Search

In Stock

Propellers for PowerUp 2.0 and 4.0

Hélices pour PowerUp 2.0 et 4.0 Enables rapid technical iteration of airframe designs at the "Create" cognitive level, minimizing classroom downtime during high-cadence flight testing.

Dynamic Rotor Balancing supports the technical "Analysis" of vibrational dampening and its impact on flight stability and energy consumption in autonomous propulsion modules.

₹600.00

Quick Answer: These are spare PowerUp propellers for the PowerUp 2.0 and PowerUp 4.0 electric power modules, which turn a folded paper plane into a motorised flyer. The propeller is the part most often damaged in crash landings, so classes using PowerUp planes keep spares to stay flying.

How a Propeller Produces Thrust

Each propeller blade is a small rotating wing. Set at an angle to its path, it pushes air backwards as it spins, and by Newton’s third law the air pushes the propeller, and the plane, forwards. The thrust depends on how fast the propeller turns, the size of its blades and their pitch, the angle that sets how far the propeller would screw forward in one turn if air were solid.

Because thrust depends so strongly on blade shape, a cracked, bent or chipped propeller loses thrust and can also vibrate, shaking the light paper airframe and spoiling the flight. Replacing it with a matching spare restores the original performance, which matters when students compare different plane designs and want the power module to behave the same every time.

Specifications

Item Spare propellers
Listed for PowerUp 2.0 and PowerUp 4.0 power modules
Function Produce thrust for an electric paper plane
Physics shown Thrust from Newton’s third law
Replace when Blades are cracked, bent or chipped
Quantity per pack Confirm at enquiry

Using Spares in a Paper-Plane Project

In a typical lesson, groups fold different airframes, fit the same power module and compare flight distance or time aloft. Crash landings are part of the fun, and the propeller, the most exposed part, takes the knocks. Keeping spares to hand means a broken blade costs a minute rather than ending a group’s session.

Fit a propeller as the module’s instructions show, without bending the motor shaft, check that it spins freely without touching the paper, and make sure it faces the right way so it drives air backwards. LabEquip also lists the PowerUp 2.0 airplane that these spares serve.

Where Spares Are Needed

  • Replacing damaged propellers during paper-plane flight lessons
  • Keeping the power module identical when comparing airframe designs
  • Discussing thrust, pitch and Newton’s third law

Care & Handling

  • Switch the module off before handling the propeller
  • Keep fingers and faces clear of a spinning propeller and launch away from people
  • Store spares flat in their packaging so the blades do not warp
  • Discard any propeller with a crack, which can break apart at speed

Why Choose LabEquip

Schools running PowerUp paper-plane projects buy spare propellers so that a damaged blade does not end the lesson. LabEquip supplies them with other physics lab equipment; ask about quantities for a class through LabEquip contact.

Frequently Asked Questions

Do these propellers fit both PowerUp 2.0 and 4.0?

They are listed for both the PowerUp 2.0 and PowerUp 4.0 modules. If you use an older or modified unit, compare its propeller fitting with a spare before the lesson.

How does a propeller push the plane forward?

Its blades push air backwards as they spin. By Newton’s third law the air pushes back on the blades, giving a forward force called thrust.

When should a propeller be replaced?

Replace it if a blade is cracked, chipped or bent, or if the plane vibrates more than usual. Damaged blades give less thrust and can break apart.

Why does a damaged propeller make the plane vibrate?

A propeller with an uneven blade is out of balance, so it shakes the motor every turn. On a light paper airframe that vibration upsets the flight.

What is propeller pitch?

Pitch describes the blade angle as the distance the propeller would move forward in one turn if it screwed through a solid. Higher pitch moves more air per turn but needs more power.

How should propellers be fitted?

Fit the propeller as the module’s instructions show, without bending the motor shaft, make sure it faces the correct way, and check that it spins freely without touching the paper.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)