Specifications:

• Tensile Strength Tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. 
• These properties very often play the major role in determining the suitability of any raw material for any specific application. 
• Range: 250 Kg with 0.1 kg least count digital display
• Elongations: Up to 900 mm X 0.1 mm least count digital display
• Motor: ½ Hp, 1425 rpm, 220 V AC single phase induction motor

Contact Science Lab for your Educational School Science Lab Equipments. We are best maths lab equipments manufacturers, maths lab kit india, maths lab kit suppliers, maths lab kits manufacturers, metal testing equipments, physics lab educational equipments.

Description:

• The whole weight of the tester is 50% less than the traditional dead weights type tester.
• Test load selection by keyboard and LCD screen.
• Fully automatic test cycles. 
• This greatly improves reproducibility of test results since operator influence is eliminated.
• Selectable dwell times by screen. 
• The indenter, load, and other test information are shown clearly on the large LCD screen.
• The Brinell hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. 

Specifications:

• Direct digital reading.
• Engineered to obtain highly sensitive and accurate readings.
• Measuring Range: 8-650HBW
• Load dwell duration: 2s?99s, can be set and stored
• Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
• Measuring range: 8-650HBW
• Magnification of the microscope: 20X
• Power supply: 220/110 V, 50/60 Hz, 4A
• Max measurable height: 230 mm
• Max measurable depth: 140 mm
• Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000
• Resolution capability of the microscope: 0.005mm
• Dimension: L x W x H : 530 X260 X750 mm
• Weight: 110Kg

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific laboratory equipments manufacturer, scientific laboratory equipments supplier, technical educational equipment exporter, technical educational equipment manufacturer, technical educational equipment supplier, technical educational equipments exporter.

Main Features:

• Automatically clearing: test force, displacement, according to the needs to be cleared at any time.
• Automatic shifting: automatic switching the appropriate range to ensure accuracy load.
• Description:
• Automatic calibration: system can automatically realize the accuracy of the calibration value 
• Control method:You can achieve a variety of control method, test force, test speed, displacement, etc. 
• Setting the spring remaining height of the spring, detect the spring test force P. 
• Setting max10 detection points.
• Can set the pre-compression height of the pre-compressed spring, the number of pre-compression can be arbitrarily set.
• The deformation caused by the sensor and stiffness of the machine does not affect the accuracy of displacement.
• The detection of the spring deformation is in contact with the work pressure plate shall prevail, then the test The deformation caused by the sensor can be compensated. 

Technical Specification:

• Max test force(N): 10kN, 20kN, 30kN, 50kN, 100kN, 200kN, 300kN
• Speed error: ≤±1%
• Test accuracy: 1 class
• Structure: Four columns floor type
• Control method: automatic control 
• Test force value relative error: ≤±1%
• Displacement value relative error: ≤±1%
• Power supply: AC220V±10%,50Hz
• Speed adjust range: 0.05-300mm/min     
• Effective tensile space: 800    
• Effective compression space: 700
• Pressure plate size: 400, 500, 550
• Pressure plate diameter: 110mm
• Displacement resolution: 0.01mm
• Deformation value relative error: ≤±(50+0.15L)um

Contact Science Lab for your Educational School Science Lab Equipments. We are best school lab equipment supplier, school lab equipments, school lab equipments export, school lab equipments exporter, school lab equipments manufacturers, school lab equipments manufacturers in india.

Specification:

• This simple machine uses specimens of lead and different plastics which creep significantly at room temperature and under low loads. 
• Its main part is a simple lever (load beam) with a mechanical advantage of 8:1.
• The load beam gives a steady and uniform tensile load. 
• For effect-of-temperature tests, the student freezes or heats a cool-pack and places it next to the specimen. 
• They then fit the transparent enclosure to preserve the temperature around the specimen during the test. 
• A digital indicator measures the extension (creep) of the specimen under load. 
• To ensure correct loading of the specimen, the load beam has a ball-bearing pivot. 
• To apply a load, students add weights to a weight hanger and measure time and the creep. 

Description:

• Easy operation and reliable performance,
• It is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.
• This machine is equipped with cooling system that can cool down the specimen during pre-grinding so as to prevent overheating and damaging the metallographic structure.
• After mounting, the specimen is wet ground to reveal the surface of the metal. 
• The specimen is successively ground with finer and finer abrasive media. 
• Silicon carbide abrasive paper was the first method of grinding and is still used today.

Technical Specification:

• Grinding/polishing disc diameter: Dia 203mm
• Rotation speed: 150rpm and 300rpm
• Input voltage: AC380V/50Hz/3Ph
• Grinding/Polishing disc control: Single
• Input power: 370W
• Dimension: 740 x 400 x 310 mm
• Weight: 30kg

Features:

• Easy to use and service.
• Offering water cooled grinding.
• Easy to progress and change abrasive rolls.
• Reliable and robust design.
• The machine is manufactured from Stainless steel with a cast aluminum base.  
• Hard anodized rollers with paper support plates for long life of the machine.

Specification:

• Cooling rinse system: Water
• Dimension: 565x 535 x 200 mm
• Weight: 25kg
• Grinding stations: 240, 360, 600, 800 and 1200 grit silicon carbide rolls
• Roll sizes: 3-7/16-inch width x 60 feet length with 1 -inch core
• Construction: Aluminum casting and stainless steel, Hard coat anodized rollers and paper support plates.

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational equipments manufacturers, technical educational equipments manufacturer, technical educational equipments supplier, technical educational instruments, technical educational instruments exporter, technical educational instruments manufacturer, vocational training lab instruments exporter.

Features:

• This cutting machine is composed of main unit, electric control box, cutting room, motor, cooling system, cutting grinding wheel and other parts.
• It comes with a cooling system to prevent overheating and burning during the cutting process.
• It can cut diameter of 80mm within the round workpiece, but also can cut rectangular specimens within the cutting of hight 70mm, depth 100mm.
• Cutting speed can be set in accordance with the different specimen so as to improve the quality of cutting samples.
• Also the operator can choose cutting style in manual and automatic. 
• It is more convenient for user to use because of the large cutting chamber and mean while it is s one of the sample preparation equipment of colleges and universities, factories and enterprises for metallographic test.

Contact Science Lab for your Educational School Science Lab Equipments. We are best scientific educational lab equipments, scientific equipments manufacturers, scientific lab equipment manufacturers, scientific lab plasticware, scientific laboratory equipment manufacturer, scientific laboratory equipment supplier.

Features:

• Available in 1100°C and 1400°C temperature.
• Programmable temperature controller.
• Rugged construction for long run.
• Fitted with safety devices.
• Uniform heating rate.

Specification:

• Max temperature: 1100°C, 1400°C
• Continuous operating temp.: 1000°C, 1300°C
• Heating wire: Silicon carbide (Sic) rods
• Thermocouple: K Type, R Type
• Exterior MOC: Mild steel powder coated    
• Insulation: Ceramic fiber blanket
• Temperature controller: PID controller with SCR power control
• Chamber MOC: Ceramic fiber board, Ceramic Zirconium board
• Power supply: 220 Volts 50Hz, 3 Phase 440 Volts 50Hz

Dimensions And Capacity:

• 300 x 300 x 457mm, 42 liters volume
• 300 x 300 x 609 mm, 56 liters volume

Contact Science Lab for your Educational School Science Lab Equipments. We are best technical educational instruments supplier, technical institute lab equipments, technical lab equipments manufacturers, top lab equipments manufacturers, tvet lab equipment manufactruers, vocational training lab equipments exporter, vocational training lab equipments manufacturers.