Quick Answer: Slotted masses are flat, disc-shaped laboratory masses with a radial notch cut from the edge to the centre. The notch lets slotted masses slide sideways onto the rod of a mass hanger, so the load can be increased or reduced without unhooking the hanger from a spring or string.
What the Notch Is For
A plain disc with a central hole would have to be lifted over the top of the hanger rod, which means unhooking the hanger and disturbing the experiment. The notch removes that step: each disc slides on from the side and drops onto the stack. In a Hooke’s law experiment the spring stays loaded throughout, so readings are taken under consistent conditions.
Stacking also keeps the load compact and centred under the hook, so a hanger with several discs hangs vertically and does not swing more than a single mass would.
Building Loads and Their Uncertainty
Any total within the set’s range is built by stacking. Each piece carries a small manufacturing tolerance, and when pieces are added their uncertainties add too, so a stack of many small discs is less certain than a single larger piece of the same total. For careful work, weigh each disc and the hanger on a balance once, label them, and use the measured values.
In a friction practical the same discs ride on top of a wooden block instead of a hanger. Each disc added raises the normal reaction, and the force needed to slide the block rises in proportion, giving the coefficient of friction as the gradient of friction force against normal force.
Applications
- Loading springs in steps for Hooke’s law graphs
- Varying the hanging force in pulley and dynamics practicals
- Increasing the normal reaction on a block in friction experiments
- Building loads on levers and moments beams
Specifications
| Product | Slotted laboratory masses with side notch |
| Form | Flat discs notched from the edge to the centre |
| Used with | Mass hanger with central rod |
| Function | Loads changed without unhooking the hanger |
| Values, number of pieces and material | Confirm at enquiry |
Care & Handling
- Slide discs on and off gently; dropping them onto a loaded spring jolts it
- Turn successive notches away from each other so the stack cannot slip off
- Keep the discs dry and clean, and store them stacked on their hanger or in a rack
- Weigh pieces occasionally; chipped or corroded discs no longer match their marked value
Why Choose LabEquip
These notched discs are among the items physics labs reorder most often, as every spring, pulley and friction station needs a set. LabEquip supplies them with the matching mass hanger plate and other physics lab equipment; tell LabEquip your station count for matched sets.
Frequently Asked Questions
What is the notch for?
It lets each disc slide onto the hanger rod from the side. The hanger can stay hooked onto the spring or string while the load is changed.
How are slotted masses used in a friction practical?
Stack them on a block and pull it with a force meter at steady speed. Each added disc increases the normal reaction, and the gradient of friction force against normal reaction gives the coefficient of friction.
How should a stack be loaded onto a spring?
Add one disc at a time, lowering it gently, and wait for the spring to stop bouncing before reading. Sudden loading can overshoot and stretch the spring beyond its elastic limit.
How is the total uncertainty of a stack estimated?
Add the tolerances of the individual pieces and the hanger. For the most precise work, weigh each piece on a balance and use the measured masses instead.
What is the difference between slotted and hooked masses?
Slotted masses stack on a single hanger and are changed without unhooking it. Hooked masses each have their own hook and are hung individually or chained together.
Will these masses fit my existing hanger?
They fit a hanger whose rod passes through the notch and centre hole. The values, number of pieces and notch size can be confirmed at enquiry to match your hangers.
Last Updated: October 2026










Reviews
There are no reviews yet.