Search

In Stock

Viscosity Apparatus Stokes Method

Precision Borosilicate Glass Tube: Features a 100cm tall, wide-bore graduated glass cylinder with a heavy-duty stable base, ensuring parallax-free observation and sufficient fall time for accurate terminal velocity calculations.

Calibrated Steel Sphere Set: Includes a range of precision-ground chrome steel balls with documented diameters and densities, allowing for the systematic investigation of Reynolds numbers and drag coefficients across different fluid media.

₹1,510.00

Quick Answer: The Viscosity Apparatus Stokes Method finds the coefficient of viscosity of a thick, transparent liquid by timing small spheres as they fall through a tall column of it. Once a sphere reaches terminal velocity, Stokes’ law links that steady speed to the liquid’s viscosity.

Terminal Velocity and Stokes’ Law

A small sphere released in a viscous liquid accelerates for a short distance, then falls at a constant terminal velocity v. At that point its weight is balanced by the upthrust of the displaced liquid together with the viscous drag 6πηrv given by Stokes’ law. Equating the forces gives η = 2r²(ρ − σ)g / 9v, where r is the radius of the sphere, ρ its density and σ the density of the liquid.

In practice the liquid stands in a tall glass tube or jar with two reference marks, the upper one far enough below the surface for the sphere to have stopped accelerating before it passes. Each ball is measured with a micrometer screw gauge, wetted with the liquid so that no air clings to it, and dropped centrally through a short guide tube. The time to fall between the marks, taken with a stop watch, gives v.

Plotting v against r² for several ball sizes gives a straight line whose slope yields η with less scatter than a single drop. A sphere falling near the wall is slowed by it, so the measured velocity needs a correction when the tube is narrow compared with the ball; dropping balls down the axis keeps that correction small. The tube length, the liquid and the ball set included are not specified in the listing title.

Where the Falling-Ball Method Is Used

  • Determining the coefficient of viscosity of glycerine in the senior secondary practical
  • Verifying that terminal velocity is proportional to the square of the sphere radius
  • Comparing the viscosities of two oils by timing identical balls in each
  • Demonstrating terminal velocity and balanced forces in a mechanics lesson

Specifications

Method Falling-sphere (Stokes’ law) method
Measured Terminal velocity between two marks, sphere radius and both densities
Typical liquids Glycerine, castor oil and other transparent viscous liquids
Typical spheres Small steel balls of more than one diameter
Tube length, liquid and ball set supplied Confirm at enquiry

Care & Handling

  • Let the liquid stand until all air bubbles have risen before timing.
  • Recover the balls with a magnet on a rod or by draining; do not reach into the tube.
  • Keep glycerine covered between sessions, since it absorbs water from the air and becomes less viscous.
  • Wipe drips from the outside of the tube so the marks are clearly visible at eye level.
  • Record the liquid temperature, as viscosity changes markedly with temperature.

Why Choose LabEquip

Class XI–XII and first-year college laboratories use this Stokes method viscosity apparatus because one practical combines force balance, terminal velocity and careful timing. LabEquip supplies it within our physics lab equipment range; ask us which tube and ball set suits your groups.

Frequently Asked Questions

What is terminal velocity in this experiment?

It is the constant speed a sphere reaches when its weight is exactly balanced by the upthrust and the viscous drag of the liquid. Stokes’ law applies only once that steady speed is reached, so the timing marks must lie below the region where the sphere is still accelerating.

Why are the steel balls wetted before dropping?

A dry ball can carry tiny air bubbles that add buoyancy and change the drag. Dipping the ball in the same liquid first removes the air film and gives a fall time that reflects the liquid’s true viscosity.

Why should the ball fall along the centre of the tube?

Near the wall the liquid cannot flow freely around the sphere, so it falls more slowly and the viscosity appears higher. Dropping the ball through a guide tube at the axis keeps it away from the wall.

Can water be tested with the Stokes method?

Not with this kind of set-up. In water a steel ball quickly reaches a speed at which the flow around it is no longer smooth, and Stokes’ law stops holding. The method suits liquids viscous enough that a small ball sinks slowly and steadily, such as glycerine or castor oil.

How does temperature affect the result?

The viscosity of oils and glycerine drops steeply as temperature rises, so the same balls fall faster on a warm day. Note the temperature with each set of readings and quote the viscosity at that temperature.

Why use balls of different sizes?

Stokes’ law predicts that terminal velocity is proportional to the square of the radius. Timing several sizes and plotting velocity against radius squared tests that prediction and gives the viscosity from the slope, which averages out errors in individual drops.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)