Quick Answer: The Water Tap, Single, Swan Neck, L Type, Euro is a one-valve Euro-pattern L type swan neck water tap whose tall neck rises vertically and then turns through a right angle, placing the outlet high over the sink so tall glassware and containers can be filled and rinsed.
Right-Angled Swan Neck, One Outlet
The L type is the angular member of the swan neck family. Instead of an arc, its neck is a straight riser with a sharp bend at the top and a short horizontal arm ending in the outlet. The result is the same as the curved type, a raised outlet with clear space below, but the squared shape suits benches fitted with other L type or square fittings.
With one valve and one outlet, this tap is the standard choice for sinks used by one person at a time: the wash-up sink in a prep room, the rinsing sink beside a titration bench, or a sink in a pharma QC lab. Filling cylinders and carboys and rinsing burettes and pipettes are the jobs it is shaped for.
Measure the tallest vessel and the sink depth before choosing, because the neck height and reach are not stated in the listing. For a curved neck see the J type single tap, and for three outlets on the same L profile see the 3 way L type tap.
Typical Jobs at the Sink
- Filling volumetric flasks and cylinders at the rinsing sink.
- Rinsing pipettes and burettes after titrations.
- Prep-room sinks where reagent bottles and carboys are filled.
- Matching an existing set of L type fittings in a lab refit.
Specifications
| Item | Single-outlet laboratory tap with swan neck |
| Neck profile | L type, straight riser with a right-angled bend |
| Style | Euro pattern |
| Valve | One valve, one outlet |
| Typical site | Wash-up, rinsing and prep-room sinks |
| Neck height, reach and thread | Confirm at enquiry |
Care & Handling
- Keep the outlet over the centre of the bowl when filling, so the stream does not splash onto the bench.
- Wipe the straight sections with a damp cloth; residues show readily at the bend.
- Replace the washer or cartridge when the tap no longer closes fully.
- Avoid using the neck as a hanger for tubing or cloths.
Why Choose LabEquip
Lab planners who want a squared, consistent look across a new lab choose L type swan necks throughout. LabEquip lists this single tap in General Lab Products; send the sink depth and your tallest vessel through the contact page to match the neck height.
Frequently Asked Questions
Why is it called an L type swan neck?
Because the neck forms an L: it rises straight up and then turns through a right angle to the outlet. It gives the same high outlet as a curved swan neck but with a squared profile.
What can be filled under this tap?
Tall items such as measuring cylinders, carboys, aspirator bottles and buckets, provided they are shorter than the space under the outlet. Measure that space against your tallest vessel.
Is this tap suited to hot water?
It is a single-supply tap, normally connected to cold water. Where warm water is needed at a sink, a hot and cold mixture tap is the right fitting.
How is a single swan neck tap mounted?
It is normally fixed through a hole in the sink deck or the bench behind the sink and secured with a backnut underneath, with the supply connected to its tail.
Can tubing be run from the swan neck outlet?
Some swan neck outlets accept tubing, but a tall neck is awkward for long tubing runs. For condensers and filter pumps, a bench tap with low nozzle outlets is easier to use.
Why does my tap still drip after closing?
A worn washer, seal or ceramic cartridge is the usual cause. Isolate the supply, replace the worn part, and avoid overtightening the handle, which only speeds wear.
Last Updated: September 2026










Reviews
There are no reviews yet.