Quick Answer: The Crane Scale is a hanging weighing instrument that hooks between a crane or hoist and its load, measuring the tension in the lifting line and displaying the load’s mass. A crane scale is used to weigh heavy, bulky or awkward items while they are being lifted, in workshops, warehouses, foundries and engineering laboratories.
Weighing in Tension
Unlike a platform balance, which is pressed down by its load, this instrument is pulled. Inside its body, a weighing sensor, usually a strain-gauge load cell, stretches very slightly under the tension between the top fitting and the bottom hook. When the load hangs still, that tension equals the load’s weight, and the scale converts it into a mass reading.
That makes it an industrial relative of the classroom newton meter: both measure the pull on a line. The difference is that a hanging scale of this kind is also part of the lifting gear, so its own rating and the ratings of the crane, hooks and slings all limit the load.
Specifications
| Type | Hanging scale for crane or hoist use |
| Measuring principle | Tension in the lifting line, sensed electronically |
| Mounting | Between the crane hook and the load |
| Typical users | Workshops, warehouses, foundries, engineering laboratories |
| Capacity, readability, display and power supply | Confirm at enquiry |
Safe Use in Lifting Operations
Because the scale hangs in the load path, it adds its own height and weight to the lift, and its top fitting must be properly seated in the crane hook. Lift the load slowly until it just clears the ground and let any swinging stop before reading; a swinging or bouncing load shows a reading above its true weight, because the line must also supply the force that changes the load’s motion. Keep everyone clear of the area under a suspended load, and never use the scale above its rated capacity or that of the lifting equipment.
Applications
- Weighing heavy goods, castings or machinery during lifting
- Checking loads before lifting to stay within crane or vehicle limits
- Weighing bulk bags and containers in stores and dispatch areas
- Demonstrating tension and weight measurement in engineering laboratories
Care & Handling
- Inspect the hooks, fittings and body of the scale before each use, and do not use it if a hook is bent or cracked.
- Never exceed the rated capacity of the scale or of any part of the lifting gear.
- Avoid shock loading: lift smoothly and do not let loads drop onto the hook.
- Recharge or replace the power source as the manual directs, and keep the electronics dry.
Why Choose LabEquip
Workshops, warehouses and engineering laboratories buy hanging scales to weigh items that will not fit on a platform. LabEquip lists this scale in its physics equipment category, together with a stainless steel version for wet or corrosive areas. Send the capacity and readability you need via the contact page.
Frequently Asked Questions
How does a crane scale measure weight?
It measures the tension in the line between the crane and the load. When the load hangs still, the tension equals the load’s weight, and the scale converts it to a mass reading.
Why does the reading jump when the load swings?
A swinging or bouncing load is accelerating, and the line must supply the force for that acceleration as well as support the weight. Wait until the load hangs still before reading.
Is the scale part of the lifting gear?
Yes. It sits in the load path, so it must be rated for the load and inspected like other lifting gear. Follow your site’s lifting rules and never exceed the lowest rating among the crane, scale, hooks and slings.
What is the difference between a crane scale and a spring balance?
Both measure a pull. A spring balance shows the stretch of a spring against a scale, while a crane scale uses an electronic sensor and is made for heavy industrial loads.
Why should no one stand under the load?
If a hook, a sling or the scale itself fails, the load falls. Keeping the area beneath a suspended load clear is a basic rule of safe lifting, whatever instrument is used.
Does the scale’s own weight affect the crane load?
Yes. The crane carries the scale, the rigging and the load together, so add the scale’s weight when checking against the crane’s capacity. The display shows only what hangs below the sensor.
Last Updated: October 2026










Reviews
There are no reviews yet.