Quick Answer: The Masses (Weights) Set, Analytical is a cased set of weights intended for analytical weighing: direct use on two-pan chemical balances and reading checks on electronic analytical balances. An analytical weights set is handled only with forceps or gloves and kept in its case so that each stated mass stays true.
Where Analytical Weights Fit
Chemistry and pharmacy laboratories weigh small quantities to the milligram or better, and every result traces back to known masses. On a traditional two-pan analytical balance the weights are placed directly against the sample, often with a rider on the graduated beam for the finest adjustment. On an electronic analytical balance they are used to confirm that the instrument still reads correctly: a known weight goes on the pan and the displayed value is compared with its nominal mass.
Analytical weights are smaller relatives of the weights used with school physical balances, but they are intended for tighter tolerances and handled accordingly. The tolerance class, materials and individual pieces of this set should be confirmed when ordering, so that the set matches the balances it will serve.
Checking a Set Against Itself
A weight set can be tested for internal consistency on a sensitive balance even without outside references. Sets are usually built so that some combinations share the same nominal value: two pieces of equal value should read alike, and a 5 g piece should match a 2 g, a second 2 g and a 1 g piece together. Weighing each piece and each matching combination in turn, and noting the differences, makes a damaged or contaminated piece stand out from the rest.
The test cannot prove the whole set right, since every piece could share the same error, but it catches the commonest problem: one piece that has been dropped, scratched or handled with bare fingers.
Small Effects That Matter at This Level
At analytical precision, effects ignored in school weighing become visible. A weight warmed by the hand creates a rising current of air that drags on the pan and lightens the reading, so weights are lifted with forceps and left to reach room temperature. Fingerprints add a film of oil and moisture. Air buoyancy acts on everything on the pan, and weights are adjusted on the convention of a standard density so that, in normal air, objects of similar density compare correctly.
Applications
- Weighing on two-pan analytical (chemical) balances in chemistry and pharmacy labs
- Routine reading checks of electronic analytical balances against known masses
- Gravimetric analysis, where crucibles and residues are weighed repeatedly
- College practicals on weighing technique and sources of error
Specifications
| Set type | Analytical weights in a fitted case |
| Use | Analytical balances: direct weighing or reading checks |
| Handling | Forceps or gloves; no bare-hand contact |
| Typical companions | Two-pan chemical balance or electronic analytical balance, desiccator |
| Pieces, material and tolerance class | Confirm at enquiry |
Care & Handling
- Lift every piece of the analytical weights set with forceps or clean gloves, never with bare fingers.
- Let weights reach the balance-room temperature before use, and never place a piece on the pan straight after holding it.
- Return each piece to its own recess and keep the case closed against dust and fumes.
- Do not clean weights with abrasives; remove dust with a soft brush, and recheck any piece that has been dropped.
Why Choose LabEquip
Analytical sets are bought by chemistry, pharmacy and food-testing labs that need weighing they can trust in assays and practical examinations. LabEquip supplies this set from its Physics Equipments range; for calibration-level work, the 1 mg to 200 g Class E2 weight set is also listed. Tell us your balance capacity and readability through the contact page so the set can be matched.
Frequently Asked Questions
How is an analytical weights set different from a school weight box?
A school weight box is made for general weighing on physical balances, where small errors do not matter. An analytical set is intended for weighing at milligram level and is handled with more care, because at that level a fingerprint or a dropped piece changes the result.
Why must weights not be touched by hand?
Skin leaves moisture, salt and oil that add mass and can corrode metal over time, and hand warmth heats the weight. A warm weight sets up air currents around the pan that change the reading until it cools.
How can I check whether one weight in the set has changed?
Compare it with other pieces or combinations of the same nominal value on a sensitive balance. If one piece disagrees with all the others, it is the likely culprit and should be cleaned, inspected and rechecked against a reference weight.
Can these weights be used to check an electronic balance?
Yes, that is one of their main uses. Place a weight of known nominal value in the centre of the pan and compare the reading. A difference larger than the balance’s stated tolerance suggests it needs adjusting or servicing.
Why do weights need to reach room temperature?
A weight warmer than the air heats the air around it, which rises and drags on the pan, so the weight appears lighter; a cold weight does the opposite. Leaving weights in the balance room before use removes the effect.
What should I do if a piece is dropped?
Inspect it for damage, clean it gently with a soft brush and compare it with another piece of the same value, or have it rechecked. A dent or chip can change its mass enough to matter in analytical work.
Last Updated: October 2026










Reviews
There are no reviews yet.