Search

In Stock

Searle’s Surface Tension Balance

Frictionless Knife-Edge Pivot: Features a high-sensitivity balance beam mounted on a polished agate knife-edge to ensure maximum precision and minimal mechanical resistance during force measurement.

Precision Graduated Scale: Equipped with an integrated anti-parallax mirror scale and a fine-tip pointer, allowing for sub-millimeter resolution when calculating the vertical displacement of the test wire or frame.

$23.80

Quick Answer: The Searle’s Surface Tension Balance measures the surface tension of a liquid or soap film from the pull of the surface on a light frame, using a beam carried by a stretched torsion wire whose twist is read as a deflection. Small known masses calibrate the deflection in units of force.

Weighing the Pull of a Surface

Surface tension acts along every line drawn in a liquid surface. If a thin wire or frame is drawn up out of a liquid, the film clings to it on both sides and pulls down with a force 2TL, where L is the length of wire in contact with the surface. Measuring that small force gives T directly. Searle’s balance does this with a torsion arrangement rather than a beam resting on a knife-edge.

In the usual design a light beam is fixed to a horizontal wire stretched between supports on a levelling stand, so the beam can turn only by twisting the wire. The frame hangs from the beam, and the beam’s deflection is read against a scale. Small known masses are hung first to calibrate the deflection; then the liquid is raised to the frame, the film is formed, and the deflection just before the film breaks is converted into a force using the calibration.

The method suits soap films, which are awkward to study with capillary tubes, as well as clean liquids such as water. The frames and accessories supplied with this listing should be confirmed. A rising table is a convenient way to raise the liquid to the frame, and Jaeger’s apparatus gives an independent value by another method.

Specifications

Type Torsion-type surface tension balance (Searle’s pattern)
Principle Pull of a liquid film on a frame twists a stretched wire
Calibration Deflection produced by small known masses
Suits Soap films and clean liquids
Frames and accessories supplied Confirm at enquiry

Applications

  • Measuring the surface tension of soap solution
  • Measuring the surface tension of water and comparing it with capillary rise results
  • Showing how detergent concentration lowers surface tension
  • Demonstrating that a film exerts a measurable force along its edge

Care & Handling

  • Level the stand before each session and recheck the zero of the beam.
  • Calibrate with known masses every time the balance is set up.
  • Work away from draughts and fans, which move the light frame.
  • Never hang loads heavier than the calibration masses, which can overstrain the torsion wire.

Why Choose LabEquip

Physics teachers buy Searle’s balance for surface tension practicals on soap films, where a direct force measurement makes the idea of tension in a surface concrete. LabEquip lists it in Physics Equipments; confirm the frames supplied through our contact page.

Frequently Asked Questions

Why does the force involve twice the length of the wire?

A film has two surfaces, front and back, and each pulls along the length of the wire. The total force is therefore twice the surface tension times the length in contact.

How is the balance calibrated?

Hang small known masses from the beam in turn and record the deflection for each. A graph of force against deflection then converts the deflection produced by the film into a force.

Why is a torsion wire used instead of a knife-edge?

A stretched wire has no friction at its pivot, and its twist is proportional to the couple applied, so very small forces give a steady, repeatable deflection. That suits the tiny forces produced by surface films.

Can it measure the surface tension of soap solution?

Yes. Soap films are the classic subject for this balance, because a film forms readily across a wire frame and the effect of different soap concentrations can be compared.

Why must draughts be avoided?

The forces involved are very small, so air currents move the frame and make the deflection unsteady. Work away from fans and open windows, and shield the balance if necessary.

How should the frame be cleaned?

Wash it in warm water with a little detergent, rinse well with distilled water and handle it by its hook only. Grease from fingers changes how the liquid wets the frame and lowers the reading.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)