Quick Answer: The Metal Cylinders are solid cylinders of metal used in density, upthrust and specific heat capacity experiments. Their volume follows from a measured diameter and length, and their regular shape makes them easy to weigh, submerge, heat and transfer between apparatus.
Why a Cylinder Shape Suits Several Practicals
A cylinder’s volume is πr²h, so finding it gives students practice with two measurements on a vernier caliper: the outside jaws across the diameter and again along the length. Combined with mass from a balance, this gives the density, and comparing results across a set of different metals shows how strongly density depends on material.
The same metal cylinders fit neatly into a measuring cylinder or overflow can for displacement checks, and hang easily from a spring balance for upthrust measurements. In heat experiments, a cylinder is warmed in boiling water, transferred quickly to a calorimeter of cold water and the final temperature recorded; the method of mixtures then gives the specific heat capacity of the metal. A thread tied round the cylinder, or a hook if one is fitted, makes it easier to lift from the boiling water.
Sets of this kind often contain one cylinder each of several common metals turned to the same dimensions, which highlights the difference in mass for equal volume; equal-mass sets instead show differences in size. The listing title does not specify the metals, dimensions or number of pieces, so confirm the arrangement. For a simpler first density lesson the metal cubes avoid π altogether.
Experiments
- Determining the density of different metals from measured dimensions and mass
- Finding specific heat capacity by the method of mixtures
- Measuring upthrust and verifying Archimedes’ principle with a spring balance
- Practising vernier caliper readings on diameters and lengths
Specifications
| Form | Solid metal cylinders |
| Main uses | Density, upthrust and specific heat capacity |
| Volume | πr²h from measured diameter and length |
| Measured with | Vernier caliper, balance, spring balance or thermometer |
| Metals, dimensions and number supplied | Confirm at enquiry |
Care & Handling
- Use tongs or a thread to move hot cylinders; never pick them straight out of boiling water by hand.
- Transfer heated cylinders to the calorimeter quickly to limit heat loss.
- Wipe and dry the cylinders after water work to avoid tarnish or rust.
- Keep the end faces free from dents so that length readings stay true.
Why Choose LabEquip
School and college laboratories buy metal cylinders because one set serves density, upthrust and heat practicals across the year. They are listed in our Physics Equipments; contact LabEquip to confirm the metals and dimensions.
Frequently Asked Questions
How is the volume of a metal cylinder calculated?
Measure the diameter with the outside jaws of a vernier caliper and halve it for the radius, measure the length, then use volume equals pi times radius squared times length.
How are metal cylinders used to find specific heat capacity?
Heat a weighed cylinder in boiling water, drop it without delay into a calorimeter holding a weighed quantity of cold water and record the highest steady temperature. Setting the heat given out by the cooling metal equal to the heat taken in by the water and the calorimeter gives the specific heat capacity.
Why should the cylinder be moved quickly from the boiling water?
It loses heat to the air during the transfer, and that loss is not counted in the calculation. A quick, direct transfer keeps the error small.
Can these cylinders be used to verify Archimedes’ principle?
Yes. Hang a cylinder from a spring balance, read its weight in air and fully submerged in water, and compare the loss of weight with the weight of water it displaces.
What is the difference between equal-volume and equal-mass sets?
In an equal-volume set the cylinders are the same size, so their masses differ with density. In an equal-mass set they weigh the same, so their sizes differ, with the least dense metal the largest. Both illustrate density from opposite directions.
Why measure the diameter in several places?
Small variations in diameter along the cylinder affect the volume, and the radius is squared in the formula. Averaging readings at both ends and the middle, turned through a right angle, gives a more reliable value.
Last Updated: October 2026










Reviews
There are no reviews yet.