Quick Answer: The High Precision – Table Top Balance – 20kg/0.1g is an electronic bench balance that weighs loads up to 20 kg and reads to 0.1 g. This 20kg table top balance combines the capacity of a platform scale with laboratory-level resolution, for weighing heavy containers and bulk samples.
200,000 Steps on One Bench Balance
Dividing 20 kg by 0.1 g gives 200,000 display divisions, far more than an ordinary bench scale of the same capacity. That resolution lets a laboratory weigh a full bucket, a crate of samples or a large mould and still see a change of a tenth of a gram, for example the water lost from a drying concrete cube or the slow evaporation from a large tank.
The other side of that resolution is sensitivity. A balance with this many steps responds to air from a fan, a bench that flexes under load and loads placed off-centre on its platform, so a dedicated, rigid table and centred loads are what make the 0.1 g step meaningful.
Specifications
| Type | Electronic table top (bench) balance, high precision |
| Maximum capacity | 20 kg |
| Readability | 0.1 g |
| Typical uses | Heavy containers, bulk samples, flow and drying measurements |
| Platform size, power supply and interfaces | Confirm at enquiry |
Measuring Flow Rate by Collecting Water
A physics and engineering use for a high-capacity, fine-reading balance is measuring flow rate. Water from a tap, pipe or flow apparatus is collected in a bucket on the balance for a timed interval; the mass collected divided by the time is the mass flow rate, and dividing by the density of water gives the volume flow rate. Weighing is more accurate than reading the level in a measuring vessel, and a 20 kg capacity allows long collection times that reduce timing error.
Care & Handling
- Set the 20kg table top balance on a rigid table that does not flex, and level it before calibrating.
- Place loads in the centre of the platform and lower them gently; a dropped 10 kg load hits with a force far above its weight.
- Protect the platform from water during flow experiments with a stable bucket and a tray, and keep splashes off the display.
- Calibrate with a heavy known mass suited to the 20 kg range.
Applications
- Flow-rate experiments by timed collection of water in fluids and hydraulics laboratories
- Drying and curing studies on large specimens such as concrete or soil blocks
- Weighing bulk ingredients and batches in food, pharmacy and production laboratories
- Checking the mass of heavy apparatus and filled containers
Why Choose LabEquip
Engineering, food and pharmacy laboratories choose a 20 kg balance with 0.1 g readability when they need to weigh heavy items but still track small changes. LabEquip lists it in its physics lab products, alongside the 3 kg/15 kg/30 kg table top balance for general bench weighing. Ask about platform and interface details through the LabEquip contact page.
Frequently Asked Questions
How is flow rate measured with this balance?
Collect the water in a bucket on the balance for a measured time, then divide the mass gained by the time. Dividing that mass flow rate by the density of water gives the volume flow rate in litres per second or per minute.
Why weigh water rather than measure its volume?
A balance reading to 0.1 g on several kilograms is far more precise than reading a water level in a large vessel, and it needs no correction for the shape of the container.
What does 20 kg with 0.1 g readability mean for resolution?
The balance can show changes of 0.1 g anywhere up to 20 kg, giving 200,000 steps. An ordinary bench scale of the same capacity often reads only to 1 g or more.
Why is the balance affected by a nearby fan?
A large platform presents a big surface to moving air, and at 0.1 g even a gentle draft pushes on it enough to change the last digit. Turn off fans near the balance or shield it.
Can this balance replace a precision balance for small samples?
No. For samples of a few grams, a balance reading 0.01 g or 0.001 g gives much better relative precision. This balance is meant for heavy loads, where 0.1 g is a small fraction of the mass.
How should a 20 kg load be placed on the platform?
Lift it with both hands or a trolley, lower it gently onto the centre of the platform and keep it clear of the edges. Lift it off the same way rather than sliding it, which strains the platform supports.
Last Updated: October 2026










Reviews
There are no reviews yet.