Search

In Stock

Electric Traffic Signal – 30 cm

LED-based red, yellow, and green signals with accurate timing circuits for realistic sequence simulation

Compact 30 cm panel with durable mounting base suitable for classroom and lab use

₹295.00

Quick Answer: The Electric Traffic Signal – 30 cm is a working model of a road traffic light, with red, amber and green lamps that light up from an electric circuit. Teachers use the electric traffic signal model to teach parallel circuits and switching in science lessons and to explain signal sequences in road safety education.

The Circuit Behind Three Lamps

A traffic light is a neat example of a parallel circuit. Each lamp has its own branch and its own switch or control line, so any lamp can be turned on without the others, and if one lamp fails the remaining two keep working. Students can trace this on the model and compare it with a series string of lamps, where one fault puts every lamp out. If the model’s lamps are LEDs, it also gives a chance to explain why each LED needs a resistor in series to limit its current.

Real signals are arranged with red at the top, amber in the middle and green at the bottom. Keeping the order fixed means a driver who cannot tell red from green can still read the signal from the position of the lit lamp, and the top lamp is the least likely to be hidden by vehicles in front. The 30 cm in the product’s name gives its size class; how that is measured, and the power source and switching arrangement, should be confirmed when ordering.

Classroom Uses

  • Showing parallel circuits and independent switching of each lamp
  • Road safety lessons on what each light means for drivers and pedestrians
  • Introducing timers, relays and automatic control systems
  • Design and technology projects on traffic management and junction models

From Manual Switching to Automatic Control

With manual switching, students operate the lamps themselves and follow the sequence used on local roads, which in many countries runs green, amber, red, with some adding red and amber together before green. The next step is to ask how a real junction does this without a person at the switches. A timer circuit, a relay sequence or a small programmable controller can step through the lamps automatically, and a microcontroller version, such as the traffic light for micro:bit, lets older students write the timing program themselves.

Specifications

Type Working model traffic light with three coloured lamps
Size 30 cm, as given in the product name
Lamp arrangement Red top, amber middle, green bottom
Teaching topics Parallel circuits, switching, sequencing, road safety
Power source, lamp type and switching Confirm at enquiry

Care & Handling

  • Power the electric traffic signal only from the battery or low-voltage supply it is designed for, never directly from the mains.
  • Switch off before opening the housing or changing lamps or wiring.
  • Keep the model upright on a stable surface, as a tall post can tip if knocked.
  • Remove batteries before storing it for a long period to prevent leakage.

Why Choose LabEquip

Primary and secondary schools buy a model signal for science rooms and road safety displays where a working light makes the lesson concrete. LabEquip lists this model in its physics lab equipment range. For the power source and switching arrangement, contact us through the LabEquip contact page.

Frequently Asked Questions

Why are the three lamps wired in parallel?

So that each lamp can be switched on and off on its own, and so that a failed lamp does not put the others out. In a series circuit, one broken lamp would break the whole circuit.

Why is the red lamp always at the top?

A fixed order lets drivers who have difficulty telling red from green read the signal by position. The top lamp is also the least likely to be hidden by vehicles ahead, which matters most for the stop signal.

What sequence should the model follow?

It depends on the local traffic rules. A common sequence is green, then amber as a warning, then red. Some countries also show red and amber together just before green, so the model can be set to match local roads.

How can students make the lights change automatically?

By adding a timer circuit, a set of relays or a programmable controller that switches each lamp in turn. Writing a short program for a microcontroller traffic light is a popular extension for older students.

Is the model suitable for younger pupils?

Yes, for road safety and simple circuit lessons under supervision, as long as it is run from its intended low-voltage supply. Older students can go further with circuit tracing and automatic control.

Why does an LED lamp need a resistor?

An LED draws a rapidly increasing current once its forward voltage is exceeded, so it needs a resistor in series to limit the current. Without one, the LED overheats and fails almost at once.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)