Search

In Stock

Microbiology Table for Technibec

₹3,260.00

Quick Answer: The Technibec microbiology table is a small sheet-metal work table that stands over the Technibec electric burner. In the listing photo it is golden-coloured, on four short legs, with a square opening in the centre above the heat and a row of holes along one edge for holding culture tubes.

A Workstation Built Around the Burner

In microbiology, anything that is opened should be opened close to the heat, and the operator needs somewhere to put tubes, loops and dish lids down for a moment without them touching the bench. This table creates that zone. Placed over the Technibec 2.0 electric burner, its central opening lets the heat rise through the table top while the flat surface around it becomes a working area.

The row of holes along one side, visible in the photo, holds culture tubes upright within reach of the heat, so a transfer from one tube to another happens without either tube leaving the warm zone. Petri dishes can be opened on the surface nearby. The golden finish shown in the photo should be cleaned only when the table is cool.

The table is not a stand-alone item. It has no heating element of its own, relies entirely on the burner beneath it, and is named for the Technibec; fit on other burners should not be assumed.

Applications

  • Subculturing from one broth tube to another with both tubes held upright near the heat
  • Streak-plate practicals in which the dish lid is lifted only within the warm zone
  • Organising loops, tubes and a marker pen on one surface during timed microbiology assessments
  • Demonstration benches where the teacher needs a tidy aseptic area visible to the class

Specifications

Item Microbiology work table for the Technibec electric burner
Top Flat sheet-metal surface with a square central opening (photo)
Tube holding Row of holes along one edge for culture tubes (photo)
Legs Four short legs that stand over the burner (photo)
Finish Golden colour, as photographed

Care & Handling

  • Set the table on the burner only when both are cold, and check that the opening is centred over the heating zone.
  • Keep plastic items such as Petri dishes and pipette tips away from the edge of the central opening, where the heat is strongest.
  • Clean with detergent and then the lab’s surface disinfectant after each session, once the table has cooled.
  • Lift the table off by its outer edges; the area around the opening stays hot longest.

Why Choose LabEquip

Microbiology teachers who use the Technibec burner and want every student to follow the same aseptic routine are the buyers of this table. LabEquip lists it among its chemistry lab equipment; burner and table sets can be requested together through the contact page.

Related Products

Frequently Asked Questions

How is the Technibec microbiology table used with the electric burner?

The table stands on four short legs over the Technibec electric burner, so heat rises through its square central opening. The flat top around the opening becomes the working area for loops and dish lids, and the row of holes along one edge holds culture tubes upright close to the heat, so transfers are made in the warm zone.

Does the microbiology table heat or sterilise anything by itself?

No. The Technibec microbiology table is an unpowered sheet-metal stand; all the heat comes from the burner underneath. It organises the area around that heat. Loops still need to be heated to red heat and tube mouths passed through the warm zone as in any aseptic technique.

Why work close to the heat during aseptic transfers?

Rising warm air above a burner carries airborne particles upwards and away from open tubes and plates, so working in that zone lowers the chance of contamination. Opening tubes, flaming loops and lifting dish lids should all happen near the heat and for as short a time as possible.

Can Petri dishes be put on the Technibec table top?

Plate lids or closed dishes can rest on the flat area briefly, but keep plastic dishes away from the central opening where the hot air rises, because polystyrene softens with heat. Most of the work surface is metal, so check its temperature with the back of the hand before setting anything down.

Can the table be used without the burner as a tube rack?

Its row of holes will hold culture tubes upright on a bench, but the table’s real purpose is to frame the heat of the Technibec burner. For storing or incubating tubes, an ordinary test tube rack is more stable and holds more tubes.

How should the microbiology table be cleaned after a practical?

Let it cool fully, then wipe the top and the tube holes with a laboratory disinfectant and dry it, because spilled culture can collect in the holes. Never use alcohol sprays while the burner below is hot; disinfect after switching off and cooling.

Last Updated: November 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)