Quick Answer: Panel meters are current or voltage meters designed to be mounted through a cut-out in a front panel, with their connections at the back. In laboratories they are built into trainer boards, power supplies, demonstration units and student projects so that a reading is part of the apparatus itself.
Meters Made to Be Built In
A bench meter sits loose beside the circuit; a panel meter becomes part of an instrument. Its body passes through a hole cut in the panel, a flange or bezel rests against the front surface, and clamps or studs at the back hold it in place. The terminals are at the rear, so wiring stays hidden behind the panel and only the dial is visible.
Panel-mounting instruments are made in the same families as bench meters. Moving-coil types measure direct current or voltage with an evenly divided scale, while alternating quantities need a meter designed for AC, such as a moving-iron or rectifier type. The quantity, range, size and cut-out dimensions of the meter you need should be agreed at enquiry, since these decide whether it fits your panel and circuit.
In teaching labs, these meters let students build their own power supplies, battery chargers or trainer boards and see a proper readout on the finished unit, which links meter theory to real equipment.
Applications
- Readouts on student-built power supplies and battery chargers
- Built-in meters on electricity and electronics trainer boards
- Demonstration panels showing current in series and parallel circuits
- Replacement meters for existing laboratory apparatus
Specifications
| Type | Panel-mounting meters for current or voltage |
| Mounting | Through a cut-out, with rear clamps or studs |
| Connections | Terminals at the rear of the meter |
| Uses | Trainer boards, power supplies, demonstration panels |
| Quantity, range, size and cut-out | Confirm at enquiry |
Fitting a Panel Meter
Mark and cut the hole to the template for the meter, remove sharp edges, and fit the meter from the front before tightening the rear clamps evenly. Use insulated crimp or soldered connections on the rear terminals, observing polarity on DC meters. Any panel that carries mains wiring must be wired and checked by a competent person before use.
Care & Handling
- Tighten the rear clamps evenly; overtightening on one side can distort the case.
- Keep the rear terminals covered or enclosed so they cannot be touched during use.
- Match the meter to the circuit’s quantity and range; a DC moving-coil meter will not read AC.
- Clean the front window with a soft dry cloth.
Why Choose LabEquip
Teachers building trainer boards and technicians maintaining laboratory power supplies are the usual buyers of these built-in meters, while a portable meter covers loose bench readings. LabEquip supplies both with its physics lab equipment, and the right quantity, range and size for your panel can be worked out with our team via the contact page.
Frequently Asked Questions
What is the difference between a panel meter and a portable meter?
A panel meter is fixed into an instrument and wired from behind. A portable meter is a self-contained instrument with front terminals that can be carried to any circuit on the bench.
Can a panel meter measure AC?
Only if it is designed for AC. Moving-coil types read DC; for alternating current or voltage choose a moving-iron or rectifier-type AC meter.
How is a panel meter fixed in place?
The meter passes through a hole cut in the panel, its front flange rests on the panel surface, and clamps or nuts on studs at the back hold it firmly.
What information is needed to choose a panel meter?
You need the quantity to be measured, AC or DC, the full-scale range, the meter size and the cut-out size that suits your panel. These together decide whether a meter fits the job.
Can students fit these meters in their own projects?
Yes, for low-voltage projects such as battery-powered circuits or bench supplies, with supervision. Anything connected to the mains must be wired by a competent person.
Does a panel meter need a separate power supply?
Analogue moving-coil and moving-iron types take their energy from the circuit being measured. Some digital versions need a separate supply, which should be checked for the model chosen.
Last Updated: October 2026










Reviews
There are no reviews yet.