Search

In Stock

Weight Set 500g (10 Weights for Balance)

Total calibrated mass of 500 grams divided into 10 standardized units, enabling incremental loading

Uniform-density metal construction with consistent tolerances, ensuring reliable balance calibration

₹1,420.00

Quick Answer: The Weight Set 500g (10 Weights for Balance) is a boxed set of ten standard masses for use with a physical, beam or common balance, making up a 500g weight set. Students place the weights on the balance pan to measure the mass of objects by comparison and to check balances and spring scales.

Weighing by Comparison

A beam balance compares masses directly. The object goes on the left pan and weights are added to the right until the beam rests level, at which point the object’s mass equals the total of the weights. Because the comparison happens under the same gravity on both sides, the result is a true mass, unlike a spring balance, which measures weight and would read differently on another planet.

Good technique starts with the largest weight that does not overbalance the pan and works downward, adding and removing pieces systematically until the beam swings evenly about the centre mark. The denominations in a ten-piece set are chosen so that most totals up to the set’s capacity can be built; the exact pieces in this set should be confirmed when ordering.

Accuracy Depends on Handling

Weights are made to a stated mass, and anything that adds or removes material changes it. Fingers leave moisture and oils that build up and corrode metal surfaces over time, so weights are lifted with the forceps supplied in most sets, or with a clean cloth. Dropping a weight can chip it and reduce its mass. Each weight goes back into its own recess in the box after use, which keeps the set complete and makes a missing piece obvious.

For a balance whose two arms may not be exactly equal, the method of double weighing gives a better result: weigh the object in each pan in turn and take the geometric mean of the two readings.

Uses in the Laboratory

  • Finding the mass of objects on a physical or beam balance
  • Checking the calibration of spring balances and newton meters
  • Loading a metre rule in experiments on the principle of moments
  • Teaching the difference between mass and weight

Specifications

Set 10 weights
Set size 500 g (from the title)
Used with Physical, beam or common balance
Handling Forceps or cloth, never bare fingers
Denominations, material and box Confirm at enquiry

Care & Handling

  • Lift weights with forceps or a clean cloth, never with bare fingers.
  • Return each weight to its own place in the box straight after use.
  • Keep the set dry and away from chemical fumes that can tarnish the metal.
  • Never use weights as hammers, paperweights or stops, which damages their surfaces.

Why Choose LabEquip

Physics laboratories need at least one weight set per balance, and this set is sized for the school-level weighing in most mechanics practicals. LabEquip lists it among its physics equipment; a smaller 100 g physical weight box is also listed for lighter weighing, and set details can be confirmed through the contact page.

Frequently Asked Questions

Why should weights be handled with forceps?

Skin leaves moisture and oils that build up on the metal and slowly corrode it, changing the mass. Forceps or a clean cloth keep the weights accurate for longer.

What is the difference between mass and weight in weighing?

A beam balance compares masses, so its result is the same anywhere. A spring balance measures weight, the force of gravity on the mass, which depends on where it is used.

How should weights be added during weighing?

Start with the largest weight that does not overbalance the pan, then work downward through the set, keeping or removing each piece until the beam balances.

What is double weighing?

The object is weighed first in the left pan and then in the right. Taking the geometric mean of the two results cancels the error from balance arms of slightly unequal length.

Can the weights be used to check a spring balance?

Yes. Hang known combinations of weights from the spring balance and compare its readings with the masses used, converting to newtons where the scale is in force units.

How should a weight set be stored?

In its box with each weight in its own place, closed and kept dry, away from chemical fumes and direct sunlight.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)