Search

In Stock

Young’s Modulus Apparatus (Searle’s Pattern)

High-Precision Metrology: Features a dual-frame assembly equipped with a high-resolution micrometer screw head calibrated to 0.01mm increments for detecting the slightest variations in wire elongation.

Optimized Thermal Compensation: Designed with two parallel metallic frames and a ceiling bracket to support a reference wire, effectively neutralizing experimental errors caused by ambient temperature fluctuations.

$20.94

Quick Answer: The Young’s Modulus Apparatus (Searle’s Pattern) measures the Young’s modulus of a metal wire from its stretch under known loads. In Searle’s apparatus two identical wires hang from one support, and a spirit level bridging their frames, together with a micrometer screw on one side, detects the tiny extension of the loaded wire.

Inside Searle’s Apparatus

Searle’s design uses two wires of the same material and length, hung side by side from a rigid beam. Each carries a frame at its lower end. The reference wire supports a constant weight that keeps it taut, while the experimental wire carries a hanger for slotted weights. A spirit level is hinged to one frame and rests on the tip of a micrometer screw mounted on the other.

When load is added, the experimental wire stretches and the bubble moves off centre. Turning the micrometer until the level is restored gives the extension directly from the screw readings. Because both wires hang from the same support and share the same surroundings, any sag of the beam or change in room temperature affects both equally and cancels out, which is the main advantage of the twin-wire layout.

Young’s modulus is then Y = MgL/(πr²l), with M the added mass, L the original length, r the wire radius and l the extension. The radius is measured at several points along the wire with a micrometer screw gauge, and L with a metre rule. The vernier-type Young’s modulus apparatus keeps the same pair of wires but reads the extension on a vernier scale instead of a level and micrometer.

Specifications

Pattern Searle’s two-wire apparatus
Extension reading Spirit level with micrometer screw
Wires Reference wire and experimental wire of the same material
Loading Hanger with slotted weights on the experimental wire
Result Young’s modulus of the wire material
Wire material and length, weights and support supplied Confirm at enquiry

Practical Work

  • Determining Young’s modulus of a steel or brass wire in the Class XI practical
  • Plotting a load–extension graph and identifying the straight-line (Hooke’s law) region
  • Comparing the stiffness of wires made of different metals
  • Checking that loading and unloading readings agree, showing the wire stayed within its elastic limit

Care & Handling

  • Hang the apparatus from a rigid wall bracket or beam; a flexible support adds error even with the reference wire.
  • Apply a small initial load to pull out kinks before taking the zero reading.
  • Add and remove slotted weights gently, and wait a minute for the wire to settle before re-levelling.
  • Never load beyond the elastic range of the wire; a permanently stretched wire must be replaced.
  • Approach the level position from the same direction each time to avoid backlash in the micrometer screw.

Why Choose LabEquip

Physics departments setting up the Young’s modulus practical for senior secondary and college classes choose the Searle’s pattern because the level-and-micrometer method shows very small extensions clearly. Browse related items in Physics Equipments or contact LabEquip to confirm the wires and weights included.

Frequently Asked Questions

Why does Searle’s apparatus use two wires?

The second, reference wire hangs from the same support and carries a constant load. If the support sags or the room warms up, both wires move together, so only the true extension of the loaded wire is recorded by the level and micrometer.

Why is a small initial load applied before the first reading?

A new wire is rarely perfectly straight. A small initial load pulls out kinks and bends, so that later extensions come from stretching the metal, not from straightening the wire.

How is the extension read on this apparatus?

After each load is added, the micrometer screw is turned until the spirit level bubble is central again. The difference between this reading and the zero reading is the extension of the experimental wire.

What happens if the wire goes past its elastic limit?

It no longer returns to its original length when unloaded, and the load–extension graph stops being a straight line. Readings beyond that point cannot be used for Young’s modulus, and the wire should be replaced.

Why must the wire diameter be measured at several places?

The radius enters the formula as a square, so a small percentage error in diameter produces twice that percentage error in Young’s modulus. Readings at several points and in two perpendicular directions average out any variation along the wire.

How does the Searle’s pattern differ from the vernier type?

Both stretch a loaded wire beside a reference wire. The Searle’s pattern detects extension with a spirit level and micrometer screw, while the vernier type reads it from a vernier sliding against a main scale. The level-and-micrometer method is usually chosen when very small extensions must be resolved.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)