Quick Answer: The Convective Currents Apparatus is a demonstration in which water is heated at one point and a coloured dye shows the water circulating, making heat transfer by convection in a liquid visible. The convective currents apparatus is used in school physics lessons on heat transfer, density and circulation.
Watching Convection Happen
Apparatus of this name commonly takes the form of a closed rectangular loop of glass tubing, filled completely with water and clamped upright, with a small opening at the top. A crystal of potassium permanganate dropped through the opening sinks into one vertical side. When a small flame or spirit lamp warms the bottom corner below the opposite side, the purple stain is carried round the loop: up the heated side, across the top, down the cool side and back along the bottom.
The flow happens because the water next to the flame expands as it warms, becoming less dense than the cooler water around it. Gravity pulls the denser, cooler water down, pushing the warmer water up, and a steady circulation develops as long as heating continues. Remove the flame and the flow slows and stops as the temperatures even out, showing that the circulation is driven by the temperature difference itself.
Specifications
| Demonstrates | Convection currents in a liquid |
| Common form | Closed loop of glass tubing filled with water |
| Tracer | A crystal of potassium permanganate or a drop of food dye |
| Heat source | Small flame, spirit lamp or warm-water contact at one lower corner |
| Construction and stand supplied | Confirm at enquiry |
From the Bench to the Real World
The same mechanism drives gravity-fed domestic hot-water systems and the circulation in a kettle or a pan of soup. On a larger scale, convection in the oceans and atmosphere carries heat from the tropics towards the poles, sea breezes form when land warms faster than the sea, and slow convection in the Earth’s mantle is linked to the movement of tectonic plates. Comparing the loop with these examples helps students see why convection cannot happen in solids and why heating a liquid only from the top is so slow.
Lessons and Demonstrations
- Showing convection in water with a permanganate dye trace
- Comparing convection with conduction and radiation in heat-transfer lessons
- Explaining density changes on heating
- Modelling hot-water systems, ocean currents and mantle convection
- Investigating how the speed of the flow changes with the heating rate
Care & Handling
- Fill the loop completely and heat gently at one corner only; strong local heating can crack glass.
- Clamp the apparatus upright on a stand so it cannot topple while hot.
- Use a single small permanganate crystal; too much dye clouds the whole loop and stains the glass. Rinse with water, and remove brown stains with a little dilute acid under supervision.
- Let the glass cool fully before emptying or washing it.
Why Choose LabEquip
This is a standard heat-transfer demonstration for middle and secondary school science, shown to the whole class or set up at a practical station. LabEquip lists it in Physics Equipments, alongside the apparatus for convection currents in gases for the air version of the same lesson. Order enquiries go through the LabEquip contact page.
Frequently Asked Questions
Why is potassium permanganate used to show the currents?
A single crystal dissolves slowly and releases an intense purple stream that follows the water’s motion without changing it noticeably. Food dye works too, but tends to spread through the water more quickly.
Why should only one corner be heated?
Heating one side makes the water there less dense than on the other side, so the loop circulates in one direction. Heating the whole bottom evenly would cause muddled upward flow on both sides.
Does convection happen in solids?
No. Convection needs the heated material to move, carrying its energy with it. In solids the particles stay in fixed positions, so heat travels only by conduction and, at surfaces, by radiation.
Why does the flow stop when the flame is removed?
Circulation is driven by the density difference between the warm and cool sides. Once heating stops, the water temperature evens out, the density difference disappears and the current dies away.
How is this related to a home hot-water system?
In a gravity hot-water system, water heated in the boiler rises to the top of the storage cylinder and cooler water sinks from the cylinder’s base back to the boiler, the same loop seen in the apparatus.
Can the apparatus be heated with something other than a flame?
Yes. Holding a beaker of hot water against one lower corner, or wrapping a warm cloth around it, produces a gentler flow that is safer for younger students, although the circulation is slower.
Last Updated: October 2026










Reviews
There are no reviews yet.