Joint
- Apply a thin film of suitable grease to a glass stopcock cone, or use a PTFE key that needs none, so the joint neither leaks nor seizes.
- Secure the stopcock with a joint clip if it tends to work loose.
- Remove the tap before washing the aspirator bottle with socket outlet, and never leave alkaline solutions standing in a ground joint, as they can make it stick.
- Store the bottle with the tap removed or loosened, with a strip of paper in the joint.
Applications
- Bench reservoirs of distilled water dispensed directly by tap into beakers and flasks
- Stock solutions for titration benches and staining stations where rubber contact is undesirable
- Reagent supply in teaching labs where students dispense their own aliquots
- Water supply for rinsing electrodes and glassware
Why Choose LabEquip
Laboratories that dispense water or reagents many times a day prefer a tap fitted directly to the bottle, and a ground socket makes that tap replaceable. LabEquip lists these bottles in Biology Lab Products; send the joint size and capacity you need through the contact page.
Related Products
- Aspirator Bottles, Screw Cap with Tubulation: The same style of bottle with a tubulation outlet, the simpler choice when tubing is preferred to a ground-glass tap.
- Aspirator Bottle: The general aspirator bottle page, which explains how gravity outflow and air intake work.
- Reagent Bottle With Screw Cap: A reagent bottle with a screw cap for storing prepared solutions that are poured rather than tapped.
Frequently Asked Questions
What is a socket outlet on an aspirator bottle?
A socket outlet is a ground-glass female joint formed at the base of the bottle. It accepts a stopcock whose outlet ends in a matching ground cone, so the tap fits directly onto the bottle and seals glass to glass without a rubber bung or tubing. The tap can be taken out for cleaning or replaced if it breaks.
Why choose a ground-glass socket outlet instead of a tubulation?
With a socket outlet the liquid touches only glass and the tap key, with no rubber to perish or taint the contents, and a turn of the tap starts or stops the flow right over the receiving vessel. A tubulation with tubing is simpler and lets liquid be led further away, but it is less clean for sensitive reagents.
Does a stopcock in a ground-glass socket need grease?
A glass stopcock key needs a thin, even film of suitable grease so it turns smoothly and does not leak or stick. A PTFE key needs no grease. Too much grease can creep into the bore and contaminate the liquid, so apply only a light film to the upper and lower parts of the key.
How do you free a stopcock that has seized in the socket?
Soak the joint in warm water for a while, then try to turn the key with a gentle, steady twisting pressure. Never force it with tools or heat it in a flame, as the socket can crack. To prevent seizing, clean and dry the joint after use and store the bottle with the key loosened or removed.
How do I know which stopcock fits a socket outlet?
Ground-glass joints are made in standard sizes, usually marked with two numbers giving the joint’s diameter and ground length in millimetres. The cone on the stopcock must carry the same size marking as the socket on the bottle, or it will not seal. Matching markings are the quickest way to pair a spare tap with the bottle.
Why must the screw cap be loosened when dispensing from the bottle?
As liquid flows out of the tap, air must get in at the top to replace it. With the screw cap tight, a partial vacuum forms inside and the flow slows and then stops. Loosen the cap a little, or use a vented cap, while dispensing, and close it again afterwards to keep dust out of the reservoir.
Last Updated: November 2026










Reviews
There are no reviews yet.