Search

In Stock

Stirling Engine

Moteur de Stirling Features precision-lapped, low-friction power pistons housed in high-thermal-stability borosilicate glass cylinders, allowing real-time visualization of gas displacement and phase timing.

Integrated Electromechanical Interface Equipped with a built-in generator and standardized 4mm safety sockets, enabling concurrent measurement of rotational frequency and electrical output for comprehensive energy-balance calculations.

₹17,350.00

Quick Answer: This Stirling engine for thermodynamics teaching is a working hot-air engine that turns a flywheel using a temperature difference between its hot and cold sides, with the same sealed gas heated and cooled over and over. It shows how heat is converted into mechanical work and why a temperature difference is essential for any heat engine.

The Stirling Cycle

A Stirling engine contains a fixed quantity of gas, usually air, sealed inside. A displacer shuttles the gas between the hot side and the cold side, while a separate power piston is pushed out when the gas is hot and at high pressure and drawn back when it is cool and at low pressure. Because expansion happens at a higher pressure than compression, each cycle delivers net work to the flywheel.

In the ideal Stirling cycle the gas passes through four stages: heating at constant volume, expansion at constant high temperature, cooling at constant volume and compression at constant low temperature. On a pressure-volume diagram these stages enclose an area equal to the work done per cycle. Real engines round off the corners, but the diagram remains a good way to discuss where the work comes from.

Efficiency and the Temperature Difference

No heat engine working between two temperatures can beat the Carnot limit, 1 – Tc/Th, with both temperatures in kelvin. As an example, a hot side at 373 K and a cold side at 293 K give a limit of about 21 per cent, and a demonstration engine reaches only a small fraction of that. Increasing the temperature difference makes the engine run faster, and removing the heat source lets students watch it slow down and stop as the two sides approach the same temperature.

Lesson Applications

  • Demonstrating a heat engine and the need for a temperature difference
  • Discussing the Stirling cycle on a pressure-volume diagram
  • Comparing real efficiency with the Carnot limit
  • Linking to waste heat recovery and solar thermal power

Specifications

Item Stirling (hot-air) engine for demonstration
Working gas Sealed quantity of gas, typically air
Principle Stirling cycle; conversion of heat to mechanical work
Output Rotation of a flywheel
Heat source and engine type Confirm at enquiry

Care & Handling

  • Follow the instructions for the heat source supplied, and never refill a spirit burner while it is hot
  • Do not oil the pistons unless the instructions say so; many small engines are designed to run dry
  • Let the hot end cool before touching or packing the engine
  • Start the flywheel with a gentle push; forcing it can damage the linkage

Why Choose LabEquip

Physics and engineering teachers choose a Stirling engine because students can see heat become motion and can stop it simply by removing the temperature difference. It works well alongside the demonstration heat pump, which runs the same ideas in reverse, and other physics lab equipment; contact LabEquip to confirm the heat source for this model.

Frequently Asked Questions

Why does the engine need a push to start?

At rest the displacer and piston may sit where the gas does no useful work. A small push moves the mechanism into its cycle, and once the flywheel is turning its momentum carries the engine through the parts of the cycle that absorb work.

Why does it stop when both sides reach the same temperature?

Work comes from the gas expanding when hot and being compressed when cool. With no temperature difference the expansion and compression happen at the same pressure, so there is no net work to keep the flywheel turning.

Can a Stirling engine run in reverse?

Yes. If the flywheel is driven by a motor, the engine pumps heat from one side to the other and can act as a refrigerator or heat pump. This reverse use is the basis of Stirling cryocoolers.

Why is it called an external combustion engine?

The heat is supplied from outside the sealed cylinder, so fuel never mixes with the working gas. Any heat source can be used, including sunlight, hot water or waste heat, unlike a petrol engine that burns fuel inside the cylinder.

How efficient is a demonstration Stirling engine?

Far below the Carnot limit for its temperatures. Friction, heat leaking directly from hot to cold parts and imperfect regeneration absorb most of the input, which is itself a useful discussion point about real engines.

What is the role of the flywheel?

It stores rotational kinetic energy during the power stroke and returns it during the compression stroke. Without it the engine would stall at the point in each cycle where the gas has to be compressed.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)