Search

In Stock

Universal Joint Test Bench

Banc d’essai cardan, Variable Joint Angle Adjustment (0–45°) Enables technical Evaluation of velocity ratios and the identification of non-uniform transmission peaks as a function of the joint angle.

Manual Drive with Inertial Feedback supports the physical Application of rotational dynamics principles, allowing students to visualize the fluctuating speed of a Cardan shaft in real-time.

Ruggedized Bearing Support Blocks ensure experimental Consistency by minimizing parasitic friction and axial deflection during high-cadence undergraduate laboratory rotations.

$27.64

Quick Answer: A universal joint test bench is a teaching bench that links two shafts with a universal joint, also called a Cardan or Hooke’s joint, so that rotation can be transmitted when the shafts meet at an angle. Students use the universal joint test bench to compare input and output angles and to see why a single joint gives an output speed that rises and falls twice every turn.

How a Universal Joint Works

Each shaft ends in a U-shaped yoke, and the two yokes are joined through a cross-shaped piece called the spider. The spider can pivot about both of its arms, so the joint keeps turning even when the shafts are not in line. That flexibility is why universal joints appear in vehicle drive shafts, steering columns and tractor power take-offs, where the parts they connect move relative to each other.

The Uneven Output of a Single Joint

A single universal joint passes on the same number of turns, but not at a steady rate. With the shafts at an angle β, the output speed swings between cos β and 1/cos β times the input speed, twice in every revolution. At 30 degrees that means between about 0.87 and 1.15 times the input, a fluctuation of roughly 15 % either way. On the bench, turn the input in steps of 15 degrees and read the output angle each time: the output runs ahead, falls behind and catches up again.

Engineers cancel the effect with two joints and an intermediate shaft. If both joints work at equal angles and the yokes on the intermediate shaft are lined up in the same plane, the second joint’s fluctuation exactly undoes the first, and the output turns steadily. Getting that phasing wrong doubles the fluctuation instead, an effect that a bench set up with two joints shows clearly.

Specifications

Mechanism Universal (Cardan or Hooke’s) joint linking two shafts
Function Transmits rotation between shafts meeting at an angle
Speed ratio, single joint Varies between cos β and 1/cos β, twice per turn
Readings Input and output angles compared step by step
Range of joint angle and number of joints Confirm at enquiry

Applications

  • Showing rotation carried between shafts that are out of line
  • Measuring the output angle against the input angle for a single joint
  • Demonstrating cancellation with two correctly phased joints, where two joints are fitted
  • Linking the bench to vehicle drive shafts and steering columns

Care & Handling

  • Turn the input by hand slowly when taking angle readings, so the joint does not jump.
  • Keep the spider bearings clean and lightly lubricated where the design allows.
  • Do not force the joint beyond the angle at which it binds.
  • Store the bench with the shafts in line so the joint is not left under strain.

Why Choose LabEquip

Engineering and technology teachers use a universal joint test bench because the uneven output of a single joint is surprising and easy to measure, and it explains a real design rule. LabEquip lists this bench in its physics lab equipment range alongside the rack and pinion test bench and the belts and pulleys test bench. Use the contact page to ask about joint angles and configurations.

Frequently Asked Questions

What is a universal joint?

It is a coupling that joins two shafts meeting at an angle. Two U-shaped yokes are connected by a cross-shaped spider that pivots on both arms, so rotation can pass through the bend.

Does the output shaft turn at the same speed as the input?

It makes the same number of turns, but within each turn a single joint makes the output speed up and slow down twice. The variation grows as the angle between the shafts increases.

How large is the speed variation at 30 degrees?

The output speed ranges between cos 30 degrees and 1 divided by cos 30 degrees times the input, roughly 0.87 to 1.15. That is a swing of about 15 percent either way.

How can the speed variation be cancelled?

Use two joints with an intermediate shaft, set at equal angles, with the yokes on the intermediate shaft aligned in the same plane. The second joint then reverses the fluctuation of the first.

Where are universal joints found?

In the propeller shafts of rear-wheel-drive vehicles, steering columns, tractor power take-off shafts and many machine tools where shafts cannot be kept in line.

How is the variation shown on the bench?

Turn the input shaft in equal steps, such as 15 degrees, and record the output angle each time. Plotting the difference between output and input angle against input angle shows two peaks and two dips per revolution.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)