Search

In Stock

Pocket Magnifier, Folding Type, High Power, 10X

Aplanatic Optical Grade Lens: Features a precision-ground biconvex lens designed to maximize edge-to-edge sharpness while minimizing chromatic aberration during high-resolution specimen observation.

Full-Enclosure Protective Swing-Case: Equipped with a ruggedized, 360-degree pivoting housing that serves as both a dust-proof shield and an ergonomic handle for stabilized manual inspection in the field.

₹320.00

Quick Answer: The Pocket Magnifier, Folding Type, High Power, 10X is a high power folding magnifier: a short-focus convex lens rated at ten times magnification that swings into its own case when closed. In the physics laboratory it works as a simple microscope for reading fine scales and verniers, and it is a standard hand lens for close inspection of specimens.

A Simple Microscope That Folds Away

A lens used as a simple microscope lets the eye look at an object from much closer than its unaided near point, so the object fills a larger angle and looks bigger. The shorter the focal length, the closer the object can be brought and the higher the magnifying power. That is why a 10X lens is small and strongly curved compared with the lens of a 4x pocket magnifier. The image it forms is virtual and upright, because the object sits just inside the focal point.

High power has a cost. The field of view is small and the depth of focus shallow, so only a thin slice of an uneven object is sharp at one time. Hold the lens close to the eye, bring the object towards it until the detail snaps into focus, and brace the hands against each other or against the bench to stop the image shaking.

In practical classes this lens earns its place on the bench. It makes the coinciding line of a vernier easy to judge on calipers and spectrometer circles, shows whether a slit or cross-wire is clean, and reveals kinks in a resistance wire. Where both hands are needed for the work, the watchmaker’s eye loupe is the hands-free alternative.

Bench and Field Uses

  • Reading vernier and micrometer scale coincidences in mechanics and optics practicals
  • Checking slits, cross-wires and gratings for dust or damage
  • Close study of insect parts, leaf hairs and mineral grains
  • Checking solder joints and small components in electronics kits

Specifications

Type Folding pocket magnifier
Magnification 10X, high power, as titled
Image Upright virtual image of an object just inside the focal point
Field and depth Small field of view and shallow depth of focus, as with any high-power lens
Lens diameter and case material Confirm at enquiry

Care & Handling

  • Swing the lens back into its case whenever it is not being used.
  • Wipe the lens with a lens cloth; a sleeve or tissue can carry grit.
  • Keep the magnifier out of direct sunlight on benches and windowsills, where it can focus heat.
  • Keep the pivot free of sand and dust so the lens folds smoothly.

Why Choose LabEquip

Physics and biology departments buy 10X folding magnifiers for students who need fine detail, often alongside a lower-power lens for general viewing. LabEquip lists this high power folding magnifier with its physics lab equipment, and orders for class sets go through our contact page.

Frequently Asked Questions

How is magnifying power related to focal length?

For a lens used as a simple microscope, magnifying power rises as focal length falls; it is roughly the near-point distance of the eye divided by the focal length. A 10X lens therefore has a much shorter focal length than a 4X lens.

Why must a 10X magnifier be held so close to the eye?

The strongly curved lens has a short focal length, so the object must be close to it, and the eye must be close too to take in the narrow cone of light leaving the lens. Held at arm’s length it gives a tiny, blurred view.

Can I read a vernier scale with this magnifier?

Yes. It makes the line where a vernier division meets a main-scale division much easier to judge on calipers, screw gauges and spectrometer circles. Keep your eye square to the scale to avoid parallax.

Why is the image upright and not inverted?

The object sits just inside the focal point, so the lens forms a virtual, upright, magnified image on the same side as the object. An inverted real image forms only when the object is beyond the focal point.

Why does the edge of the view look blurred?

Simple single lenses suffer from aberrations, which are most noticeable at high power and towards the edge of the field. Keep the feature of interest near the centre of the lens for the sharpest view.

How is the folding design useful?

The lens swings into its case when closed, so it is protected from scratches and dust in a pocket or kit box. Open it fully before use so the case does not cut into the field of view.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)