Search

In Stock

Wheel And Axle, On Stand

Multi-Step Differential System: Features a robust, tiered wheel assembly with four distinct grooves (diameters ranging from 50mm to 150mm), allowing for the calculation of multiple torque ratios on a single axis.

Low-Friction Support Matrix: Integrated with precision ball bearings and a heavy-duty, powder-coated cast iron frame, ensuring minimal rotational resistance for highly accurate empirical data collection.

₹585.00

Quick Answer: The Wheel And Axle, On Stand is a simple machine in which a large wheel and a smaller axle turn together on one shaft carried by a stand, with the load hung from a cord on the axle and the effort applied through a cord on the wheel. Students use the wheel and axle to measure mechanical advantage, velocity ratio and efficiency.

Velocity Ratio and Mechanical Advantage

Because the wheel and the axle are fixed together, one turn of the shaft moves the effort cord through 2πR on the wheel and the load cord through 2πr on the axle, where R and r are their radii. The velocity ratio, the distance moved by the effort divided by the distance moved by the load, is therefore R/r. It depends only on the dimensions and stays the same whatever load is lifted.

The mechanical advantage, load divided by effort, would equal R/r for a frictionless machine. In practice friction at the bearings and the stiffness of the cords mean that a little more effort is always needed, so the measured mechanical advantage is smaller than the velocity ratio and the efficiency, MA/VR, is below 100 percent. Plotting effort against load gives a straight line that does not pass through the origin; its intercept is the effort needed just to overcome friction, and its equation E = aL + b is called the law of the machine.

Efficiency rises with load, because the friction effort becomes a smaller share of the total. Calculating efficiency at each load shows it approaching, but never exceeding, the limiting value 1/(a × VR) set by the law of the machine.

Care & Handling

  • Wind the effort and load cords in opposite directions, so that lowering the effort raises the load.
  • Keep the bearings clean and lightly oiled; dirty bearings raise the friction intercept and lower the efficiency.
  • Lower loads by hand after each reading rather than letting them fall back and spin the wheel.
  • Clamp the stand to the bench when heavy loads are used, so the apparatus cannot tip.

Applications

  • Determining velocity ratio from the radii and checking it by measuring the distances moved by effort and load
  • Finding mechanical advantage and efficiency at a series of loads
  • Plotting effort against load to obtain the law of the machine
  • Relating the machine to winches, steering wheels, screwdrivers and windlasses
  • Comparing this machine with pulley systems and levers as force multipliers

Specifications

Machine Wheel and axle fixed on one shaft, carried on a stand
Effort Applied through a cord wound on the wheel, radius R
Load Hung from a cord wound on the axle, radius r
Velocity ratio R/r
Wheel diameter, axle diameter, hangers and weights supplied Confirm at enquiry

Why Choose LabEquip

Schools teaching simple machines use the wheel and axle on stand next to pulley blocks and levers in one practical session. A mechanical pulley working model makes a good companion, and both belong to LabEquip’s mechanics lab equipment. Use the contact page to confirm sizes and accessories.

Frequently Asked Questions

What sets the velocity ratio of this machine?

It is the radius of the wheel divided by the radius of the axle. If the wheel is four times wider than the axle, the effort moves four times as far as the load, and the velocity ratio is 4.

Why is the mechanical advantage less than the velocity ratio?

Some effort is used to overcome friction in the bearings and to bend the cords around the wheel and the axle. The load lifted is therefore less than the ideal value of R/r times the effort.

How do I measure the effort accurately?

Add small masses to the effort hanger until the load rises slowly at a steady speed after a gentle start. The effort that keeps the load moving gives more consistent values than the effort that just starts it.

What is the law of the machine?

It is the straight-line relation between effort and load, E = aL + b, found by plotting measured efforts against loads. The constant b is the effort lost to friction with no load, and a depends on the velocity ratio and on friction.

Does efficiency stay the same at all loads?

No. With light loads, friction takes up a large share of the effort and efficiency is low. As the load increases, efficiency rises towards a limiting value set by the law of the machine.

Where are wheels and axles found in daily life?

Door knobs, screwdrivers, steering wheels, winding handles on wells and the pedals and chainwheel of a bicycle all use a larger radius for the effort and a smaller one for the load, or the reverse when speed is wanted.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)