Search

In Stock

Chain Type Survey Set

Standardized Steel Survey Chain: Manufactured with uniform link lengths to ensure measurement accuracy and repeatability.

Complete Accessory Integration: Includes arrows, handles, and joining rings for full instructional surveying practice.

₹999.00

Quick Answer: The Chain Type Survey Set is the field kit for chain surveying, in which distances on the ground are measured with a linked surveying chain along straight, ranged lines. A chain survey set is used in civil engineering, geography and vocational surveying practicals to map small, fairly level areas.

How Chain Surveying Works

Chain surveying needs no angle-measuring instrument. The area is divided into a network of triangles whose sides are measured directly on the ground, because a triangle is fixed once its three sides are known. Main survey stations are marked with pegs, and the lines between them are ranged out with poles so that the chain is laid in a straight line. A check line across each triangle confirms that the measurements fit together before the party leaves the site.

Along each chain line, the positions of walls, paths, trees and buildings are picked up by offsets: short measurements at right angles to the chain, taken with a tape or offset rod from known chainages. Everything is booked in a field book, with the chain line drawn up the middle of the page and offsets sketched to either side, and the plan is plotted to scale in the drawing office afterwards.

Specifications

Method Chain surveying: linear measurement along ranged survey lines
Main item Linked surveying chain with handles at each end
Usual accessories in a chain survey set Arrows (marking pins) and ranging rods
Suited to Small, open and fairly level sites
Chain length and full contents of this set Confirm at enquiry

Taking a Chain Length Correctly

Two people work the chain. The leader walks ahead with the forward handle and a set of arrows, while the follower holds the rear handle at the station. The follower lines the leader in on the ranging rod at the far end, the chain is pulled straight and taut, and the leader pushes an arrow into the ground at the end. The follower picks up each arrow on reaching it, so the number of arrows held tells how many full chain lengths have been measured. On sloping ground the chain is held horizontal in short steps, or the slope is measured and the length reduced to a horizontal distance.

Practical Exercises

  • Surveying a school playground or campus block and plotting it to scale
  • Teaching ranging, chaining and offset techniques in civil engineering and surveying courses
  • Geography fieldwork on land use, plot boundaries and simple site plans
  • Comparing chain measurement with tape and digital distance measurement for accuracy

Care & Handling

  • Fold the chain into its usual bundle after use rather than coiling it loosely, so links do not kink.
  • Wipe off mud and dry the chain before storage to prevent rust at the joints.
  • Check the chain against a measured length, such as a test gauge or a steel tape, at intervals, since links stretch and bend in use.
  • Carry ranging rods by the middle and keep their pointed shoes clear of other people.

Why Choose LabEquip

Surveying sets are normally bought by polytechnics, engineering colleges and geography departments that run outdoor practicals with groups of three or four students. LabEquip lists this set within Physics Equipments. Tell us how many groups you need to equip, and we will confirm the chain and accessories, via LabEquip enquiries.

Frequently Asked Questions

What is the difference between a surveying chain and a tape?

A chain is made of linked steel wire pieces, so it is rugged and easy to repair in the field, but it is heavier and sags more. A steel or fibreglass tape is lighter and reads more finely. Chains remain common for training because they teach ranging and chaining discipline.

Why are survey lines arranged as triangles?

Because a triangle’s shape is fixed once all three sides are measured, a network of triangles can be plotted using lengths alone. Well-conditioned triangles, with no angle much smaller than about 30 degrees, plot most reliably.

What are arrows used for?

Arrows are steel marking pins pushed into the ground at the end of each chain length. They mark where the next length starts and act as a tally: the follower collects them, so the count in hand shows how many full lengths have been measured.

How is the chain kept in a straight line?

By ranging. Ranging rods are set up at each end of the line, and the follower sights from behind the rear rod and signals the leader left or right until the forward end of the chain lies exactly in line.

How do I correct for a sloping site?

Either measure in short horizontal steps, holding the chain level and dropping a plumb point to the ground, or measure along the slope and multiply by the cosine of the slope angle to obtain the horizontal distance.

Why must the chain be tested regularly?

Repeated pulling stretches the connecting rings and bends links, making the chain longer than its nominal length. Every distance measured with it then comes out too short, so the chain is compared with a standard length and adjusted, or the error is corrected.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)