Search

In Stock

Weight, 20Kg, Class F1

Non-Magnetic Austenitic Stainless Steel: Forged from high-grade alloys with a magnetic susceptibility (χ) below 0.05, preventing measurement discrepancies caused by electromagnetic interference in sensitive industrial weighing environments.

Sub-Micrometer Mirror Finish: Features a precision-polished surface to mitigate particulate accumulation and atmospheric oxidation, integrated with a secure internal adjustment cavity for exact mass regulation during long-term duty cycles.

₹2,245.00

Quick Answer: The Weight, 20Kg, Class F1 is a single 20 kg reference weight titled in accuracy class F1. Laboratories use a 20 kg F1 weight to test high-capacity precision balances near the top of their range, where the reference must be both heavy and very close to its nominal value.

Handling a 20 kg Reference Safely

A 20 kg weight can injure the person lifting it and damage a balance if it slips. Lift it close to the body with bent knees and a straight back, or use a lifting aid; move it between rooms on a trolley with a raised edge rather than carrying it. When placing it, bring it level with the pan first and lower it vertically onto the centre, never swinging it in from above.

Weights of this size are made either as cylinders with a knob or as rectangular blocks with a handle, and the grip each offers is different. The form of this weight, and any lifting accessory to go with it, can be confirmed at enquiry.

Cleaning Without Changing the Mass

Dust is removed with a soft brush and a dry, lint-free cloth. Fingerprints leave grease and moisture, which is why reference weights are handled with gloves at all times. If a solvent such as alcohol has to be used to remove stubborn contamination, the weight must be left to stabilise afterwards before it is used, because traces of solvent and moisture evaporate only slowly. Abrasive pads and polishes are never used, since they remove metal.

Taking the Weight to Another Site

Calibration engineers often carry heavy references to the balance rather than the other way round. The weight travels in a padded, closed case, is inspected for knocks on arrival, and is left in the room with the balance until it has reached the same temperature. A large weight changes temperature slowly, so this wait is longer than for small pieces.

Specifications

Nominal value 20 kg, as titled
Accuracy class F1, as titled
Supplied as Single individual weight
Handling Gloves, with a trolley or lifting aid recommended
Shape, material, handle or knob and calibration documents Confirm at enquiry

Applications

  • Upper-range span tests on high-capacity precision balances
  • Repeatability tests at heavy load on floor-standing and bench balances
  • Reference for calibrating 20 kg M-class weights by comparison
  • On-site calibration visits where the reference is carried to the balance

Care & Handling

  • Wear clean gloves whenever the 20 kg F1 weight is handled.
  • Move it on a trolley with a raised edge and keep it on a low, sturdy shelf.
  • Clean only with a soft brush and lint-free cloth; allow time to stabilise after any solvent cleaning.
  • Inspect it after transport and send it for recalibration after any knock or drop.

Why Choose LabEquip

Pharmaceutical plants, calibration services and research labs with high-capacity balances buy a 20 kg F1 weight when the top of the range must be tested properly. LabEquip lists it in its Physics Equipments range; the 10 kg F1 weight can be paired with it for intermediate test points. Send your balance capacity and readability through the contact page.

Frequently Asked Questions

Can one person lift a 20 kg weight safely?

Many adults can with good technique, but workplace guidance often favours lifting aids or two people for repeated lifts. Using a trolley for moving the weight and lifting only for the short final placement reduces the strain.

How do I clean a 20 kg reference weight?

Brush off dust and wipe with a dry, lint-free cloth while wearing gloves. Use a solvent only when contamination will not come off otherwise, and then let the weight stabilise before using it.

Why does a dropped weight need recalibration even if it looks undamaged?

A dent displaces material, a small chip removes it, and a jolt can loosen the seal of an adjusting cavity. None of these may be obvious, so the only safe course is to recalibrate before trusting the weight again.

How should the weight be moved between laboratories?

In a closed, padded case on a trolley, then left beside the balance until it reaches room temperature. Check it for damage on arrival and note the move in its log.

Is a 20 kg F1 weight needed for an ordinary bench scale?

Usually not. F1 is aimed at precision balances with fine resolution at high load. For bench scales with coarser intervals, an F2 or M1 weight of the same value is normally adequate.

Why do heavy weights take longer to reach room temperature?

A large weight stores much more heat for each square centimetre of surface through which it can exchange heat with the air, so its temperature changes slowly. Until it settles, air currents around it disturb the balance reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)