Search

In Stock

Modulator Demodulator Unit

Ensemble modulateur démodulateur allows users to change transmission speeds and frequencies to see how different waves behave during signal encoding and recovery stages.

Visual Signal Test Points: Built with high-quality gold-plated connectors for oscilloscopes, making it easy to see the "before" and "after" waves as they pass through the modulation process.

₹6,350.00

Quick Answer: The Modulator Demodulator Unit is a pair of modules: one imposes a low-frequency message signal on a higher-frequency carrier, and the other recovers the message from the modulated wave. Physics and electronics classes use the modulator demodulator unit with signal generators and an oscilloscope to study how radio and cable links carry information.

Why Signals Are Modulated

A voice or music signal contains low frequencies that cannot be radiated efficiently from a practical aerial, and if every station sent its audio directly they would all overlap. Modulation solves both problems: the message changes a property of a high-frequency carrier, and each transmitter uses its own carrier frequency so receivers can pick one out.

In amplitude modulation, the scheme most school modules are designed around, the carrier’s amplitude rises and falls with the message. On an oscilloscope the result looks like a fast oscillation inside an envelope that has the shape of the message. If the message is too strong, the envelope collapses to zero on its troughs, an over-modulated wave that distorts on recovery.

Recovering the Message

The demodulator module in the product photograph is the second clear housing with terminal sockets. The classic method of amplitude demodulation is envelope detection: a diode passes one half of the modulated wave, and a capacitor with a resistor smooths it so the output follows the envelope rather than each carrier cycle. The RC time constant has to be long compared with a carrier period but short compared with a message period.

A Typical Bench Sequence

  • Feeding a carrier and a message into the modulator and displaying the modulated wave
  • Measuring the modulation index from the envelope maxima and minima
  • Showing over-modulation and the distortion it causes after detection
  • Recovering the message with the demodulator and comparing it with the original

Specifications

Product Modulator Demodulator Unit: two modules
Housing Clear cases with terminal sockets, as photographed
Signals Carrier and message from external generators
Observation Dual-trace oscilloscope or data logger
Modulation schemes supported Confirm at enquiry

Care & Handling

  • Set generator outputs low before connecting and raise them gradually
  • Use screened or short leads for the carrier signal to reduce pick-up
  • Switch off generators before rewiring between the modules
  • Keep the clear housings away from solvents that can craze plastic

Why Choose LabEquip

Communication topics appear in physics and electronics syllabuses at upper-secondary and college level, and this unit gives students their own modulated signals to measure. LabEquip supplies it with accessories such as the coaxial cable adapter within its physics equipment; questions about the schemes covered can be sent through the contact page.

Frequently Asked Questions

What is amplitude modulation?

Amplitude modulation is a way of carrying a message by varying the amplitude of a high-frequency carrier in step with the message. The carrier frequency stays fixed while its strength rises and falls.

Which signals are fed to the modulator?

A carrier from one signal generator and a lower-frequency message from a second generator or an audio source. The carrier frequency should be many times higher than the message frequency.

How does the demodulator recover the message?

In envelope detection a diode lets through one half of the wave and an RC filter smooths away the carrier cycles. What remains follows the envelope, which is the original message.

What happens if the modulation depth is too high?

The envelope reaches zero and the carrier briefly disappears. The recovered signal then has its troughs clipped and sounds or looks distorted.

How is the modulation index measured?

Read the largest and smallest peak-to-peak heights of the envelope on the oscilloscope. The index is their difference divided by their sum; zero means no modulation and one means full modulation.

Why does the recovered signal look slightly jagged?

A little of the carrier survives the smoothing filter as ripple. A larger filter capacitor or resistor reduces it, but too large a time constant makes the output lag behind fast changes in the message.

Last Updated: October 2026

Reviews

There are no reviews yet.

Write a review

Back to Top
Select your currency
INR Indian rupee
Product has been added to your cart
Compare (0)