Quick Answer: This stainless steel platform scale is a weighing platform made in stainless steel 304, used where hygiene and corrosion resistance matter, such as food, dairy and pharmaceutical handling. It can be cleaned often without the rusting that affects painted mild steel.
Why Grade 304 Stainless Steel
Type 304 is the most widely used austenitic stainless steel, with roughly 18 percent chromium and 8 percent nickel, which is why it is often called 18/8. The chromium forms a thin, self-renewing oxide film that resists rust, and the smooth surface is easy to clean, so 304 is common in food contact equipment, kitchen fittings and process plants.
Grade 304 has limits. Chloride-rich conditions, such as brine, seawater and some bleach-based cleaners, can cause pitting, against which the molybdenum-bearing grade 316 is more resistant. In a platform scale, stainless construction may cover the top plate only or the whole frame, and the load cell and indicator may be other materials; the extent of stainless parts on this model should be confirmed at enquiry.
Applications
- Raw material weighing in pharmaceutical and food production
- Dairy and bakery ingredient weighing
- Hospital kitchens and central stores
- Laboratory weighing of bulk materials where corrosion is a concern
Hygienic Weighing
Stainless platforms are chosen where products are weighed unpacked or in open containers and where cleaning is frequent: raw materials in pharmaceutical dispensing areas, milk cans in dairies, dough and ingredients in bakeries, and crates of fish or meat in processing plants. The smooth top plate can be scrubbed and sanitised, and on designs with a lift-off top plate the area beneath can be cleaned as well.
Specifications
| Type | Platform scale |
| Material (as titled) | Stainless steel 304 |
| Material property | Chromium-nickel austenitic steel with good general corrosion resistance |
| Typical areas | Food, dairy and pharmaceutical handling |
| Stainless extent, capacity, platform size and indicator | Confirm at enquiry |
Care & Handling
- Clean with mild detergent and water, rinse and dry; avoid steel wool, which leaves iron particles that rust.
- Rinse off chloride cleaners and salt brine promptly to prevent pitting.
- Keep water out of the indicator unless it carries a water-protection rating.
- Check zero and accuracy after cleaning and after any heavy impact.
Why Choose LabEquip
Food processors, dairies, hospital kitchens and pharmaceutical stores buy stainless platforms for hygienic, easily cleaned weighing. LabEquip lists this model in Physics Equipments together with the lower-cost mild steel platform scale for dry areas; ask about materials through our contact page.
Frequently Asked Questions
Why is stainless steel 304 used for platform scales?
It resists rust in most indoor and food environments and has a smooth surface that is easy to clean and sanitise, which suits hygienic weighing.
Is grade 304 suitable for salty or brine conditions?
Chlorides can cause pitting in 304. For frequent contact with brine, seawater or chlorine cleaners, grade 316 is more resistant, so rinse 304 promptly after such exposure.
Is the whole scale stainless steel?
That depends on the design. Some scales use stainless steel for the top plate only, others for the frame too. The load cell and indicator may be made of other materials, so confirm the details for this model.
How should a stainless platform be cleaned?
Use warm water with a mild detergent and a soft brush or cloth, then rinse and dry. Avoid steel wool and abrasive pads, which scratch the surface and leave iron particles.
Can it be hosed down?
Only if the load cells, cables and indicator are protected against water. A stainless platform alone does not make the scale waterproof.
How is it different from a mild steel platform?
Mild steel is strong and lower in cost but rusts unless painted, and paint chips in use. Stainless steel resists corrosion without a coating, which suits wet and hygienic areas.
Last Updated: October 2026










Reviews
There are no reviews yet.