Search

In Stock

Young’s Double Slit

Micro-Machined Lithographic Apertures: Features dual parallel slits with micron-level calibrated widths and center-to-center separation, engineered to produce high-contrast interference fringes when used with monochromatic laser or sodium light sources.

High-Opacity Vacuum-Deposited Coating: Utilizes an industrial-grade metallic layer on an optical glass carrier, ensuring absolute opacity and zero light leakage to maintain mathematically accurate fringe spacing during quantitative spatial analysis.

₹445.00

Quick Answer: The Young’s Double Slit is a pair of closely spaced, parallel narrow slits used to repeat Thomas Young’s interference experiment: light passing through both slits overlaps to form a pattern of equally spaced bright and dark fringes. Measuring the fringe width with a Young’s double slit gives the wavelength of the light used.

Young’s Experiment Step by Step

The two slits are lit by the same wavefront, so they behave as coherent sources with a fixed phase relationship. Where the paths from the two slits to a point on the screen differ by a whole number of wavelengths, the waves arrive in step and give a bright fringe; where they differ by an odd number of half wavelengths, they cancel and give a dark fringe.

The fringe width β, the distance between neighbouring bright fringes, equals λD/d, where D is the slit-to-screen distance and d the separation of the slits. With a low-power laser, the double slit on a stand and a screen across the room, students measure across ten or more fringes, divide by their number and calculate the wavelength. With a sodium lamp, a narrow source slit goes in front of the lamp and the fringes are viewed through an eyepiece or measuring microscope.

The pattern responds to every variable. Moving the screen back widens the fringes; red light gives wider fringes than green; covering one slit makes the fringes vanish, leaving only the broad single-slit pattern. The single, double and adjustable slits extend these investigations, and the diffraction grating slide shows what happens when many slits replace two. Slit width, separation and mount should be confirmed when ordering.

Specifications

Element Two parallel narrow slits, as titled
Pattern Equally spaced interference fringes
Relation Fringe width β = λD/d
Light source Laser, or a monochromatic lamp with a source slit
Slit width, separation and mount Confirm at enquiry

Care & Handling

  • Handle the slide by its mount and never touch the slit area.
  • Remove dust with a hand blower; do not wipe the slits.
  • Keep laser beams below eye level and block them with a screen at the end of their path.
  • Store the slit in its case in a dry place.

Applications

  • Measuring the wavelength of laser or sodium light
  • Investigating how fringe width depends on screen distance and slit separation
  • Demonstrating the wave nature of light
  • Comparing two-slit fringes with the sharper maxima of a grating

Why Choose LabEquip

Senior secondary and college physics classes measure wavelength with Young’s double slit as a standard wave-optics practical, so departments keep one per laser station. LabEquip lists it with its physics lab equipment; send station numbers through the contact page.

Frequently Asked Questions

Why are two slits used rather than two separate lamps?

Two separate lamps emit light with random, unrelated phases, so any fringes shift too fast to see. Two slits lit by the same source act as coherent sources with a fixed phase relationship, so the pattern is steady.

What happens if one slit is covered?

The interference fringes disappear and the screen shows only the broader single-slit diffraction pattern of the open slit. This shows that the fringes need light from both slits.

How does fringe width change with slit separation?

Fringe width is inversely proportional to the slit separation: slits closer together give wider fringes, and slits further apart give finer ones.

Why measure across several fringes instead of one?

Single fringes are narrow, so measuring across ten or more and dividing by their number reduces the percentage error in the fringe width.

Is a laser needed?

A laser is the most convenient source because its light is bright, of one wavelength and coherent across both slits. A sodium lamp with a narrow source slit also works, viewed through an eyepiece.

What safety precautions apply when using a laser?

Use a low-power laser, never look into the beam or its mirror-like reflections, keep the beam below eye level and stop it with a screen at the end of its path.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)