Search

In Stock

Dynamo Lamp

Lampe dynamo, Battery-Free Capacitive Storage enables the technical analysis of energy retention and discharge curves at the "Analyze" cognitive level, reinforcing thermodynamic and circuit principles.

High-Impact Ruggedized Chassis Ensures hardware durability during repetitive vocational training cycles, maintaining evidentiary-grade results across large-scale student cohorts.

₹435.00

Quick Answer: A dynamo lamp is a hand-powered torch in which turning a crank or handle spins a small generator, and the electricity it produces lights the lamp. A dynamo lamp lets students feel the work they put in being converted into electrical energy and then light, with no battery needed to start.

Electromagnetic Induction in the Hand

Inside the body, a gear train turns the slow movement of the handle into fast rotation of a permanent magnet near a set of coils, or of coils near a magnet. As the magnetic field through each coil changes, a voltage is induced across it, as Faraday’s law describes, and the faster the magnet turns, the larger that voltage. Turning the handle faster therefore makes the lamp brighter.

Students also notice that the handle becomes harder to turn when the lamp is on than when the circuit is open. The induced current creates its own magnetic field that opposes the rotation, as Lenz’s law states, so more work is needed to keep the magnet spinning. That extra effort is exactly the energy being delivered to the lamp.

With or Without Storage

Some hand-powered torches light only while the handle turns; others feed a rechargeable cell or capacitor so the light continues for a while afterwards. Whether this lamp stores energy can be confirmed before ordering, and either type supports the same lessons on generators and energy transfer. A torch that lights only while being turned is especially clear for showing the link between effort and brightness.

Specifications

Product Hand-powered torch with built-in dynamo
Generator Hand-turned magnet and coil, driven through gears
Principle Electromagnetic induction
Power source The user’s effort; no battery needed to generate light
Lamp type and energy storage Confirm at enquiry

Lessons and Activities

  • Demonstrating electromagnetic induction and the principle of the generator
  • Feeling Lenz’s law as extra effort when the lamp is switched on
  • Tracing the energy chain from food energy to kinetic, electrical and light energy
  • Comparing turning speed with brightness as a simple qualitative investigation

Care & Handling

  • Turn the handle smoothly; jerking or reversing it forcefully can strip the gears
  • Store the lamp in a dry place with the handle protected from knocks
  • Open the case only if the model is designed to be taken apart, and keep the small parts together
  • Keep the lens clean so the light output can be compared fairly

Why Choose LabEquip

Physics teachers buy these torches because students can feel the generator effect for themselves rather than only read about it. LabEquip supplies them with the rechargeable LED dynamo lamp, an electric dynamo and other physics lab equipment; contact LabEquip to confirm the version.

Frequently Asked Questions

How does turning the handle make electricity?

The handle spins a magnet near coils through a set of gears. The changing magnetic field through the coils induces a voltage, which drives a current through the lamp.

Why does the lamp get brighter when the handle turns faster?

A faster-changing magnetic field induces a larger voltage, so more current flows and more energy reaches the lamp each second.

Why is the handle harder to turn when the lamp is on?

The current in the coils produces a magnetic field that opposes the motion, by Lenz’s law. Extra work is needed to overcome it, and that work becomes the electrical energy used by the lamp.

Does the lamp need batteries?

No battery is needed to generate the light, since the user supplies the energy. Some models also store energy in a rechargeable cell to keep the light on after turning stops.

What are the gears for?

Hand turning is slow. The gears make the magnet spin many times faster than the handle, which is needed to induce a useful voltage.

How does it differ from a solar torch?

This lamp converts kinetic energy from the user into electrical energy by induction, while a solar torch converts light energy using a photovoltaic panel.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)