IC Regulated Power Supply 30V 1A

The IC regulated power supply 30V 1A is a laboratory DC power source used for powering, testing and demonstrating compatible low-voltage electronic circuits. It is intended for school, college, university and technical training laboratories that require a controlled output for supervised electronics experiments and component evaluation.

Product Description

The STEMAids IC Regulated Power Supply 30V 1A provides regulated DC power for compatible laboratory circuits and electronic devices. An integrated-circuit regulation stage helps maintain the selected output more consistently than an unregulated supply when the input or connected load changes within the unit’s rated operating limits.

The power supply is suitable for practical work involving resistors, semiconductor devices, transistor circuits, operational amplifiers and basic electronic systems. Its exact output range, adjustment controls, metering arrangement, ripple performance and protection functions should be confirmed before procurement.

Key Features

• 30V, 1A capacity: Rated for a maximum stated output capacity of 30 volts and 1 ampere.
• Regulated DC output: Supports stable operation of compatible low-voltage laboratory circuits.
• IC-based regulation: Uses an integrated-circuit control stage for output regulation.
• Hands-on learning: Helps students study voltage, current, load behaviour and DC circuit operation.
• Bench-top application: Suitable for supervised electronics experiments and routine circuit testing.
• Reusable laboratory apparatus: Supports repeated practical sessions when operated within its ratings.
• Institutional suitability: Relevant to schools, colleges, universities, polytechnics and vocational laboratories.

Technical Specifications

What’s Included in the Kit

• One IC Regulated Power Supply 30V 1A
• AC input power lead
• DC connecting leads
• Operating instructions
• Additional experiment accessories

Applications and Uses

• Powering compatible DC electronic circuits
• Testing resistors, diodes, LEDs and semiconductor components
• Conducting transistor and operational-amplifier experiments
• Studying Ohm’s law and load-current relationships
• Supporting breadboard circuit development and troubleshooting
• Demonstrating regulated and unregulated power-supply concepts

Browse related electrical and electronics laboratory apparatus and the complete physics laboratory equipment range.

How to Use the IC Regulated Power Supply 30V 1A

1. Place the power supply on a dry, stable and ventilated laboratory bench.
2. Check the product rating plate and confirm the permitted mains input.
3. Keep the unit switched off before connecting the experimental circuit.
4. Set the output control to its minimum position, where applicable.
5. Connect the positive and negative output terminals with correct polarity.
6. Switch on the unit and increase the voltage gradually to the required value.
7. Monitor the connected circuit and keep its current demand below 1A.
8. Return the output to minimum, switch off the supply and disconnect the circuit after use.

Safety note: Do not short-circuit the output or exceed the marked voltage and current ratings. Never open the enclosure while the unit is connected to mains power. Student use requires competent adult supervision.

Care & Maintenance

• Disconnect the unit from mains power before cleaning or inspection.
• Clean the exterior with a dry cloth and keep liquids away from terminals and ventilation openings.
• Store the power supply in a dry, dust-controlled location with cables loosely coiled.
• Stop using the unit if its cable, plug, terminals, enclosure or controls are damaged.

Why Choose STEMAids

STEMAids manufactures and supplies scientific laboratory instruments, educational experiment setups, science kits and STEM learning equipment. The company supports schools, colleges, training laboratories, institutional buyers and export requirements. Its product range is structured for practical science teaching and repeatable classroom use. Buyers can review the STEMAids company information and institutional and tender supply services before procurement.

Frequently Asked Questions

What is an IC regulated power supply 30V 1A used for?

It is used to provide regulated DC power to compatible electronic circuits requiring no more than the unit’s confirmed voltage range and 1A current capacity.

Is the output voltage adjustable?

The product name confirms a 30V, 1A rating, but the exact adjustment range has not been verified. Confirm whether the output is variable or fixed before ordering.

Can this power supply be used for transistor experiments?

Yes, it can power compatible transistor biasing, characteristic and amplifier circuits when the selected voltage and current remain within safe component ratings.

Can it power a circuit that draws more than 1A?

No. A circuit requiring more than 1A exceeds the stated current capacity and may cause unstable operation, overheating or protective shutdown if protection is provided.

Does the power supply convert AC mains to DC?

A laboratory regulated DC supply normally accepts an AC input and delivers a controlled DC output. The exact mains input rating must be checked on the product label.

Is it suitable for school and college laboratories?

Yes. It is suitable for supervised physics, electronics and technical-training laboratories where low-voltage DC circuits are studied or tested.