Search

In Stock

Parallelogram Force Apparatus

Low-Friction Precision Pulleys: Equipped with high-sensitivity, adjustable nylon pulleys and secure mounting brackets to ensure exact force vector alignment and minimize mechanical interference during measurement.

Reinforced Gravesande’s Stand Architecture: Features a heavy-gauge metal chassis with an integrated large-format drafting board, providing a stable, high-contrast surface for the geometric plotting of multi-point tension diagrams.

$9.87

Quick Answer: The Parallelogram Force Apparatus is a vertical board with a freely running pulley near each top corner, over which strings carrying weights meet a third, hanging weight at a common knot. With the knot at rest, students trace the strings onto paper and use the parallelogram force apparatus to verify that the two angled forces combine into a resultant equal and opposite to the third.

Verifying the Parallelogram Law on a Vertical Board

The parallelogram law states that if two forces acting at a point are represented in size and direction by the adjacent sides of a parallelogram, their resultant is represented by the diagonal drawn from that point. On this apparatus the two forces are the weights P and Q hanging over the pulleys, and their directions are the lines of the strings. The third weight R hangs straight down from the knot. At equilibrium, the resultant of P and Q must equal R in size and point directly opposite to it.

To test this, a sheet of paper is pinned to the board behind the strings. The position of the knot and two points under each string are marked, and the lines are drawn in. Along the two upper lines, lengths proportional to P and Q are measured from the knot using a chosen scale, such as 1 cm for each 0.1 N, and the parallelogram is completed. The diagonal from the knot should come out vertical, and its length should match R to within a few percent.

The main errors come from friction in the pulleys and parallax when marking the strings. Tapping the board helps the knot settle at its true equilibrium, and lining each string up with its reflection in a strip of plane mirror before marking removes parallax. Repeating with different weights, or pulling the knot aside and releasing it, shows that the same position is reached each time.

What the Apparatus Teaches

  • Verifying the parallelogram law of forces with three weights in equilibrium
  • Finding an unknown weight from two known weights and the directions of their strings
  • Showing that two forces at an angle have a resultant smaller than their arithmetic sum
  • Comparing graphical results with calculation using the cosine rule, R² = P² + Q² + 2PQ cos θ
  • Introducing the triangle of forces and Lami’s theorem for three concurrent forces

Care & Handling

  • Check that both pulleys of the parallelogram force apparatus spin freely before the practical; a sticking pulley is the commonest cause of poor agreement.
  • Keep the strings just clear of the board so they do not rub against the paper.
  • Use thin, strong thread and join the three strings at one small knot, since a large knot makes the meeting point uncertain.
  • Hang or stand the board vertically and fix it so it cannot tilt when weights are added.

Specifications

Apparatus Vertical board with two pulleys for three concurrent forces
Forces Two angled string tensions P and Q and a vertical weight R
Recording String lines traced on paper fixed to the board
Law tested Parallelogram law of vector addition
Board size, pulleys and weight sets supplied Confirm at enquiry

Why Choose LabEquip

Secondary school and junior college physics departments use the apparatus for the vectors practical found in most mechanics syllabi. For forces at any angle around a full circle, the universal force table is the next step. Both are in LabEquip’s physics lab equipment list, and quantities can be requested through the contact page.

Frequently Asked Questions

What does the parallelogram law of forces state?

If two forces acting at a point are drawn to scale as two adjacent sides of a parallelogram, the diagonal through that point gives their resultant in both size and direction.

Why must the knot be at rest when the strings are marked?

The law is tested for forces in equilibrium. If the knot is still moving or is held back by friction, the three forces are not balanced and the drawn parallelogram will not match the third weight.

How can pulley friction be reduced?

Use pulleys that run freely, keep them clean and lightly oiled, and tap the board gently before marking. Averaging the knot positions reached after displacing it to one side and then the other also reduces the effect of friction.

Why is a mirror strip used when marking the strings?

Looking at a string from an angle shifts its apparent position on the paper. Lining the string up with its own reflection puts the eye directly in front of it, so the marked line is where the string really is.

Can the apparatus find an unknown weight?

Yes. Hang the unknown as the third weight, record P and Q and the directions of their strings, and construct the parallelogram. The length of the diagonal, converted with the scale used, gives the unknown weight.

Is the resultant of two forces their sum?

Only when they act in the same direction. At any angle the resultant is smaller than the arithmetic sum, and it falls further as the angle between the strings widens. The apparatus makes this visible, because P plus Q always exceeds R.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
USD United States (US) dollar
Product has been added to your cart
Compare (0)